[Mon May 13 03:54:02 2013] Detection parameters:
  Position = (306.8, 292.8) = 17 45 33.35 -28 59 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.4 +/- 28.3
  Background counts = 246.3
  Rate = 0.008 +/- 0.001

[Mon May 13 03:54:02 2013] Off-axis axis estimate = 0.73'
[Mon May 13 03:58:43 2013] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Mon May 13 03:58:43 2013] Initial guess for spatial extent in simple fitting = 6.79"
[Mon May 13 03:58:43 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.941
[Mon May 13 03:58:43 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 6.79"
[Mon May 13 05:17:00 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src26.ximg exists
[Mon May 13 05:17:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src26.csv
[Mon May 13 05:17:00 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon May 13 05:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src26.csv
[Mon May 13 05:17:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 05:17:01 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon May 13 05:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon May 13 05:17:01 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon May 13 05:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon May 13 05:17:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 07:57:32 2013] Spatial fit model total counts = 2999.960000, observed total counts = 2531.000000
[Mon May 13 07:57:32 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 07:57:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 07:57:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 07:57:32 2013] Assessing source extent using major
[Mon May 13 07:57:32 2013] Source does appear to be extended
[Mon May 13 07:57:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 07:57:58 2013] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Mon May 13 07:57:58 2013] Initial guess for spatial extent in simple fitting = 6.79"
[Mon May 13 07:57:58 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.941
[Mon May 13 07:57:58 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 6.79"
[Mon May 13 09:07:27 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_src21.ximg exists
[Mon May 13 09:07:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_src21.csv
[Mon May 13 09:07:27 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon May 13 09:07:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_src21.csv
[Mon May 13 09:07:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:07:28 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon May 13 09:07:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon May 13 09:07:28 2013] fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon May 13 09:07:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon May 13 09:07:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 10:50:54 2013] Spatial fit model total counts = 3006.390000, observed total counts = 2531.000000
[Mon May 13 10:50:54 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 10:50:54 2013] Vigneting correction estimate = 1.000000
[Mon May 13 10:50:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 10:50:54 2013] Assessing source extent using major
[Mon May 13 10:50:54 2013] Source does appear to be extended
[Mon May 13 10:50:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 10:51:20 2013] XMMSAS src. selection expression = ellipse(26640.900574, 25421.445618, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 10:51:20 2013] Writing source region out to fullrun_pn_xmm0604300901_pi300-10000_pass1_cl_src27_src.reg
[Mon May 13 10:51:20 2013] Extracting stamp from image fullrun_pn_xmm0604300901_pi300-10000_cl_sm2.00.img.gz, (269, 255) - (344, 330)
[Mon May 13 10:51:20 2013] XMMSAS bgd. selection expression = annulus(26640.900574, 25421.445618, 1087.500000, 2175.000000, X, Y) && !ellipse(24937.262500, 24153.583600, 977.528028, 765.852822, 48.901600, X, Y) && !ellipse(24548.306000, 24203.334000, 1189.080034, 1064.824031, 45.242800, X, Y) && !ellipse(23903.915800, 24755.394400, 1179.280034, 871.664025, 241.748000, X, Y) && !ellipse(23484.743800, 26383.173600, 1192.336034, 621.156018, 96.553540, X, Y) && !ellipse(24090.397125, 26208.892792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27660.238007, 26126.090393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25521.473846, 25693.129456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24563.069336, 22666.499603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25429.142548, 22751.410095, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 10:51:20 2013] Writing fullrun_pn_xmm0604300901_pi300-10000_pass1_cl_src27.gif
[Mon May 13 11:15:55 2013] Mean detx,y = (-1640.23, 913.40) 
[Mon May 13 11:15:58 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 11:16:25 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 11:16:25 2013] Setting source spectrum file to fullrun_pn_xmm0604300901_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon May 13 11:16:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604300901_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon May 13 11:49:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 11:49:55 2013] rmf not generated due to insufficient counts
[Mon May 13 13:54:12 2013] Updating aperture counts using extracted products
[Mon May 13 13:54:12 2013] Total counts from fullrun_pn_xmm0604300901_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 1799.00
[Mon May 13 13:54:12 2013] Total counts from fullrun_pn_xmm0604300901_pi300-10000_pass1_cl_src27_bgd.pi.gz = 7078.00
[Mon May 13 13:54:12 2013] Got source and background scale factors 1084628.000000, 5295019.000000
[Mon May 13 13:54:12 2013] User source parameters:
  Position = (306.8, 292.8) = 17 45 33.35 -28 59 23.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 349.1 +/- 43.4
  Background aperture counts = 1449.9
  Rate = 0.02 +/- 0.002

[Mon May 13 13:54:12 2013] Updating counts from extracted products
[Mon May 13 13:54:12 2013] Set source signif. to 349.15/38.08 = 9.17
[Mon May 13 13:54:16 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 13:54:16 2013] Using photon index=1.80, rate=0.0153, arf fullrun_pn_xmm0604300901_pi300-10000_pass1_cl_src27.arf
[Mon May 13 13:54:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 13:54:16 2013] Updating source flux to 1.1e-13
[Mon May 13 13:54:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 13:54:47 2013] xmm0604300901/analysis//spectral/fullrun_pn_xmm0604300901_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete