[Sun May  5 11:28:25 2013] Detection parameters:
  Position = (273.8, 88.8) = 17 45 44.15 -29 14 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.7 +/- 13.4
  Background counts = 40.2
  Rate = 0.001 +/- 0.0003

[Sun May  5 11:28:25 2013] Off-axis axis estimate = 15.30'
[Sun May  5 14:25:05 2013] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Sun May  5 14:25:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 14:25:05 2013] Initial guess for spatial extent in simple fitting = 14.08"
[Sun May  5 14:25:05 2013] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.146
[Sun May  5 14:25:05 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 14.08"
[Sun May  5 15:58:37 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src54.ximg exists
[Sun May  5 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src54.csv
[Sun May  5 15:58:37 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src54_1.ximg exists
[Sun May  5 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src54.csv
[Sun May  5 15:58:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:58:38 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sun May  5 15:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sun May  5 15:58:38 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sun May  5 15:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sun May  5 15:58:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:45:16 2013] Warning, spatial fit 54 centroid is now closest to src. 10
[Sun May  5 17:45:16 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:45:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:45:16 2013] Assessing source extent using major
[Sun May  5 17:45:16 2013] Source does appear to be extended
[Sun May  5 17:45:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 17:45:16 2013] Deleting source due to low Poisson probability 0.9