[Sun May 5 11:27:59 2013] Detection parameters: Position = (254.7, 360.0) = 17 45 50.47 -28 54 31.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 331.5 +/- 33.3 Background counts = 358.6 Rate = 0.01 +/- 0.001 [Sun May 5 11:28:00 2013] Off-axis axis estimate = 5.48' [Sun May 5 11:32:51 2013] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting [Sun May 5 11:32:51 2013] Initial guess for spatial extent in simple fitting = 9.17" [Sun May 5 11:32:51 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.103 [Sun May 5 11:32:51 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.17" [Sun May 5 14:25:02 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src18.ximg exists [Sun May 5 14:25:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src18.csv [Sun May 5 14:25:02 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src18_1.ximg exists [Sun May 5 14:25:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src18.csv [Sun May 5 14:25:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src18.ximg exists [Sun May 5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src18.csv [Sun May 5 14:25:04 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists [Sun May 5 14:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src18.csv [Sun May 5 14:25:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 17:45:05 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.154302 pixels away [Sun May 5 17:45:05 2013] Vigneting correction estimate = 1.000000 [Sun May 5 17:45:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 17:45:05 2013] Assessing source extent using major [Sun May 5 17:45:05 2013] Source does appear to be extended [Sun May 5 17:45:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 17:45:42 2013] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting [Sun May 5 17:45:42 2013] Initial guess for spatial extent in simple fitting = 9.17" [Sun May 5 17:45:42 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.103 [Sun May 5 17:45:42 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 9.17" [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src13.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src13.csv [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src13_1.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src13.csv [Sun May 5 19:48:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src13.csv [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src13.csv [Sun May 5 19:48:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 23:05:07 2013] Source 21 is offset by 8.503171 and 2.114588 pixels which is larger than 2 X fitted extent = 1.053660 x 1.053660, not incorporating fit results [Sun May 5 23:05:07 2013] Vigneting correction estimate = 1.000000 [Sun May 5 23:05:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 23:05:07 2013] Assessing source extent using major [Sun May 5 23:05:07 2013] Source does appear to be extended [Sun May 5 23:05:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 23:05:34 2013] XMMSAS src. selection expression = ellipse(22108.243851, 31272.153137, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 23:05:34 2013] Writing source region out to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src21_src.reg [Sun May 5 23:05:34 2013] Extracting stamp from image fullrun_pn_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (217, 323) - (292, 398) [Sun May 5 23:05:34 2013] XMMSAS bgd. selection expression = annulus(22108.243851, 31272.153137, 1087.500000, 2175.000000, X, Y) && !ellipse(22182.898000, 33512.665600, 434.796813, 311.408809, 0.436289, X, Y) && !ellipse(21844.283493, 32866.330963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18929.580400, 29698.501400, 1348.488039, 461.188813, 313.983000, X, Y) && !ellipse(22300.540985, 29107.651123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21055.232681, 28887.289001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19282.886459, 28493.800385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21913.042000, 28629.546000, 483.108014, 483.108014, 0.000000, X, Y) [Sun May 5 23:05:34 2013] Writing fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src21.gif [Sun May 5 23:37:04 2013] Mean detx,y = (2429.15, 7038.01) [Sun May 5 23:37:07 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 23:37:23 2013] Binned source spectrum to 10 counts/bin [Sun May 5 23:37:23 2013] Setting source spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src21_src_b10.pi.gz [Sun May 5 23:37:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src21_bgd.pi.gz [Mon May 6 00:40:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 00:40:08 2013] rmf not generated due to insufficient counts [Mon May 6 06:23:47 2013] Updating aperture counts using extracted products [Mon May 6 06:23:47 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 2499.00 [Mon May 6 06:23:47 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src21_bgd.pi.gz = 11328.00 [Mon May 6 06:23:47 2013] Got source and background scale factors 1337840.000000, 7078353.000000 [Mon May 6 06:23:47 2013] User source parameters: Position = (254.7, 360.0) = 17 45 50.47 -28 54 31.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 358.0 +/- 51.0 Background aperture counts = 2141.0 Rate = 0.009 +/- 0.001 [Mon May 6 06:23:47 2013] Updating counts from extracted products [Mon May 6 06:23:47 2013] Set source signif. to 357.96/46.27 = 7.74 [Mon May 6 06:23:59 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 06:23:59 2013] Using photon index=1.80, rate=0.00862, arf fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src21.arf [Mon May 6 06:23:59 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 06:23:59 2013] Updating source flux to 7.2e-14 [Mon May 6 06:25:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 06:25:18 2013] xmm0604301001/analysis//spectral/fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete