[Sun May 5 11:27:59 2013] Detection parameters: Position = (158.4, 390.8) = 17 46 22.33 -28 52 16.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 521.9 +/- 37.5 Background counts = 282.5 Rate = 0.01 +/- 0.0008 [Sun May 5 11:28:00 2013] Off-axis axis estimate = 12.16' [Sun May 5 11:32:51 2013] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting [Sun May 5 11:32:51 2013] Initial guess for spatial extent in simple fitting = 12.51" [Sun May 5 11:32:51 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.075 [Sun May 5 11:32:51 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 12.51" [Sun May 5 14:25:02 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src10.ximg exists [Sun May 5 14:25:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src10.csv [Sun May 5 14:25:02 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src10_1.ximg exists [Sun May 5 14:25:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src10.csv [Sun May 5 14:25:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Sun May 5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src10.csv [Sun May 5 14:25:03 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Sun May 5 14:25:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src10.csv [Sun May 5 14:25:03 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 17:45:05 2013] Warning, spatial fit 10 centroid is now closest to src. 15 [Sun May 5 17:45:05 2013] Source 11 is offset by 0.534128 and -2.417561 pixels which is larger than 2 X fitted extent = 1.407770 x 1.407770, not incorporating fit results [Sun May 5 17:45:05 2013] Vigneting correction estimate = 1.000000 [Sun May 5 17:45:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 17:45:05 2013] Assessing source extent using major [Sun May 5 17:45:05 2013] Source does appear to be extended [Sun May 5 17:45:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 17:45:42 2013] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting [Sun May 5 17:45:42 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 5 17:45:42 2013] Initial guess for spatial extent in simple fitting = 12.51" [Sun May 5 17:45:42 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.075 [Sun May 5 17:45:42 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 12.51" [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src7.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src7.csv [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src7_1.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src7.csv [Sun May 5 19:48:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src7_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src7.csv [Sun May 5 19:48:35 2013] fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists [Sun May 5 19:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src7.csv [Sun May 5 19:48:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 23:05:07 2013] Spatial fit model total counts = 5612.730000, observed total counts = 5013.000000 [Sun May 5 23:05:07 2013] Poor agreement between spatial fit and data for source 11 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 5 23:05:07 2013] Source 11 is offset by 0.524956 and -2.360205 pixels which is larger than 2 X fitted extent = 1.407770 x 1.407770, not incorporating fit results [Sun May 5 23:05:07 2013] Vigneting correction estimate = 1.000000 [Sun May 5 23:05:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 23:05:07 2013] Assessing source extent using major [Sun May 5 23:05:07 2013] Source does appear to be extended [Sun May 5 23:05:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 23:05:34 2013] XMMSAS src. selection expression = ellipse(13736.323166, 33952.482208, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 23:05:34 2013] Writing source region out to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src11_src.reg [Sun May 5 23:05:34 2013] Extracting stamp from image fullrun_pn_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (121, 353) - (196, 428) [Sun May 5 23:05:34 2013] XMMSAS bgd. selection expression = annulus(13736.323166, 33952.482208, 1087.500000, 2175.000000, X, Y) && !ellipse(16690.124237, 32683.691498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13998.010818, 33196.491821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16696.056900, 32082.234436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12576.063416, 31953.261078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13961.475400, 31287.121600, 1915.768055, 1214.240035, 11.942400, X, Y) [Sun May 5 23:05:34 2013] Writing fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src11.gif [Sun May 5 23:30:37 2013] Mean detx,y = (10594.23, 10169.59) [Sun May 5 23:30:40 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 23:31:04 2013] Binned source spectrum to 10 counts/bin [Sun May 5 23:31:04 2013] Setting source spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Sun May 5 23:31:04 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src11_bgd.pi.gz [Mon May 6 00:34:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 00:34:34 2013] rmf not generated due to insufficient counts [Mon May 6 06:23:45 2013] Updating aperture counts using extracted products [Mon May 6 06:23:46 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 2316.00 [Mon May 6 06:23:46 2013] Total counts from fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src11_bgd.pi.gz = 5180.00 [Mon May 6 06:23:46 2013] Got source and background scale factors 1236998.000000, 3930375.000000 [Mon May 6 06:23:46 2013] User source parameters: Position = (158.4, 390.8) = 17 46 22.33 -28 52 16.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 685.7 +/- 49.1 Background aperture counts = 1630.3 Rate = 0.02 +/- 0.001 [Mon May 6 06:23:46 2013] Updating counts from extracted products [Mon May 6 06:23:46 2013] Set source signif. to 685.71/40.38 = 16.98 [Mon May 6 06:23:59 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 06:23:59 2013] Using photon index=1.80, rate=0.0165, arf fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src11.arf [Mon May 6 06:23:59 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 06:23:59 2013] Getting flux using calc_pl_flux failed [Mon May 6 06:25:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 06:25:18 2013] xmm0604301001/analysis//spectral/fullrun_pn_xmm0604301001_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete