[Sun May  5 11:28:49 2013] Detection parameters:
  Position = (253.2, 424.1) = 17 45 50.93 -28 49 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.9 +/- 17.0
  Background counts = 65.6
  Rate = 0.004 +/- 0.0007

[Sun May  5 11:28:50 2013] Off-axis axis estimate = 9.68'
[Sun May  5 15:58:38 2013] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sun May  5 15:58:38 2013] Initial guess for spatial extent in simple fitting = 11.27"
[Sun May  5 15:58:38 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Sun May  5 15:58:38 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 11.27"
[Sun May  5 17:44:45 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src28.ximg exists
[Sun May  5 17:44:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src28.csv
[Sun May  5 17:44:45 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun May  5 17:44:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src28.csv
[Sun May  5 17:44:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:44:46 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun May  5 17:44:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun May  5 17:44:46 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun May  5 17:44:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun May  5 17:44:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:45:27 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.885231 pixels away
[Sun May  5 17:45:27 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:45:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:45:27 2013] Assessing source extent using major
[Sun May  5 17:45:27 2013] Source does appear to be extended
[Sun May  5 17:45:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 21:18:01 2013] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sun May  5 21:18:01 2013] Initial guess for spatial extent in simple fitting = 11.27"
[Sun May  5 21:18:01 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Sun May  5 21:18:01 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 11.27"
[Sun May  5 23:04:56 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src27.ximg exists
[Sun May  5 23:04:56 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun May  5 23:04:56 2013] Fit fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src27 appears to have run properly
[Sun May  5 23:04:57 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun May  5 23:04:57 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun May  5 23:04:57 2013] Fit fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun May  5 23:05:20 2013] Spatial fit model total counts = 1302.410000, observed total counts = 1308.000000
[Sun May  5 23:05:20 2013] Offset between fit and detection position for source 9 = 9.580501 pixels
[Sun May  5 23:05:20 2013] 1352.037000 total counts/ 652.689000 bgd. counts: snr = 27.374121
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 9.580501 pixels
  Position = (246.7, 417.2) = 17 45 53.11 -28 50 22.6
  Extent = 22.5 (22.5-45.1)", rotation angle = 0
  Source counts = 699.3 +/- 36.8
  Background counts = 652.7
  Rate = 0.01 +/- 0.0008
[Sun May  5 23:05:20 2013] Vigneting correction estimate = 1.000000
[Sun May  5 23:05:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 23:05:20 2013] Assessing source extent using major axis lower bound
[Sun May  5 23:05:20 2013] Source does appear to be extended
[Sun May  5 23:05:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 04:11:23 2013] XMMSAS src. selection expression = ellipse(21410.464000, 36246.716000, 1352.514039, 1352.514039, 0.000000, X, Y)
[Mon May  6 04:11:23 2013] Writing source region out to fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src9_src.reg
[Mon May  6 04:11:23 2013] Extracting stamp from image fullrun_mos2_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (169, 339) - (324, 495)
[Mon May  6 04:11:23 2013] XMMSAS bgd. selection expression = annulus(21410.464000, 36246.716000, 2254.190065, 4508.380130, X, Y) && !ellipse(22219.484200, 37540.881800, 658.279219, 470.092814, 359.386948, X, Y) && !ellipse(21916.500600, 33134.842000, 1565.528045, 564.612816, 117.383900, X, Y) && !ellipse(16684.220779, 32206.588043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22133.656464, 33493.289581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22108.211990, 31326.137848, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  6 04:11:23 2013] Writing fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src9.gif
[Mon May  6 04:26:53 2013] Mean detx,y = (-2727.87, -12212.73) 
[Mon May  6 04:26:54 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 04:27:30 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 04:27:31 2013] Setting source spectrum file to fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May  6 04:27:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon May  6 06:24:11 2013] Updating aperture counts using extracted products
[Mon May  6 06:24:11 2013] Total counts from fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 2566.00
[Mon May  6 06:24:11 2013] Total counts from fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src9_bgd.pi.gz = 16069.00
[Mon May  6 06:24:11 2013] Got source and background scale factors 5755980.000000, 42424307.000000
[Mon May  6 06:24:11 2013] User source parameters:
  Position = (246.7, 417.2) = 17 45 53.11 -28 50 22.6
  Extent = 22.5 (22.5-45.1)", rotation angle = 0
  Source aperture counts = 385.8 +/- 51.7
  Background aperture counts = 2180.2
  Rate = 0.008 +/- 0.001

[Mon May  6 06:24:15 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 06:24:15 2013] Using photon index=1.80, rate=0.0147, arf fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src9.arf
[Mon May  6 06:24:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 06:24:15 2013] Updating source flux to 4.3e-13
[Mon May  6 06:25:01 2013] xmm0604301001/analysis//spectral/fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete