[Sun May 5 11:27:59 2013] Detection parameters: Position = (322.7, 309.1) = 17 45 27.94 -28 58 14.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 169.8 +/- 29.6 Background counts = 341.6 Rate = 0.005 +/- 0.0008 [Sun May 5 11:28:00 2013] Off-axis axis estimate = 1.92' [Sun May 5 11:32:51 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting [Sun May 5 11:32:51 2013] Initial guess for spatial extent in simple fitting = 7.39" [Sun May 5 11:32:51 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.034 [Sun May 5 11:32:51 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 7.39" [Sun May 5 14:25:02 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src29.ximg exists [Sun May 5 14:25:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src29.csv [Sun May 5 14:25:02 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src29_1.ximg exists [Sun May 5 14:25:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src29.csv [Sun May 5 14:25:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Sun May 5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src29.csv [Sun May 5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Sun May 5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src29.csv [Sun May 5 14:25:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 17:45:05 2013] Source 33 is offset by -5.950616 and -2.584875 pixels which is larger than 2 X fitted extent = 1.004768 x 0.851140, not incorporating fit results [Sun May 5 17:45:05 2013] Vigneting correction estimate = 1.000000 [Sun May 5 17:45:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 17:45:05 2013] Assessing source extent using major [Sun May 5 17:45:05 2013] Source does appear to be extended [Sun May 5 17:45:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 17:45:42 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting [Sun May 5 17:45:42 2013] Initial guess for spatial extent in simple fitting = 7.39" [Sun May 5 17:45:42 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.034 [Sun May 5 17:45:42 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 7.39" [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src23.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src23.csv [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src23_1.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src23.csv [Sun May 5 19:48:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src23_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src23.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src23.csv [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src23.csv [Sun May 5 19:48:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src23_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 23:05:07 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 27.853373 pixels away [Sun May 5 23:05:07 2013] Source 33 is offset by -5.682938 and -2.607528 pixels which is larger than 2 X fitted extent = 0.965513 x 0.965513, not incorporating fit results [Sun May 5 23:05:07 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 30.140200 pixels away [Sun May 5 23:05:07 2013] Vigneting correction estimate = 1.000000 [Sun May 5 23:05:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 23:05:07 2013] Assessing source extent using major [Sun May 5 23:05:07 2013] Source does appear to be extended [Sun May 5 23:05:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 23:05:35 2013] XMMSAS src. selection expression = ellipse(28023.666382, 26845.263489, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 23:05:35 2013] Writing source region out to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src33_src.reg [Sun May 5 23:05:35 2013] Extracting stamp from image fullrun_pn_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (285, 272) - (360, 347) [Sun May 5 23:05:35 2013] XMMSAS bgd. selection expression = annulus(28023.666382, 26845.263489, 1087.500000, 2175.000000, X, Y) && !ellipse(24927.477540, 24166.608200, 3324.288096, 2643.576076, 37.949400, X, Y) && !ellipse(27052.092926, 25158.571167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25958.290500, 28736.313800, 316.729383, 316.729383, 0.000000, X, Y) && !ellipse(31239.906000, 26698.732000, 1406.736040, 1406.736040, 0.000000, X, Y) && !ellipse(24798.832000, 27135.548000, 1148.584033, 1148.584033, 0.000000, X, Y) && !ellipse(31308.326600, 26358.775400, 1390.456040, 658.568819, 112.113600, X, Y) && !ellipse(27583.884674, 26221.607727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.916000, 26294.104000, 2297.168066, 1609.784046, 7.028590, X, Y) && !ellipse(25109.800934, 25864.129272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27280.518372, 25806.751434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27888.312988, 25272.888763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26455.550323, 25356.753174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.743347, 24833.109711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.997345, 24055.103821, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 23:05:35 2013] Writing fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src33.gif [Sun May 5 23:44:58 2013] Mean detx,y = (-3137.35, 2249.57) [Sun May 5 23:45:01 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 23:45:16 2013] Binned source spectrum to 10 counts/bin [Sun May 5 23:45:17 2013] Setting source spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Sun May 5 23:45:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src33_bgd.pi.gz [Mon May 6 00:55:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 00:55:18 2013] rmf not generated due to insufficient counts [Mon May 6 06:23:49 2013] Updating aperture counts using extracted products [Mon May 6 06:23:49 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 2258.00 [Mon May 6 06:23:50 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src33_bgd.pi.gz = 8726.00 [Mon May 6 06:23:50 2013] Got source and background scale factors 1214894.000000, 6234597.000000 [Mon May 6 06:23:50 2013] User source parameters: Position = (322.7, 309.1) = 17 45 27.94 -28 58 14.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 557.6 +/- 48.5 Background aperture counts = 1700.4 Rate = 0.01 +/- 0.001 [Mon May 6 06:23:50 2013] Updating counts from extracted products [Mon May 6 06:23:50 2013] Set source signif. to 557.62/41.24 = 13.52 [Mon May 6 06:23:59 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 06:23:59 2013] Using photon index=1.80, rate=0.0134, arf fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src33.arf [Mon May 6 06:23:59 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 06:23:59 2013] Updating source flux to 1e-13 [Mon May 6 06:25:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 06:25:18 2013] xmm0604301001/analysis//spectral/fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete