[Mon May 13 03:54:54 2013] Detection parameters:
  Position = (285.5, 260.3) = 17 45 40.42 -29 1 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.0 +/- 23.3
  Background counts = 214.8
  Rate = 0.003 +/- 0.0007

[Mon May 13 03:54:54 2013] Off-axis axis estimate = 2.92'
[Mon May 13 06:56:26 2013] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:56:26 2013] Initial guess for spatial extent in simple fitting = 7.89"
[Mon May 13 06:56:26 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.168
[Mon May 13 06:56:26 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 7.89"
[Mon May 13 07:57:22 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src22.ximg exists
[Mon May 13 07:57:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src22.csv
[Mon May 13 07:57:22 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon May 13 07:57:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src22.csv
[Mon May 13 07:57:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 07:57:23 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon May 13 07:57:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon May 13 07:57:23 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon May 13 07:57:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon May 13 07:57:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 07:57:43 2013] Source 26 is offset by 5.067126 and 5.968438 pixels which is larger than
2 X fitted extent = 1.256235 x 1.256235, not incorporating fit results
[Mon May 13 07:57:43 2013] Vigneting correction estimate = 1.000000
[Mon May 13 07:57:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 07:57:43 2013] Assessing source extent using major
[Mon May 13 07:57:43 2013] Source does appear to be extended
[Mon May 13 07:57:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 07:57:43 2013] Source is confused with source 27
[Mon May 13 10:16:00 2013] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Mon May 13 10:16:00 2013] Initial guess for spatial extent in simple fitting = 7.89"
[Mon May 13 10:16:00 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.168
[Mon May 13 10:16:00 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 7.89"
[Mon May 13 10:50:44 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src20.ximg exists
[Mon May 13 10:50:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src20.csv
[Mon May 13 10:50:44 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May 13 10:50:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src20.csv
[Mon May 13 10:50:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 10:50:44 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May 13 10:50:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 13 10:50:44 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May 13 10:50:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 13 10:50:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 10:51:06 2013] Source 26 is offset by -1.209368 and -6.351148 pixels which is larger than
2 X fitted extent = 0.917177 x 1.848915, not incorporating fit results
[Mon May 13 10:51:06 2013] Vigneting correction estimate = 1.000000
[Mon May 13 10:51:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 10:51:06 2013] Assessing source extent using major
[Mon May 13 10:51:06 2013] Source does appear to be extended
[Mon May 13 10:51:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 13:15:25 2013] XMMSAS src. selection expression = ellipse(24786.659973, 22601.284119, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 13:15:25 2013] Writing source region out to fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src26_src.reg
[Mon May 13 13:15:25 2013] Extracting stamp from image fullrun_mos2_xmm0604300901_pi300-10000_cl_sm2.00.img.gz, (248, 223) - (323, 298)
[Mon May 13 13:15:25 2013] XMMSAS bgd. selection expression = annulus(24786.659973, 22601.284119, 1087.500000, 2175.000000, X, Y) && !ellipse(24924.336517, 24151.823883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23854.229614, 24572.723022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.942000, 22485.173600, 949.104027, 949.104027, 0.000000, X, Y) && !ellipse(26649.075409, 24346.445496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25964.977905, 22969.600403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26057.570000, 25737.373400, 1056.136030, 1056.136030, 0.000000, X, Y) && !ellipse(25506.114000, 24549.114000, 1090.776031, 1090.776031, 0.000000, X, Y)
[Mon May 13 13:15:25 2013] Writing fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src26.gif
[Mon May 13 13:26:44 2013] Mean detx,y = (-14.57, 1575.14) 
[Mon May 13 13:26:46 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 13:26:53 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 13:26:53 2013] Setting source spectrum file to fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon May 13 13:26:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon May 13 13:44:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 13:44:35 2013] rmf not generated due to insufficient counts
[Mon May 13 13:54:24 2013] Updating aperture counts using extracted products
[Mon May 13 13:54:24 2013] Total counts from fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 977.00
[Mon May 13 13:54:24 2013] Total counts from fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src26_bgd.pi.gz = 2975.00
[Mon May 13 13:54:24 2013] Got source and background scale factors 1177544.000000, 6225820.000000
[Mon May 13 13:54:24 2013] User source parameters:
  Position = (285.5, 260.3) = 17 45 40.42 -29 1 46.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 414.3 +/- 32.3
  Background aperture counts = 562.7
  Rate = 0.02 +/- 0.001

[Mon May 13 13:54:24 2013] Updating counts from extracted products
[Mon May 13 13:54:24 2013] Set source signif. to 414.31/23.72 = 17.47
[Mon May 13 13:54:26 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 13:54:26 2013] Using photon index=1.80, rate=0.0154, arf fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src26.arf
[Mon May 13 13:54:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 13:54:26 2013] Updating source flux to 2.7e-13
[Mon May 13 13:54:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 13:54:41 2013] xmm0604300901/analysis//spectral/fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete