[Tue Jun 4 22:57:56 2013] Detection parameters: Position = (391.2, 318.0) = 12 16 7.78 7 27 25.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 77.9 +/- 16.2 Background counts = 81.8 Rate = 0.004 +/- 0.0007 [Tue Jun 4 22:57:56 2013] Off-axis axis estimate = 6.87' [Tue Jun 4 23:00:57 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting [Tue Jun 4 23:00:57 2013] Initial guess for spatial extent in simple fitting = 9.86" [Tue Jun 4 23:00:57 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.175 [Tue Jun 4 23:00:57 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.86" [Tue Jun 4 23:44:32 2013] fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_src25.ximg exists [Tue Jun 4 23:44:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_src25.csv [Tue Jun 4 23:44:32 2013] fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_src25_1.ximg exists [Tue Jun 4 23:44:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_src25.csv [Tue Jun 4 23:44:32 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_src25_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 4 23:44:33 2013] fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists [Tue Jun 4 23:44:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_tfrozen_src25.csv [Tue Jun 4 23:44:33 2013] fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists [Tue Jun 4 23:44:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_tfrozen_src25.csv [Tue Jun 4 23:44:33 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604310201_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 00:14:24 2013] Source 26 is offset by -8.085073 and -3.442399 pixels which is larger than 2 X fitted extent = 1.273424 x 1.273424, not incorporating fit results [Wed Jun 5 00:14:24 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 00:14:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 00:14:24 2013] Assessing source extent using major [Wed Jun 5 00:14:24 2013] Source does appear to be extended [Wed Jun 5 00:14:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 00:14:36 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 00:14:36 2013] Initial guess for spatial extent in simple fitting = 9.86" [Wed Jun 5 00:14:36 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.175 [Wed Jun 5 00:14:36 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.86" [Wed Jun 5 00:58:24 2013] fullrun_pn_xmm0604310201_pi300-10000_cl_pass1_src25.ximg exists [Wed Jun 5 00:58:24 2013] fullrun_pn_xmm0604310201_pi300-10000_cl_pass1_src25_1.ximg exists [Wed Jun 5 00:58:24 2013] Fit fullrun_pn_xmm0604310201_pi300-10000_cl_pass1_src25 appears to have run properly [Wed Jun 5 00:58:24 2013] fullrun_pn_xmm0604310201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Wed Jun 5 00:58:24 2013] fullrun_pn_xmm0604310201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Wed Jun 5 00:58:24 2013] Fit fullrun_pn_xmm0604310201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly [Wed Jun 5 01:42:57 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 10.657364 pixels away [Wed Jun 5 01:42:57 2013] Spatial fit model total counts = 426.327000, observed total counts = 394.000000 [Wed Jun 5 01:42:57 2013] Offset between fit and detection position for source 26 = 0.419079 pixels [Wed Jun 5 01:42:57 2013] 422.218600 total counts/ 367.781000 bgd. counts: snr = 2.838601 Spatial fit parameters: Offset between fit and detection position for source 26 = 0.419079 pixels Position = (391.5, 317.8) = 12 16 7.68 7 27 23.5 Extent = 5.0 (3.9-6.9)", rotation angle = 0 Source counts = 54.4 +/- 20.5 Background counts = 367.8 Rate = 0.002 +/- 0.0008 [Wed Jun 5 01:42:57 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 01:42:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 01:42:57 2013] Assessing source extent using major axis lower bound [Wed Jun 5 01:42:57 2013] Source does appear to be extended [Wed Jun 5 01:42:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 01:43:19 2013] XMMSAS src. selection expression = ellipse(34015.232000, 27596.096600, 300.123009, 300.123009, 0.000000, X, Y) [Wed Jun 5 01:43:19 2013] Writing source region out to fullrun_pn_xmm0604310201_pi300-10000_pass1_cl_src26_src.reg [Wed Jun 5 01:43:19 2013] Extracting stamp from image fullrun_pn_xmm0604310201_pi300-10000_cl_sm2.00.img.gz, (374, 301) - (409, 335) [Wed Jun 5 01:43:19 2013] XMMSAS bgd. selection expression = annulus(34015.232000, 27596.096600, 500.205014, 1000.410029, X, Y) && !ellipse(32532.434479, 26149.016571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33028.765656, 25906.219452, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jun 5 01:43:19 2013] Writing fullrun_pn_xmm0604310201_pi300-10000_pass1_cl_src26.gif [Wed Jun 5 02:12:34 2013] Mean detx,y = (7023.06, 3251.13) [Wed Jun 5 02:12:39 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 5 02:12:56 2013] Binned source spectrum to 10 counts/bin [Wed Jun 5 02:12:57 2013] Setting source spectrum file to fullrun_pn_xmm0604310201_pi300-10000_pass1_cl_src26_src_b10.pi.gz [Wed Jun 5 02:12:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604310201_pi300-10000_pass1_cl_src26_bgd.pi.gz [Wed Jun 5 02:34:39 2013] Not generating rmf since there are only 54 counts [Wed Jun 5 02:34:39 2013] rmf not generated due to insufficient counts [Wed Jun 5 03:06:19 2013] Updating aperture counts using extracted products [Wed Jun 5 03:06:19 2013] Total counts from fullrun_pn_xmm0604310201_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 104.00 [Wed Jun 5 03:06:19 2013] Total counts from fullrun_pn_xmm0604310201_pi300-10000_pass1_cl_src26_bgd.pi.gz = 374.00 [Wed Jun 5 03:06:19 2013] Got source and background scale factors 286400.000000, 1947780.000000 [Wed Jun 5 03:06:19 2013] User source parameters: Position = (391.5, 317.8) = 12 16 7.68 7 27 23.5 Extent = 5.0 (3.9-6.9)", rotation angle = 0 Source aperture counts = 49.0 +/- 11.2 Background aperture counts = 55.0 Rate = 0.002 +/- 0.0004 [Wed Jun 5 03:06:23 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 5 03:06:23 2013] Using photon index=1.80, rate=0.002, arf fullrun_pn_xmm0604310201_pi300-10000_pass1_cl_src26.arf [Wed Jun 5 03:06:23 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 5 03:06:23 2013] Updating source flux to 8.6e-15 [Wed Jun 5 03:06:38 2013] Flag b found in src. 26 procflags, skipping spectral fitting [Wed Jun 5 03:06:38 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting [Wed Jun 5 03:06:49 2013] xmm0604310201/analysis//spectral/fullrun_pn_xmm0604310201_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete