[Sun May 5 11:27:59 2013] Detection parameters: Position = (311.5, 289.7) = 17 45 31.64 -28 59 34.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1237.9 +/- 123.2 Background counts = 399.4 Rate = 0.03 +/- 0.003 [Sun May 5 11:28:00 2013] Off-axis axis estimate = 1.14' [Sun May 5 11:32:51 2013] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting [Sun May 5 11:32:51 2013] Initial guess for spatial extent in simple fitting = 7.00" [Sun May 5 11:32:51 2013] source mask rpix=1.6, npix_max = 17, mask sum = 4, frac = 0.225 [Sun May 5 11:32:51 2013] Skipping simple spatial due to low active detector fraction [Sun May 5 17:45:05 2013] Source 5 is offset by -5.228656 and 5.129186 pixels which is larger than 2 X fitted extent = 6.729701 x 0.841214, not incorporating fit results [Sun May 5 17:45:05 2013] Vigneting correction estimate = 1.000000 [Sun May 5 17:45:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 17:45:05 2013] Assessing source extent using major [Sun May 5 17:45:05 2013] Source does appear to be extended [Sun May 5 17:45:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 17:45:05 2013] Source is confused with source 47 [Sun May 5 17:45:05 2013] Source is confused with source 48 [Sun May 5 17:45:42 2013] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting [Sun May 5 17:45:42 2013] Initial guess for spatial extent in simple fitting = 7.00" [Sun May 5 17:45:42 2013] source mask rpix=1.6, npix_max = 17, mask sum = 4, frac = 0.225 [Sun May 5 17:45:42 2013] Skipping simple spatial due to low active detector fraction [Sun May 5 23:05:07 2013] Vigneting correction estimate = 1.000000 [Sun May 5 23:05:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 23:05:07 2013] Assessing source extent using major [Sun May 5 23:05:07 2013] Source does appear to be extended [Sun May 5 23:05:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 23:05:34 2013] Counts = 1237.923340, rescaling region sizes by 2.000000 [Sun May 5 23:05:34 2013] XMMSAS src. selection expression = ellipse(27052.092926, 25158.571167, 1305.000000, 1305.000000, 0.000000, X, Y) [Sun May 5 23:05:34 2013] Writing source region out to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src5_src.reg [Sun May 5 23:05:34 2013] Extracting stamp from image fullrun_pn_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (237, 215) - (387, 365) [Sun May 5 23:05:34 2013] XMMSAS bgd. selection expression = annulus(27052.092926, 25158.571167, 4350.000000, 8700.000000, X, Y) && !ellipse(24927.477540, 24166.608200, 3324.288096, 2643.576076, 37.949400, X, Y) && !ellipse(26806.685913, 23058.735046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24595.414000, 24216.674000, 1184.568034, 943.104027, 30.589700, X, Y) && !ellipse(23892.382400, 24841.393800, 1181.560034, 716.420021, 65.763100, X, Y) && !ellipse(35561.052000, 35041.138000, 1229.824035, 622.876018, 22.755400, X, Y) && !ellipse(22182.898000, 33512.665600, 434.796813, 311.408809, 0.436289, X, Y) && !ellipse(21844.283493, 32866.330963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22108.243851, 31272.153137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17727.481000, 29541.622600, 1629.152047, 376.893611, 99.300090, X, Y) && !ellipse(18929.580400, 29698.501400, 1348.488039, 461.188813, 313.983000, X, Y) && !ellipse(22300.540985, 29107.651123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21055.232681, 28887.289001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25958.290500, 28736.313800, 316.729383, 316.729383, 0.000000, X, Y) && !ellipse(19282.886459, 28493.800385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21913.042000, 28629.546000, 483.108014, 483.108014, 0.000000, X, Y) && !ellipse(31239.906000, 26698.732000, 1406.736040, 1406.736040, 0.000000, X, Y) && !ellipse(28023.666382, 26845.263489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24798.832000, 27135.548000, 1148.584033, 1148.584033, 0.000000, X, Y) && !ellipse(23516.140020, 26502.432600, 452.892813, 452.892813, 0.000000, X, Y) && !ellipse(31308.326600, 26358.775400, 1390.456040, 658.568819, 112.113600, X, Y) && !ellipse(27583.884674, 26221.607727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.916000, 26294.104000, 2297.168066, 1609.784046, 7.028590, X, Y) && !ellipse(25109.800934, 25864.129272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.057556, 26044.936768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27280.518372, 25806.751434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27888.312988, 25272.888763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26455.550323, 25356.753174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.743347, 24833.109711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17720.661911, 24888.281219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.997345, 24055.103821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26069.278076, 22926.384491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.726013, 22836.623260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24800.872345, 22663.573761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.022797, 22332.741180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25677.962000, 22772.654000, 1269.080037, 1269.080037, 0.000000, X, Y) && !ellipse(24438.405090, 21999.091614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.555573, 21192.672928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22930.038000, 20893.153200, 1415.808041, 498.327214, 27.882000, X, Y) && !ellipse(23218.960754, 20770.808685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19851.585400, 21082.898200, 1544.728044, 849.392024, 234.217000, X, Y) && !ellipse(21741.928131, 20469.903595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21555.068497, 19891.063400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24825.949097, 19361.374435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22354.002655, 18757.422974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23895.477800, 18786.162800, 392.925611, 392.925611, 0.000000, X, Y) && !ellipse(26797.547000, 17665.288400, 505.801615, 505.801615, 0.000000, X, Y) && !ellipse(30857.533142, 16927.228973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32752.252319, 16563.158081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27486.915039, 16197.603027, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 23:05:34 2013] Writing fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src5.gif [Sun May 5 23:26:24 2013] Mean detx,y = (-2001.86, 622.88) [Sun May 5 23:26:30 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 23:28:36 2013] Binned source spectrum to 10 counts/bin [Sun May 5 23:28:36 2013] Setting source spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Sun May 5 23:28:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src5_bgd.pi.gz [Mon May 6 00:31:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 00:31:47 2013] rmf not generated due to insufficient counts [Mon May 6 06:23:45 2013] Updating aperture counts using extracted products [Mon May 6 06:23:45 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 12975.00 [Mon May 6 06:23:45 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src5_bgd.pi.gz = 136619.00 [Mon May 6 06:23:45 2013] Got source and background scale factors 4633171.000000, 124712445.000000 [Mon May 6 06:23:45 2013] User source parameters: Position = (311.5, 289.7) = 17 45 31.64 -28 59 34.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 7899.5 +/- 114.9 Background aperture counts = 5075.5 Rate = 0.2 +/- 0.003 [Mon May 6 06:23:45 2013] Updating counts from extracted products [Mon May 6 06:23:45 2013] Set source signif. to 7899.49/71.24 = 110.88 [Mon May 6 06:23:59 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 06:23:59 2013] Using photon index=1.80, rate=0.19, arf fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src5.arf [Mon May 6 06:23:59 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 06:23:59 2013] Getting flux using calc_pl_flux failed [Mon May 6 06:25:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 06:25:18 2013] xmm0604301001/analysis//spectral/fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete