[Sun May  5 11:28:00 2013] Detection parameters:
  Position = (285.9, 223.1) = 17 45 40.12 -29 4 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 575.1 +/- 34.9
  Background counts = 297.7
  Rate = 0.02 +/- 0.001

[Sun May  5 11:28:00 2013] Off-axis axis estimate = 5.54'
[Sun May  5 11:32:51 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Sun May  5 11:32:51 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Sun May  5 11:32:51 2013] source mask rpix=2.1, npix_max = 27, mask sum = 16, frac = 0.585
[Sun May  5 11:32:51 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 9.20"
[Sun May  5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src65.ximg exists
[Sun May  5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src65.csv
[Sun May  5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src65_1.ximg exists
[Sun May  5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src65.csv
[Sun May  5 14:25:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sun May  5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sun May  5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sun May  5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sun May  5 14:25:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:45:05 2013] Spatial fit model total counts = 3133.680000, observed total counts = 2640.000000
[Sun May  5 17:45:05 2013] Poor agreement between spatial fit and data for source 71
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 17:45:05 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:45:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:45:05 2013] Assessing source extent using major
[Sun May  5 17:45:05 2013] Source does appear to be extended
[Sun May  5 17:45:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 17:45:42 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Sun May  5 17:45:42 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Sun May  5 17:45:42 2013] source mask rpix=2.1, npix_max = 27, mask sum = 16, frac = 0.585
[Sun May  5 17:45:42 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 9.20"
[Sun May  5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src53.ximg exists
[Sun May  5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src53.csv
[Sun May  5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src53_1.ximg exists
[Sun May  5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src53.csv
[Sun May  5 19:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 19:48:36 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sun May  5 19:48:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sun May  5 19:48:36 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sun May  5 19:48:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sun May  5 19:48:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 23:05:07 2013] Spatial fit model total counts = 3135.740000, observed total counts = 2640.000000
[Sun May  5 23:05:07 2013] Poor agreement between spatial fit and data for source 71
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 23:05:07 2013] Vigneting correction estimate = 1.000000
[Sun May  5 23:05:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 23:05:07 2013] Assessing source extent using major
[Sun May  5 23:05:07 2013] Source does appear to be extended
[Sun May  5 23:05:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 23:05:36 2013] XMMSAS src. selection expression = ellipse(24825.949097, 19361.374435, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 23:05:36 2013] Writing source region out to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src71_src.reg
[Sun May  5 23:05:36 2013] Extracting stamp from image fullrun_pn_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (248, 186) - (323, 261)
[Sun May  5 23:05:36 2013] XMMSAS bgd. selection expression = annulus(24825.949097, 19361.374435, 1087.500000, 2175.000000, X, Y) && !ellipse(24927.477540, 24166.608200, 3324.288096, 2643.576076, 37.949400, X, Y) && !ellipse(26338.022797, 22332.741180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25677.962000, 22772.654000, 1269.080037, 1269.080037, 0.000000, X, Y) && !ellipse(24438.405090, 21999.091614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.555573, 21192.672928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22930.038000, 20893.153200, 1415.808041, 498.327214, 27.882000, X, Y) && !ellipse(23218.960754, 20770.808685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22354.002655, 18757.422974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23895.477800, 18786.162800, 392.925611, 392.925611, 0.000000, X, Y) && !ellipse(26797.547000, 17665.288400, 505.801615, 505.801615, 0.000000, X, Y)
[Sun May  5 23:05:36 2013] Writing fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src71.gif
[Mon May  6 00:17:15 2013] Mean detx,y = (391.23, -5009.72) 
[Mon May  6 00:17:18 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 00:17:27 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 00:17:28 2013] Setting source spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Mon May  6 00:17:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Mon May  6 01:36:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  6 01:36:40 2013] rmf not generated due to insufficient counts
[Mon May  6 06:23:56 2013] Updating aperture counts using extracted products
[Mon May  6 06:23:56 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src71_src_b10.pi.gz = 1660.00
[Mon May  6 06:23:56 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src71_bgd.pi.gz = 9655.00
[Mon May  6 06:23:56 2013] Got source and background scale factors 1037235.000000, 8180478.000000
[Mon May  6 06:23:57 2013] User source parameters:
  Position = (285.9, 223.1) = 17 45 40.12 -29 4 28.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 435.8 +/- 41.8
  Background aperture counts = 1224.2
  Rate = 0.01 +/- 0.001

[Mon May  6 06:23:57 2013] Updating counts from extracted products
[Mon May  6 06:23:57 2013] Set source signif. to 435.80/34.99 = 12.46
[Mon May  6 06:24:00 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 06:24:00 2013] Using photon index=1.80, rate=0.0105, arf fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src71.arf
[Mon May  6 06:24:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 06:24:00 2013] Updating source flux to 9.5e-14
[Mon May  6 06:25:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May  6 06:25:18 2013] xmm0604301001/analysis//spectral/fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete