[Sun May  5 11:28:50 2013] Detection parameters:
  Position = (275.0, 216.5) = 17 45 43.75 -29 4 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.8 +/- 19.3
  Background counts = 92.5
  Rate = 0.004 +/- 0.0005

[Sun May  5 11:28:50 2013] Off-axis axis estimate = 6.18'
[Sun May  5 15:58:38 2013] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Sun May  5 15:58:38 2013] Initial guess for spatial extent in simple fitting = 9.52"
[Sun May  5 15:58:38 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.038
[Sun May  5 15:58:38 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.52"
[Sun May  5 17:44:45 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src20.ximg exists
[Sun May  5 17:44:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src20.csv
[Sun May  5 17:44:45 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun May  5 17:44:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src20.csv
[Sun May  5 17:44:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:44:46 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun May  5 17:44:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun May  5 17:44:46 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun May  5 17:44:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun May  5 17:44:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:45:27 2013] Warning, spatial fit 20 centroid is now closest to src. 59
[Sun May  5 17:45:27 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:45:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:45:27 2013] Assessing source extent using major
[Sun May  5 17:45:27 2013] Source does appear to be extended
[Sun May  5 17:45:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 21:18:01 2013] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Sun May  5 21:18:01 2013] Initial guess for spatial extent in simple fitting = 9.52"
[Sun May  5 21:18:01 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.038
[Sun May  5 21:18:01 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.52"
[Sun May  5 23:04:56 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src20.ximg exists
[Sun May  5 23:04:56 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun May  5 23:04:56 2013] Fit fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun May  5 23:04:56 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun May  5 23:04:56 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun May  5 23:04:56 2013] Fit fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun May  5 23:05:20 2013] Spatial fit model total counts = 1042.400000, observed total counts = 1000.000000
[Sun May  5 23:05:20 2013] Offset between fit and detection position for source 60 = 0.307761 pixels
[Sun May  5 23:05:20 2013] 1041.767300 total counts/ 960.691000 bgd. counts: snr = 2.615785
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.307761 pixels
  Position = (275.0, 216.8) = 17 45 43.75 -29 4 54.3
  Extent = 3.9 (3.1-5.1)", rotation angle = 0
  Source counts = 81.1 +/- 32.3
  Background counts = 960.7
  Rate = 0.002 +/- 0.0007
[Sun May  5 23:05:20 2013] Vigneting correction estimate = 1.000000
[Sun May  5 23:05:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 23:05:20 2013] Assessing source extent using major axis lower bound
[Sun May  5 23:05:20 2013] Source does appear to be extended
[Sun May  5 23:05:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 04:11:23 2013] XMMSAS src. selection expression = ellipse(23875.935690, 18812.756740, 233.233207, 233.233207, 0.000000, X, Y)
[Mon May  6 04:11:23 2013] Writing source region out to fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src60_src.reg
[Mon May  6 04:11:23 2013] Extracting stamp from image fullrun_mos2_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (262, 203) - (288, 230)
[Mon May  6 04:11:23 2013] XMMSAS bgd. selection expression = annulus(23875.935690, 18812.756740, 388.722011, 777.444022, X, Y) && !ellipse(24762.114227, 19333.572296, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  6 04:11:23 2013] Writing fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src60.gif
[Mon May  6 04:24:31 2013] Mean detx,y = (-1204.85, 5364.84) 
[Mon May  6 04:24:33 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 04:24:40 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 04:24:40 2013] Setting source spectrum file to fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon May  6 04:24:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon May  6 05:13:02 2013] Not generating rmf since there are only 81 counts
[Mon May  6 05:13:02 2013] rmf not generated due to insufficient counts
[Mon May  6 06:24:10 2013] Updating aperture counts using extracted products
[Mon May  6 06:24:10 2013] Total counts from fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 168.00
[Mon May  6 06:24:10 2013] Total counts from fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src60_bgd.pi.gz = 492.00
[Mon May  6 06:24:10 2013] Got source and background scale factors 169600.000000, 962636.000000
[Mon May  6 06:24:10 2013] User source parameters:
  Position = (275.0, 216.8) = 17 45 43.75 -29 4 54.3
  Extent = 3.9 (3.1-5.1)", rotation angle = 0
  Source aperture counts = 81.3 +/- 14.0
  Background aperture counts = 86.7
  Rate = 0.002 +/- 0.0003

[Mon May  6 06:24:15 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 06:24:15 2013] Using photon index=1.80, rate=0.0017, arf fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src60.arf
[Mon May  6 06:24:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 06:24:15 2013] Updating source flux to 6.2e-14
[Mon May  6 06:24:37 2013] Source 60 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May  6 06:25:01 2013] xmm0604301001/analysis//spectral/fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete