[Sun May  5 11:27:59 2013] Detection parameters:
  Position = (308.7, 265.6) = 17 45 32.57 -29 1 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2078.7 +/- 418.1
  Background counts = 416.1
  Rate = 0.04 +/- 0.009

[Sun May  5 11:28:00 2013] Off-axis axis estimate = 2.49'
[Sun May  5 11:32:51 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun May  5 11:32:51 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Sun May  5 11:32:51 2013] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.121
[Sun May  5 11:32:51 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.68"
[Sun May  5 14:25:02 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src2.ximg exists
[Sun May  5 14:25:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src2.csv
[Sun May  5 14:25:02 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May  5 14:25:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src2.csv
[Sun May  5 14:25:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May  5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May  5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May  5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May  5 14:25:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:45:05 2013] Spatial fit model total counts = 5313.210000, observed total counts = 3330.000000
[Sun May  5 17:45:05 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 17:45:05 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:45:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:45:05 2013] Assessing source extent using major
[Sun May  5 17:45:05 2013] Source does appear to be extended
[Sun May  5 17:45:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 17:45:42 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun May  5 17:45:42 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Sun May  5 17:45:42 2013] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.121
[Sun May  5 17:45:42 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.68"
[Sun May  5 19:48:34 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src2.ximg exists
[Sun May  5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src2.csv
[Sun May  5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May  5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src2.csv
[Sun May  5 19:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May  5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May  5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  5 19:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 23:05:07 2013] Spatial fit model total counts = 5347.960000, observed total counts = 3330.000000
[Sun May  5 23:05:07 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 23:05:07 2013] Vigneting correction estimate = 1.000000
[Sun May  5 23:05:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 23:05:07 2013] Assessing source extent using major
[Sun May  5 23:05:07 2013] Source does appear to be extended
[Sun May  5 23:05:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 23:05:34 2013] Counts = 2078.738037, rescaling region sizes by 2.000000
[Sun May  5 23:05:34 2013] XMMSAS src. selection expression = ellipse(26806.685913, 23058.735046, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May  5 23:05:34 2013] Writing source region out to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src2_src.reg
[Sun May  5 23:05:34 2013] Extracting stamp from image fullrun_pn_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (234, 191) - (384, 341)
[Sun May  5 23:05:34 2013] XMMSAS bgd. selection expression = annulus(26806.685913, 23058.735046, 4350.000000, 8700.000000, X, Y) && !ellipse(24927.477540, 24166.608200, 3324.288096, 2643.576076, 37.949400, X, Y) && !ellipse(24595.414000, 24216.674000, 1184.568034, 943.104027, 30.589700, X, Y) && !ellipse(23892.382400, 24841.393800, 1181.560034, 716.420021, 65.763100, X, Y) && !ellipse(27052.092926, 25158.571167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22108.243851, 31272.153137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17727.481000, 29541.622600, 1629.152047, 376.893611, 99.300090, X, Y) && !ellipse(18929.580400, 29698.501400, 1348.488039, 461.188813, 313.983000, X, Y) && !ellipse(22300.540985, 29107.651123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21055.232681, 28887.289001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25958.290500, 28736.313800, 316.729383, 316.729383, 0.000000, X, Y) && !ellipse(19282.886459, 28493.800385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21913.042000, 28629.546000, 483.108014, 483.108014, 0.000000, X, Y) && !ellipse(31239.906000, 26698.732000, 1406.736040, 1406.736040, 0.000000, X, Y) && !ellipse(28023.666382, 26845.263489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24798.832000, 27135.548000, 1148.584033, 1148.584033, 0.000000, X, Y) && !ellipse(23516.140020, 26502.432600, 452.892813, 452.892813, 0.000000, X, Y) && !ellipse(31308.326600, 26358.775400, 1390.456040, 658.568819, 112.113600, X, Y) && !ellipse(27583.884674, 26221.607727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.916000, 26294.104000, 2297.168066, 1609.784046, 7.028590, X, Y) && !ellipse(25109.800934, 25864.129272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.057556, 26044.936768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27280.518372, 25806.751434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27888.312988, 25272.888763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26455.550323, 25356.753174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.743347, 24833.109711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17720.661911, 24888.281219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.997345, 24055.103821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26069.278076, 22926.384491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.726013, 22836.623260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24800.872345, 22663.573761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.022797, 22332.741180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25677.962000, 22772.654000, 1269.080037, 1269.080037, 0.000000, X, Y) && !ellipse(24438.405090, 21999.091614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.555573, 21192.672928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22930.038000, 20893.153200, 1415.808041, 498.327214, 27.882000, X, Y) && !ellipse(23218.960754, 20770.808685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19851.585400, 21082.898200, 1544.728044, 849.392024, 234.217000, X, Y) && !ellipse(21741.928131, 20469.903595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21555.068497, 19891.063400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24825.949097, 19361.374435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22354.002655, 18757.422974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23895.477800, 18786.162800, 392.925611, 392.925611, 0.000000, X, Y) && !ellipse(26797.547000, 17665.288400, 505.801615, 505.801615, 0.000000, X, Y) && !ellipse(30857.533142, 16927.228973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32752.252319, 16563.158081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27486.915039, 16197.603027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19968.335380, 15821.992400, 505.261615, 314.463209, 22.913847, X, Y) && !ellipse(21751.909714, 15410.069565, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 23:05:34 2013] Writing fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src2.gif
[Sun May  5 23:15:52 2013] Mean detx,y = (-1415.35, -1289.66) 
[Sun May  5 23:16:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 23:17:49 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 23:17:49 2013] Setting source spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May  5 23:17:49 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May  6 00:26:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  6 00:26:50 2013] rmf not generated due to insufficient counts
[Mon May  6 06:23:44 2013] Updating aperture counts using extracted products
[Mon May  6 06:23:44 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 9696.00
[Mon May  6 06:23:44 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src2_bgd.pi.gz = 134523.00
[Mon May  6 06:23:44 2013] Got source and background scale factors 3637672.000000, 121014672.000000
[Mon May  6 06:23:44 2013] User source parameters:
  Position = (308.7, 265.6) = 17 45 32.57 -29 1 1.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 5652.3 +/- 99.5
  Background aperture counts = 4043.7
  Rate = 0.1 +/- 0.002

[Mon May  6 06:23:44 2013] Updating counts from extracted products
[Mon May  6 06:23:44 2013] Set source signif. to 5652.27/63.59 = 88.89
[Mon May  6 06:23:59 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 06:23:59 2013] Using photon index=1.80, rate=0.136, arf fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src2.arf
[Mon May  6 06:23:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 06:23:59 2013] Updating source flux to 1.2e-12
[Mon May  6 06:25:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May  6 06:25:18 2013] xmm0604301001/analysis//spectral/fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete