[Sun May 5 11:28:00 2013] Detection parameters: Position = (305.8, 286.0) = 17 45 33.52 -28 59 52.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 192.0 +/- 32.8 Background counts = 463.8 Rate = 0.005 +/- 0.0008 [Sun May 5 11:28:00 2013] Off-axis axis estimate = 1.05' [Sun May 5 11:32:51 2013] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting [Sun May 5 11:32:51 2013] Initial guess for spatial extent in simple fitting = 6.95" [Sun May 5 11:32:51 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.908 [Sun May 5 11:32:51 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 6.95" [Sun May 5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src43.ximg exists [Sun May 5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src43.csv [Sun May 5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src43_1.ximg exists [Sun May 5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src43.csv [Sun May 5 14:25:03 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src43_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src43.ximg exists [Sun May 5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src43.csv [Sun May 5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists [Sun May 5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src43.csv [Sun May 5 14:25:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src43_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 17:45:05 2013] Source 48 is offset by 8.039441 and -0.818785 pixels which is larger than 2 X fitted extent = 3.500616 x 3.500616, not incorporating fit results [Sun May 5 17:45:05 2013] Source 48 is offset by 6.224084 and 4.752870 pixels which is larger than 2 X fitted extent = 3.597333 x 6.393747, not incorporating fit results [Sun May 5 17:45:05 2013] Vigneting correction estimate = 1.000000 [Sun May 5 17:45:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 17:45:05 2013] Assessing source extent using major [Sun May 5 17:45:05 2013] Source does appear to be extended [Sun May 5 17:45:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 17:45:05 2013] Source is confused with source 5 [Sun May 5 17:45:42 2013] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting [Sun May 5 17:45:42 2013] Initial guess for spatial extent in simple fitting = 6.95" [Sun May 5 17:45:42 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.908 [Sun May 5 17:45:42 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 6.95" [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src35.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src35.csv [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src35_1.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src35.csv [Sun May 5 19:48:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src35.csv [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src35.csv [Sun May 5 19:48:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 23:05:07 2013] Source 48 is offset by 8.039441 and -1.076417 pixels which is larger than 2 X fitted extent = 3.429927 x 3.429927, not incorporating fit results [Sun May 5 23:05:07 2013] Source 48 is offset by 6.224130 and 5.358686 pixels which is larger than 2 X fitted extent = 5.087954 x 5.087954, not incorporating fit results [Sun May 5 23:05:07 2013] Vigneting correction estimate = 1.000000 [Sun May 5 23:05:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 23:05:07 2013] Assessing source extent using major [Sun May 5 23:05:07 2013] Source does appear to be extended [Sun May 5 23:05:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 23:05:35 2013] XMMSAS src. selection expression = ellipse(26558.743347, 24833.109711, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 23:05:35 2013] Writing source region out to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src48_src.reg [Sun May 5 23:05:35 2013] Extracting stamp from image fullrun_pn_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (268, 248) - (343, 323) [Sun May 5 23:05:35 2013] XMMSAS bgd. selection expression = annulus(26558.743347, 24833.109711, 1087.500000, 2175.000000, X, Y) && !ellipse(24927.477540, 24166.608200, 3324.288096, 2643.576076, 37.949400, X, Y) && !ellipse(26806.685913, 23058.735046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24595.414000, 24216.674000, 1184.568034, 943.104027, 30.589700, X, Y) && !ellipse(23892.382400, 24841.393800, 1181.560034, 716.420021, 65.763100, X, Y) && !ellipse(27052.092926, 25158.571167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28023.666382, 26845.263489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24798.832000, 27135.548000, 1148.584033, 1148.584033, 0.000000, X, Y) && !ellipse(27583.884674, 26221.607727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.916000, 26294.104000, 2297.168066, 1609.784046, 7.028590, X, Y) && !ellipse(25109.800934, 25864.129272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.057556, 26044.936768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27280.518372, 25806.751434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27888.312988, 25272.888763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26455.550323, 25356.753174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.997345, 24055.103821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26069.278076, 22926.384491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.726013, 22836.623260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24800.872345, 22663.573761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.022797, 22332.741180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25677.962000, 22772.654000, 1269.080037, 1269.080037, 0.000000, X, Y) && !ellipse(24438.405090, 21999.091614, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 23:05:35 2013] Writing fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src48.gif [Mon May 6 00:03:52 2013] Mean detx,y = (-1533.31, 355.31) [Mon May 6 00:03:55 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 00:04:11 2013] Binned source spectrum to 10 counts/bin [Mon May 6 00:04:11 2013] Setting source spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src48_src_b10.pi.gz [Mon May 6 00:04:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src48_bgd.pi.gz [Mon May 6 01:13:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 01:13:41 2013] rmf not generated due to insufficient counts [Mon May 6 06:23:52 2013] Updating aperture counts using extracted products [Mon May 6 06:23:52 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 3994.00 [Mon May 6 06:23:52 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src48_bgd.pi.gz = 1255.00 [Mon May 6 06:23:52 2013] Got source and background scale factors 1188792.000000, 710625.000000 [Mon May 6 06:23:52 2013] User source parameters: Position = (305.8, 286.0) = 17 45 33.52 -28 59 52.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1894.5 +/- 64.2 Background aperture counts = 2099.5 Rate = 0.05 +/- 0.002 [Mon May 6 06:23:52 2013] Updating counts from extracted products [Mon May 6 06:23:52 2013] Set source signif. to 1894.53/45.82 = 41.35 [Mon May 6 06:23:59 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 06:23:59 2013] Using photon index=1.80, rate=0.0456, arf fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src48.arf [Mon May 6 06:23:59 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 06:23:59 2013] Updating source flux to 3.2e-13 [Mon May 6 06:25:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 06:25:18 2013] xmm0604301001/analysis//spectral/fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete