[Sun May  5 11:28:49 2013] Detection parameters:
  Position = (424.2, 397.5) = 17 44 54.31 -28 51 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.3 +/- 12.3
  Background counts = 22.9
  Rate = 0.001 +/- 0.0003

[Sun May  5 11:28:50 2013] Off-axis axis estimate = 11.61'
[Sun May  5 15:58:38 2013] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Sun May  5 15:58:38 2013] Initial guess for spatial extent in simple fitting = 12.23"
[Sun May  5 15:58:38 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.117
[Sun May  5 15:58:38 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 12.23"
[Sun May  5 17:44:46 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src61.ximg exists
[Sun May  5 17:44:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src61.csv
[Sun May  5 17:44:46 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src61_1.ximg exists
[Sun May  5 17:44:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src61.csv
[Sun May  5 17:44:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:44:47 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sun May  5 17:44:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sun May  5 17:44:47 2013] fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sun May  5 17:44:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sun May  5 17:44:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:45:27 2013] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.644807 pixels away
[Sun May  5 17:45:27 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:45:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:45:27 2013] Assessing source extent using major
[Sun May  5 17:45:27 2013] Source does appear to be extended
[Sun May  5 17:45:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 17:45:27 2013] Deleting source due to low Poisson probability 0.9