[Sun May  5 11:28:24 2013] Detection parameters:
  Position = (286.0, 223.0) = 17 45 40.11 -29 4 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.2 +/- 23.3
  Background counts = 99.6
  Rate = 0.006 +/- 0.0006

[Sun May  5 11:28:25 2013] Off-axis axis estimate = 5.54'
[Sun May  5 14:25:05 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Sun May  5 14:25:05 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Sun May  5 14:25:05 2013] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.316
[Sun May  5 14:25:05 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 9.20"
[Sun May  5 15:58:37 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src6.ximg exists
[Sun May  5 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src6.csv
[Sun May  5 15:58:37 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun May  5 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src6.csv
[Sun May  5 15:58:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:58:38 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun May  5 15:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May  5 15:58:38 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun May  5 15:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May  5 15:58:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:45:16 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.236965 pixels away
[Sun May  5 17:45:16 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:45:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:45:16 2013] Assessing source extent using major
[Sun May  5 17:45:16 2013] Source does appear to be extended
[Sun May  5 17:45:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 19:48:36 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Sun May  5 19:48:36 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Sun May  5 19:48:36 2013] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.316
[Sun May  5 19:48:36 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 9.20"
[Sun May  5 21:18:00 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass1_src6.ximg exists
[Sun May  5 21:18:00 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun May  5 21:18:00 2013] Fit fullrun_mos1_xmm0604301001_pi300-10000_cl_pass1_src6 appears to have run properly
[Sun May  5 21:18:01 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun May  5 21:18:01 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun May  5 21:18:01 2013] Fit fullrun_mos1_xmm0604301001_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun May  5 23:05:12 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 46.162104 pixels away
[Sun May  5 23:05:12 2013] Spatial fit model total counts = 1093.100000, observed total counts = 1092.000000
[Sun May  5 23:05:12 2013] Offset between fit and detection position for source 21 = 0.081398 pixels
[Sun May  5 23:05:12 2013] 1088.831000 total counts/ 908.895000 bgd. counts: snr = 5.968445
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.081398 pixels
  Position = (285.9, 223.1) = 17 45 40.12 -29 4 27.0
  Extent = 5.6 (4.5-6.8)", rotation angle = 0
  Source counts = 179.9 +/- 33.0
  Background counts = 908.9
  Rate = 0.004 +/- 0.0007
[Sun May  5 23:05:12 2013] Vigneting correction estimate = 1.000000
[Sun May  5 23:05:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 23:05:12 2013] Assessing source extent using major axis lower bound
[Sun May  5 23:05:12 2013] Source does appear to be extended
[Sun May  5 23:05:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 01:47:34 2013] XMMSAS src. selection expression = ellipse(24828.114620, 19360.298000, 333.037210, 333.037210, 0.000000, X, Y)
[Mon May  6 01:47:34 2013] Writing source region out to fullrun_mos1_xmm0604301001_pi300-10000_pass1_cl_src21_src.reg
[Mon May  6 01:47:34 2013] Extracting stamp from image fullrun_mos1_xmm0604301001_pi300-10000_cl_sm2.00.img.gz, (267, 204) - (305, 242)
[Mon May  6 01:47:34 2013] XMMSAS bgd. selection expression = annulus(24828.114620, 19360.298000, 555.062016, 1110.124032, X, Y) && !ellipse(22885.157000, 20854.836600, 1414.272041, 546.976816, 10.105700, X, Y)
[Mon May  6 01:47:34 2013] Writing fullrun_mos1_xmm0604301001_pi300-10000_pass1_cl_src21.gif
[Mon May  6 02:02:33 2013] Mean detx,y = (5073.88, 94.08) 
[Mon May  6 02:02:34 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 02:02:41 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 02:02:42 2013] Setting source spectrum file to fullrun_mos1_xmm0604301001_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon May  6 02:02:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604301001_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon May  6 06:24:01 2013] Updating aperture counts using extracted products
[Mon May  6 06:24:01 2013] Total counts from fullrun_mos1_xmm0604301001_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 344.00
[Mon May  6 06:24:01 2013] Total counts from fullrun_mos1_xmm0604301001_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1289.00
[Mon May  6 06:24:01 2013] Got source and background scale factors 352000.000000, 2750008.000000
[Mon May  6 06:24:01 2013] User source parameters:
  Position = (285.9, 223.1) = 17 45 40.12 -29 4 27.0
  Extent = 5.6 (4.5-6.8)", rotation angle = 0
  Source aperture counts = 179.0 +/- 19.6
  Background aperture counts = 165.0
  Rate = 0.004 +/- 0.0004

[Mon May  6 06:24:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 06:24:06 2013] Using photon index=1.80, rate=0.00377, arf fullrun_mos1_xmm0604301001_pi300-10000_pass1_cl_src21.arf
[Mon May  6 06:24:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 06:24:06 2013] Updating source flux to 8.9e-14
[Mon May  6 06:24:37 2013] xmm0604301001/analysis//spectral/fullrun_mos1_xmm0604301001_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete