[Sun May  5 11:28:49 2013] Detection parameters:
  Position = (275.0, 282.0) = 17 45 43.73 -29 0 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2040.0 +/- 60.5
  Background counts = 200.7
  Rate = 0.05 +/- 0.001

[Sun May  5 11:28:50 2013] Off-axis axis estimate = 2.07'
[Sun May  5 15:58:38 2013] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sun May  5 15:58:38 2013] Initial guess for spatial extent in simple fitting = 7.47"
[Sun May  5 15:58:38 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Sun May  5 15:58:38 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.47"
[Sun May  5 17:44:45 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src2.ximg exists
[Sun May  5 17:44:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src2.csv
[Sun May  5 17:44:45 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May  5 17:44:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src2.csv
[Sun May  5 17:44:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:44:46 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May  5 17:44:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May  5 17:44:46 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May  5 17:44:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May  5 17:44:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:45:27 2013] Spatial fit model total counts = 10321.400000, observed total counts = 8985.000000
[Sun May  5 17:45:27 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 17:45:27 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:45:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:45:27 2013] Assessing source extent using major
[Sun May  5 17:45:27 2013] Source does appear to be extended
[Sun May  5 17:45:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 21:18:01 2013] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sun May  5 21:18:01 2013] Initial guess for spatial extent in simple fitting = 7.47"
[Sun May  5 21:18:01 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Sun May  5 21:18:01 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.47"
[Sun May  5 23:04:56 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src2.ximg exists
[Sun May  5 23:04:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src2.csv
[Sun May  5 23:04:56 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May  5 23:04:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src2.csv
[Sun May  5 23:04:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 23:04:56 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May  5 23:04:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  5 23:04:56 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May  5 23:04:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  5 23:04:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 23:05:20 2013] Spatial fit model total counts = 10320.900000, observed total counts = 8985.000000
[Sun May  5 23:05:20 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 23:05:20 2013] Vigneting correction estimate = 1.000000
[Sun May  5 23:05:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 23:05:20 2013] Assessing source extent using major
[Sun May  5 23:05:20 2013] Source does appear to be extended
[Sun May  5 23:05:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 04:11:22 2013] Counts = 2039.950195, rescaling region sizes by 2.000000
[Mon May  6 04:11:22 2013] XMMSAS src. selection expression = ellipse(23878.924042, 24485.906219, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May  6 04:11:22 2013] Writing source region out to fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src2_src.reg
[Mon May  6 04:11:22 2013] Extracting stamp from image fullrun_mos2_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (200, 207) - (350, 357)
[Mon May  6 04:11:23 2013] XMMSAS bgd. selection expression = annulus(23878.924042, 24485.906219, 4350.000000, 8700.000000, X, Y) && !ellipse(24936.998352, 24215.464935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27549.889679, 16229.598785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23524.360809, 26481.460754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24392.449188, 25991.674225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25955.811200, 28730.289000, 411.109612, 411.109612, 0.000000, X, Y) && !ellipse(24762.114227, 19333.572296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20006.794800, 15810.571442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24092.481323, 23187.334045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26706.761230, 23548.526886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17710.660040, 24863.963200, 648.018419, 439.948013, 100.105017, X, Y) && !ellipse(14560.727020, 22032.506485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.000000, 26850.817810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25370.112400, 22490.297800, 805.864023, 805.864023, 0.000000, X, Y) && !ellipse(26433.978000, 25229.414000, 2183.120063, 2183.120063, 0.000000, X, Y) && !ellipse(21916.500600, 33134.842000, 1565.528045, 564.612816, 117.383900, X, Y) && !ellipse(13749.580000, 33217.502000, 1984.560057, 902.504026, 138.008800, X, Y) && !ellipse(26783.101200, 25794.033400, 1096.168032, 449.336013, 354.571080, X, Y) && !ellipse(23875.935690, 18812.756740, 310.977609, 310.977609, 0.000000, X, Y) && !ellipse(16684.220779, 32206.588043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21032.943400, 29049.074000, 1414.392041, 456.840813, 119.620800, X, Y) && !ellipse(22133.656464, 33493.289581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26780.661316, 24151.569000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27045.390000, 25796.172000, 1148.448033, 1148.448033, 0.000000, X, Y) && !ellipse(24996.317017, 22505.368530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27833.294000, 25191.278000, 1127.592032, 1127.592032, 0.000000, X, Y) && !ellipse(13485.228000, 33006.864000, 3145.496091, 895.376026, 135.305400, X, Y) && !ellipse(21262.198000, 28935.646000, 1417.296041, 1417.296041, 0.000000, X, Y) && !ellipse(21733.005905, 15401.282745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19636.894800, 21324.405400, 690.137620, 690.137620, 0.000000, X, Y) && !ellipse(19034.236400, 14650.438800, 1649.064047, 237.276007, 337.675400, X, Y) && !ellipse(15616.052000, 26675.967000, 2475.496071, 620.944818, 108.870098, X, Y) && !ellipse(22108.211990, 31326.137848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28041.546000, 26827.098000, 572.698416, 572.698416, 0.000000, X, Y) && !ellipse(22093.014000, 21476.148000, 1702.896049, 1702.896049, 0.000000, X, Y) && !ellipse(15995.409271, 21917.732224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19971.315000, 20914.224000, 2130.656061, 1340.168039, 232.318000, X, Y) && !ellipse(28807.373400, 26384.171700, 1406.688040, 422.844012, 24.760800, X, Y) && !ellipse(21756.448000, 22037.136000, 1412.240041, 1412.240041, 0.000000, X, Y) && !ellipse(27259.888000, 23663.340000, 1144.768033, 353.092010, 352.521350, X, Y) && !ellipse(26664.280762, 26477.210052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28640.228000, 25592.306000, 1193.008034, 1193.008034, 0.000000, X, Y) && !ellipse(28371.920000, 25378.820800, 1158.336033, 1158.336033, 0.000000, X, Y) && !ellipse(21474.224182, 16182.757431, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  6 04:11:23 2013] Writing fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src2.gif
[Mon May  6 04:14:30 2013] Mean detx,y = (-683.48, -281.44) 
[Mon May  6 04:14:32 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 04:17:26 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 04:17:26 2013] Setting source spectrum file to fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May  6 04:17:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May  6 04:39:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  6 04:39:52 2013] rmf not generated due to insufficient counts
[Mon May  6 06:24:07 2013] Updating aperture counts using extracted products
[Mon May  6 06:24:07 2013] Total counts from fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 20598.00
[Mon May  6 06:24:07 2013] Total counts from fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src2_bgd.pi.gz = 65292.00
[Mon May  6 06:24:07 2013] Got source and background scale factors 4966252.000000, 133179436.000000
[Mon May  6 06:24:07 2013] User source parameters:
  Position = (275.0, 282.0) = 17 45 43.73 -29 0 10.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 18163.3 +/- 144.5
  Background aperture counts = 2434.7
  Rate = 0.4 +/- 0.003

[Mon May  6 06:24:07 2013] Updating counts from extracted products
[Mon May  6 06:24:07 2013] Set source signif. to 18163.27/49.34 = 368.10
[Mon May  6 06:24:15 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 06:24:15 2013] Using photon index=1.80, rate=0.381, arf fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src2.arf
[Mon May  6 06:24:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 06:24:15 2013] Updating source flux to 6e-12
[Mon May  6 06:24:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May  6 06:25:01 2013] xmm0604301001/analysis//spectral/fullrun_mos2_xmm0604301001_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete