[Sun May  5 11:28:24 2013] Detection parameters:
  Position = (111.7, 370.1) = 17 46 37.83 -28 53 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.3 +/- 15.5
  Background counts = 65.6
  Rate = 0.002 +/- 0.0003

[Sun May  5 11:28:25 2013] Off-axis axis estimate = 14.50'
[Sun May  5 14:25:05 2013] Using EEF radius (= 13.68 ")to estimate initial spatial extent for simple fitting
[Sun May  5 14:25:05 2013] Initial guess for spatial extent in simple fitting = 13.68"
[Sun May  5 14:25:05 2013] source mask rpix=3.1, npix_max = 53, mask sum = 36, frac = 0.677
[Sun May  5 14:25:05 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 13.68"
[Sun May  5 15:58:37 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src51.ximg exists
[Sun May  5 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src51.csv
[Sun May  5 15:58:37 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src51_1.ximg exists
[Sun May  5 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src51.csv
[Sun May  5 15:58:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:58:38 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sun May  5 15:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src51.csv
[Sun May  5 15:58:38 2013] fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sun May  5 15:58:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src51.csv
[Sun May  5 15:58:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604301001_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:45:16 2013] Source 12 is offset by 0.056208 and 9.165168 pixels which is larger than
2 X fitted extent = 6.343540 x 6.343540, not incorporating fit results
[Sun May  5 17:45:16 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:45:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:45:16 2013] Assessing source extent using major
[Sun May  5 17:45:16 2013] Source does appear to be extended
[Sun May  5 17:45:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 17:45:16 2013] Deleting source due to low Poisson probability 0.9