[Mon May 13 03:54:02 2013] Detection parameters:
  Position = (300.2, 264.1) = 17 45 35.54 -29 1 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.2 +/- 21.7
  Background counts = 250.8
  Rate = 0.008 +/- 0.001

[Mon May 13 03:54:02 2013] Off-axis axis estimate = 2.49'
[Mon May 13 03:58:43 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Mon May 13 03:58:43 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Mon May 13 03:58:43 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.780
[Mon May 13 03:58:43 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 7.67"
[Mon May 13 05:17:01 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src28.ximg exists
[Mon May 13 05:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src28.csv
[Mon May 13 05:17:01 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon May 13 05:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src28.csv
[Mon May 13 05:17:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 05:17:01 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon May 13 05:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon May 13 05:17:01 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon May 13 05:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon May 13 05:17:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 07:57:32 2013] Warning, spatial fit 28 centroid is now closest to src. 31
[Mon May 13 07:57:32 2013] Spatial fit model total counts = 2426.030000, observed total counts = 2429.000000
[Mon May 13 07:57:32 2013] Offset between fit and detection position for source 29 = 0.462530 pixels
[Mon May 13 07:57:32 2013] Warning, changing simple spatial fit ID from 28 to 29
[Mon May 13 07:57:32 2013] 2437.316200 total counts/ 2415.380000 bgd. counts: snr = 0.446343
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.462530 pixels
  Position = (300.4, 264.5) = 17 45 35.45 -29 1 26.7
  Extent = 2.2 (2.0-5.3)", rotation angle = 0
  Source counts = 21.9 +/- 49.4
  Background counts = 2415.4
  Rate = 0.001 +/- 0.002
  Deleting source due to low Poisson probability