[Sun May  5 11:28:00 2013] Detection parameters:
  Position = (262.2, 241.3) = 17 45 48.00 -29 3 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.4 +/- 31.4
  Background counts = 390.9
  Rate = 0.005 +/- 0.0009

[Sun May  5 11:28:00 2013] Off-axis axis estimate = 4.91'
[Sun May  5 11:32:51 2013] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Sun May  5 11:32:51 2013] Initial guess for spatial extent in simple fitting = 8.88"
[Sun May  5 11:32:51 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.967
[Sun May  5 11:32:51 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 8.88"
[Sun May  5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src56.ximg exists
[Sun May  5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src56.csv
[Sun May  5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src56_1.ximg exists
[Sun May  5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src56.csv
[Sun May  5 14:25:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sun May  5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src56.csv
[Sun May  5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sun May  5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src56.csv
[Sun May  5 14:25:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:45:05 2013] Warning, spatial fit 56 centroid is now closest to src. 66
[Sun May  5 17:45:05 2013] Spatial fit model total counts = 3684.720000, observed total counts = 3677.000000
[Sun May  5 17:45:05 2013] Offset between fit and detection position for source 62 = 1.720381 pixels
[Sun May  5 17:45:05 2013] Warning, changing simple spatial fit ID from 56 to 58
[Sun May  5 17:45:05 2013] 3693.220000 total counts/ 3451.890000 bgd. counts: snr = 4.107550
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 1.720381 pixels
  Position = (263.9, 240.9) = 17 45 47.44 -29 3 9.5
  Extent = 17.7 (17.6-35.4)" x 6.1 (4.0-8.9)", rotation angle = 208 (193-225) degrees
  Source counts = 241.3 +/- 60.8
  Background counts = 3451.9
  Rate = 0.006 +/- 0.001
[Sun May  5 17:45:05 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:45:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:45:05 2013] Assessing source extent using major axis lower bound
[Sun May  5 17:45:05 2013] Source does appear to be extended
[Sun May  5 17:45:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.97
[Sun May  5 17:45:05 2013] Source is asymmetric
[Sun May  5 17:45:05 2013] Source is confused with source 64
[Sun May  5 17:45:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 17:45:42 2013] Initial guess for spatial extent in simple fitting = 11.90"
[Sun May  5 17:45:42 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Sun May  5 17:45:42 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 11.90"
[Sun May  5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src45.ximg exists
[Sun May  5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src45.csv
[Sun May  5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src45_1.ximg exists
[Sun May  5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src45.csv
[Sun May  5 19:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 19:48:36 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sun May  5 19:48:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src45.csv
[Sun May  5 19:48:36 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sun May  5 19:48:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src45.csv
[Sun May  5 19:48:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 23:05:07 2013] Warning, spatial fit 45 centroid is now closest to src. 66
[Sun May  5 23:05:07 2013] Spatial fit model total counts = 3676.320000, observed total counts = 3677.000000
[Sun May  5 23:05:07 2013] Offset between fit and detection position for source 62 = 0.329187 pixels
[Sun May  5 23:05:07 2013] Warning, changing simple spatial fit ID from 45 to 47
[Sun May  5 23:05:07 2013] 3684.388000 total counts/ 3446.050000 bgd. counts: snr = 4.060060
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.329187 pixels
  Position = (264.1, 240.7) = 17 45 47.35 -29 3 10.3
  Extent = 17.7 (12.7-35.4)" x 6.2 (4.0-9.0)", rotation angle = 28 (12-45) degrees
  Source counts = 238.3 +/- 60.7
  Background counts = 3446.1
  Rate = 0.006 +/- 0.001
[Sun May  5 23:05:07 2013] Vigneting correction estimate = 1.000000
[Sun May  5 23:05:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 23:05:07 2013] Assessing source extent using major axis lower bound
[Sun May  5 23:05:07 2013] Source does appear to be extended
[Sun May  5 23:05:07 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.42
[Sun May  5 23:05:36 2013] XMMSAS src. selection expression = ellipse(22930.038000, 20893.153200, 1061.856031, 373.745411, 27.882000, X, Y)
[Sun May  5 23:05:36 2013] Writing source region out to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src62_src.reg
[Sun May  5 23:05:36 2013] Extracting stamp from image fullrun_pn_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (203, 180) - (325, 302)
[Sun May  5 23:05:36 2013] XMMSAS bgd. selection expression = annulus(22930.038000, 20893.153200, 1769.760051, 3539.520102, X, Y) && !ellipse(24927.477540, 24166.608200, 3324.288096, 2643.576076, 37.949400, X, Y) && !ellipse(26806.685913, 23058.735046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24595.414000, 24216.674000, 1184.568034, 943.104027, 30.589700, X, Y) && !ellipse(23892.382400, 24841.393800, 1181.560034, 716.420021, 65.763100, X, Y) && !ellipse(27052.092926, 25158.571167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.916000, 26294.104000, 2297.168066, 1609.784046, 7.028590, X, Y) && !ellipse(26558.743347, 24833.109711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.997345, 24055.103821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26069.278076, 22926.384491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.726013, 22836.623260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24800.872345, 22663.573761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.022797, 22332.741180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25677.962000, 22772.654000, 1269.080037, 1269.080037, 0.000000, X, Y) && !ellipse(24438.405090, 21999.091614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.555573, 21192.672928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23218.960754, 20770.808685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19851.585400, 21082.898200, 1544.728044, 849.392024, 234.217000, X, Y) && !ellipse(21741.928131, 20469.903595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21555.068497, 19891.063400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24825.949097, 19361.374435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22354.002655, 18757.422974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23895.477800, 18786.162800, 392.925611, 392.925611, 0.000000, X, Y) && !ellipse(26797.547000, 17665.288400, 505.801615, 505.801615, 0.000000, X, Y)
[Sun May  5 23:05:36 2013] Writing fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src62.gif
[Mon May  6 00:12:37 2013] Mean detx,y = (2168.75, -3332.32) 
[Mon May  6 00:12:41 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 00:12:57 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 00:12:58 2013] Setting source spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Mon May  6 00:12:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Mon May  6 06:23:55 2013] Updating aperture counts using extracted products
[Mon May  6 06:23:55 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 2327.00
[Mon May  6 06:23:55 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src62_bgd.pi.gz = 15380.00
[Mon May  6 06:23:55 2013] Got source and background scale factors 1193790.000000, 10891575.000000
[Mon May  6 06:23:55 2013] User source parameters:
  Position = (264.1, 240.7) = 17 45 47.35 -29 3 10.3
  Extent = 17.7 (12.7-35.4)" x 6.2 (4.0-9.0)", rotation angle = 28 (12-45) degrees
  Source aperture counts = 641.2 +/- 49.2
  Background aperture counts = 1685.8
  Rate = 0.02 +/- 0.001

[Mon May  6 06:24:00 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 06:24:00 2013] Using photon index=1.80, rate=0.00574, arf fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src62.arf
[Mon May  6 06:24:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 06:24:00 2013] Updating source flux to 4.5e-14
[Mon May  6 06:25:01 2013] Flag c found in src. 62 procflags, skipping spectral fitting
[Mon May  6 06:25:18 2013] xmm0604301001/analysis//spectral/fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete