[Sun May  5 11:28:00 2013] Detection parameters:
  Position = (293.7, 261.1) = 17 45 37.54 -29 1 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 508.9 +/- 42.5
  Background counts = 467.7
  Rate = 0.01 +/- 0.001

[Sun May  5 11:28:00 2013] Off-axis axis estimate = 2.73'
[Sun May  5 11:32:51 2013] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Sun May  5 11:32:51 2013] Initial guess for spatial extent in simple fitting = 7.79"
[Sun May  5 11:32:51 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.952
[Sun May  5 11:32:51 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 7.79"
[Sun May  5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src54.ximg exists
[Sun May  5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src54.csv
[Sun May  5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src54_1.ximg exists
[Sun May  5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src54.csv
[Sun May  5 14:25:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sun May  5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sun May  5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sun May  5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sun May  5 14:25:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:45:05 2013] Spatial fit model total counts = 4620.400000, observed total counts = 4619.000000
[Sun May  5 17:45:05 2013] Offset between fit and detection position for source 59 = 2.481441 pixels
[Sun May  5 17:45:05 2013] Warning, changing simple spatial fit ID from 54 to 52
[Sun May  5 17:45:05 2013] 4592.075000 total counts/ 4308.920000 bgd. counts: snr = 4.313601
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 2.481441 pixels
  Position = (295.7, 262.5) = 17 45 36.88 -29 1 35.4
  Extent = 15.9 (15.8-31.7)", rotation angle = 0
  Source counts = 283.2 +/- 67.8
  Background counts = 4308.9
  Rate = 0.007 +/- 0.002
[Sun May  5 17:45:05 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:45:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:45:05 2013] Assessing source extent using major axis lower bound
[Sun May  5 17:45:05 2013] Source does appear to be extended
[Sun May  5 17:45:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 17:45:05 2013] Source is confused with source 54
[Sun May  5 17:45:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 17:45:42 2013] Initial guess for spatial extent in simple fitting = 15.86"
[Sun May  5 17:45:42 2013] source mask rpix=3.6, npix_max = 68, mask sum = 72, frac = 1.047
[Sun May  5 17:45:42 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 15.86"
[Sun May  5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src43.ximg exists
[Sun May  5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src43.csv
[Sun May  5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src43_1.ximg exists
[Sun May  5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src43.csv
[Sun May  5 19:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 19:48:36 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sun May  5 19:48:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun May  5 19:48:36 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sun May  5 19:48:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun May  5 19:48:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 23:05:07 2013] Spatial fit model total counts = 4619.700000, observed total counts = 4619.000000
[Sun May  5 23:05:07 2013] Offset between fit and detection position for source 59 = 0.222782 pixels
[Sun May  5 23:05:07 2013] Warning, changing simple spatial fit ID from 43 to 42
[Sun May  5 23:05:07 2013] 4605.425000 total counts/ 4356.820000 bgd. counts: snr = 3.766388
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.222782 pixels
  Position = (295.7, 262.3) = 17 45 36.88 -29 1 36.3
  Extent = 15.9 (15.8-31.7)", rotation angle = 0
  Source counts = 248.6 +/- 67.9
  Background counts = 4356.8
  Rate = 0.006 +/- 0.002
[Sun May  5 23:05:07 2013] Vigneting correction estimate = 1.000000
[Sun May  5 23:05:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 23:05:07 2013] Assessing source extent using major axis lower bound
[Sun May  5 23:05:07 2013] Source does appear to be extended
[Sun May  5 23:05:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 23:05:36 2013] XMMSAS src. selection expression = ellipse(25677.962000, 22772.654000, 951.810027, 951.810027, 0.000000, X, Y)
[Sun May  5 23:05:36 2013] Writing source region out to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src59_src.reg
[Sun May  5 23:05:36 2013] Extracting stamp from image fullrun_pn_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (241, 208) - (350, 317)
[Sun May  5 23:05:36 2013] XMMSAS bgd. selection expression = annulus(25677.962000, 22772.654000, 1586.350046, 3172.700091, X, Y) && !ellipse(24927.477540, 24166.608200, 3324.288096, 2643.576076, 37.949400, X, Y) && !ellipse(26806.685913, 23058.735046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24595.414000, 24216.674000, 1184.568034, 943.104027, 30.589700, X, Y) && !ellipse(23892.382400, 24841.393800, 1181.560034, 716.420021, 65.763100, X, Y) && !ellipse(27052.092926, 25158.571167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27583.884674, 26221.607727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.916000, 26294.104000, 2297.168066, 1609.784046, 7.028590, X, Y) && !ellipse(25109.800934, 25864.129272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.057556, 26044.936768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27280.518372, 25806.751434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27888.312988, 25272.888763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26455.550323, 25356.753174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.743347, 24833.109711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.997345, 24055.103821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26069.278076, 22926.384491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.726013, 22836.623260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24800.872345, 22663.573761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.022797, 22332.741180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24438.405090, 21999.091614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.555573, 21192.672928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22930.038000, 20893.153200, 1415.808041, 498.327214, 27.882000, X, Y) && !ellipse(23218.960754, 20770.808685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21741.928131, 20469.903595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24825.949097, 19361.374435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22354.002655, 18757.422974, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 23:05:36 2013] Writing fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src59.gif
[Mon May  6 00:10:32 2013] Mean detx,y = (-564.38, -1636.03) 
[Mon May  6 00:10:37 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 00:11:00 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 00:11:01 2013] Setting source spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Mon May  6 00:11:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Mon May  6 06:23:54 2013] Updating aperture counts using extracted products
[Mon May  6 06:23:54 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 8468.00
[Mon May  6 06:23:54 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src59_bgd.pi.gz = 7637.00
[Mon May  6 06:23:54 2013] Got source and background scale factors 2490592.000000, 5452775.000000
[Mon May  6 06:23:55 2013] User source parameters:
  Position = (295.7, 262.3) = 17 45 36.88 -29 1 36.3
  Extent = 15.9 (15.8-31.7)", rotation angle = 0
  Source aperture counts = 4979.7 +/- 93.0
  Background aperture counts = 3488.3
  Rate = 0.1 +/- 0.002

[Mon May  6 06:24:00 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 06:24:00 2013] Using photon index=1.80, rate=0.00598, arf fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src59.arf
[Mon May  6 06:24:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 06:24:00 2013] Updating source flux to 4.1e-14
[Mon May  6 06:25:01 2013] Flag c found in src. 59 procflags, skipping spectral fitting
[Mon May  6 06:25:18 2013] xmm0604301001/analysis//spectral/fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete