[Sun May 5 11:28:00 2013] Detection parameters: Position = (277.2, 263.0) = 17 45 43.00 -29 1 28.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 456.3 +/- 33.1 Background counts = 517.1 Rate = 0.01 +/- 0.001 [Sun May 5 11:28:00 2013] Off-axis axis estimate = 2.99' [Sun May 5 11:32:51 2013] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting [Sun May 5 11:32:51 2013] Initial guess for spatial extent in simple fitting = 7.92" [Sun May 5 11:32:51 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.742 [Sun May 5 11:32:51 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 7.92" [Sun May 5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src50.ximg exists [Sun May 5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src50.csv [Sun May 5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src50_1.ximg exists [Sun May 5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src50.csv [Sun May 5 14:25:03 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src50_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src50.ximg exists [Sun May 5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src50.csv [Sun May 5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists [Sun May 5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src50.csv [Sun May 5 14:25:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src50_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 17:45:05 2013] Spatial fit model total counts = 6927.820000, observed total counts = 4528.000000 [Sun May 5 17:45:05 2013] Poor agreement between spatial fit and data for source 55 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 5 17:45:05 2013] Vigneting correction estimate = 1.000000 [Sun May 5 17:45:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 17:45:05 2013] Assessing source extent using major [Sun May 5 17:45:05 2013] Source does appear to be extended [Sun May 5 17:45:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 17:45:42 2013] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting [Sun May 5 17:45:42 2013] Initial guess for spatial extent in simple fitting = 7.92" [Sun May 5 17:45:42 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.742 [Sun May 5 17:45:42 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 7.92" [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src40.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src40.csv [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src40_1.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src40.csv [Sun May 5 19:48:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src40_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src40.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src40.csv [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src40.csv [Sun May 5 19:48:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src40_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 23:05:07 2013] Source 55 is offset by 2.165173 and -4.019917 pixels which is larger than 2 X fitted extent = 1.429085 x 1.429085, not incorporating fit results [Sun May 5 23:05:07 2013] Spatial fit model total counts = 6909.410000, observed total counts = 4528.000000 [Sun May 5 23:05:07 2013] Poor agreement between spatial fit and data for source 55 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 5 23:05:07 2013] Vigneting correction estimate = 1.000000 [Sun May 5 23:05:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 23:05:07 2013] Assessing source extent using major [Sun May 5 23:05:07 2013] Source does appear to be extended [Sun May 5 23:05:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 23:05:35 2013] XMMSAS src. selection expression = ellipse(24070.726013, 22836.623260, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 23:05:35 2013] Writing source region out to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src55_src.reg [Sun May 5 23:05:35 2013] Extracting stamp from image fullrun_pn_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (240, 226) - (315, 301) [Sun May 5 23:05:35 2013] XMMSAS bgd. selection expression = annulus(24070.726013, 22836.623260, 1087.500000, 2175.000000, X, Y) && !ellipse(24927.477540, 24166.608200, 3324.288096, 2643.576076, 37.949400, X, Y) && !ellipse(26806.685913, 23058.735046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24595.414000, 24216.674000, 1184.568034, 943.104027, 30.589700, X, Y) && !ellipse(23892.382400, 24841.393800, 1181.560034, 716.420021, 65.763100, X, Y) && !ellipse(27052.092926, 25158.571167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.916000, 26294.104000, 2297.168066, 1609.784046, 7.028590, X, Y) && !ellipse(25109.800934, 25864.129272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26455.550323, 25356.753174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.743347, 24833.109711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.997345, 24055.103821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26069.278076, 22926.384491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24800.872345, 22663.573761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.022797, 22332.741180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25677.962000, 22772.654000, 1269.080037, 1269.080037, 0.000000, X, Y) && !ellipse(24438.405090, 21999.091614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.555573, 21192.672928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22930.038000, 20893.153200, 1415.808041, 498.327214, 27.882000, X, Y) && !ellipse(23218.960754, 20770.808685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21741.928131, 20469.903595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21555.068497, 19891.063400, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 23:05:35 2013] Writing fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src55.gif [Mon May 6 00:08:22 2013] Mean detx,y = (1021.82, -1536.17) [Mon May 6 00:08:26 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 00:08:44 2013] Binned source spectrum to 10 counts/bin [Mon May 6 00:08:44 2013] Setting source spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src55_src_b10.pi.gz [Mon May 6 00:08:44 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src55_bgd.pi.gz [Mon May 6 01:17:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 01:17:52 2013] rmf not generated due to insufficient counts [Mon May 6 06:23:54 2013] Updating aperture counts using extracted products [Mon May 6 06:23:54 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 2758.00 [Mon May 6 06:23:54 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src55_bgd.pi.gz = 1611.00 [Mon May 6 06:23:54 2013] Got source and background scale factors 895923.000000, 932786.000000 [Mon May 6 06:23:54 2013] User source parameters: Position = (277.2, 263.0) = 17 45 43.00 -29 1 28.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1210.7 +/- 53.5 Background aperture counts = 1547.3 Rate = 0.03 +/- 0.001 [Mon May 6 06:23:54 2013] Updating counts from extracted products [Mon May 6 06:23:54 2013] Set source signif. to 1210.67/39.34 = 30.78 [Mon May 6 06:24:00 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 06:24:00 2013] Using photon index=1.80, rate=0.0291, arf fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src55.arf [Mon May 6 06:24:00 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 06:24:00 2013] Updating source flux to 2e-13 [Mon May 6 06:25:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 06:25:18 2013] xmm0604301001/analysis//spectral/fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete