[Mon May 13 03:54:54 2013] Detection parameters:
  Position = (271.5, 299.9) = 17 45 45.04 -28 58 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 315.0 +/- 31.9
  Background counts = 223.4
  Rate = 0.009 +/- 0.0009

[Mon May 13 03:54:54 2013] Off-axis axis estimate = 1.95'
[Mon May 13 06:56:26 2013] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:56:26 2013] Initial guess for spatial extent in simple fitting = 7.41"
[Mon May 13 06:56:26 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.031
[Mon May 13 06:56:26 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.41"
[Mon May 13 07:57:22 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src6.ximg exists
[Mon May 13 07:57:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src6.csv
[Mon May 13 07:57:22 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon May 13 07:57:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src6.csv
[Mon May 13 07:57:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 07:57:23 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon May 13 07:57:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May 13 07:57:23 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May 13 07:57:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May 13 07:57:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 07:57:43 2013] Warning, spatial fit 6 centroid is now closest to src. 16
[Mon May 13 07:57:43 2013] Vigneting correction estimate = 1.000000
[Mon May 13 07:57:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 07:57:43 2013] Assessing source extent using major
[Mon May 13 07:57:43 2013] Source does appear to be extended
[Mon May 13 07:57:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 07:57:43 2013] Source is confused with source 14
[Mon May 13 10:16:00 2013] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Mon May 13 10:16:00 2013] Initial guess for spatial extent in simple fitting = 7.41"
[Mon May 13 10:16:00 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.031
[Mon May 13 10:16:00 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.41"
[Mon May 13 10:50:43 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src6.ximg exists
[Mon May 13 10:50:43 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon May 13 10:50:43 2013] Fit fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src6 appears to have run properly
[Mon May 13 10:50:44 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon May 13 10:50:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 13 10:50:44 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon May 13 10:50:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 13 10:50:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 10:51:06 2013] Source 17 is offset by 1.275182 and 5.749146 pixels which is larger than
2 X fitted extent = 6.809563 x 2.510938, not incorporating fit results
[Mon May 13 10:51:06 2013] Vigneting correction estimate = 1.000000
[Mon May 13 10:51:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 10:51:06 2013] Assessing source extent using major
[Mon May 13 10:51:06 2013] Source does appear to be extended
[Mon May 13 10:51:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 13:15:24 2013] XMMSAS src. selection expression = ellipse(23574.819641, 26046.245697, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 13:15:24 2013] Writing source region out to fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src17_src.reg
[Mon May 13 13:15:24 2013] Extracting stamp from image fullrun_mos2_xmm0604300901_pi300-10000_cl_sm2.00.img.gz, (234, 262) - (309, 337)
[Mon May 13 13:15:24 2013] XMMSAS bgd. selection expression = annulus(23574.819641, 26046.245697, 1087.500000, 2175.000000, X, Y) && !ellipse(24924.336517, 24151.823883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23854.229614, 24572.723022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23498.820200, 26340.686000, 1192.144034, 651.335219, 90.584000, X, Y) && !ellipse(24276.334137, 26120.174988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26057.570000, 25737.373400, 1056.136030, 1056.136030, 0.000000, X, Y) && !ellipse(25506.114000, 24549.114000, 1090.776031, 1090.776031, 0.000000, X, Y)
[Mon May 13 13:15:24 2013] Writing fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src17.gif
[Mon May 13 13:23:31 2013] Mean detx,y = (-1185.54, -1856.51) 
[Mon May 13 13:23:32 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 13:23:40 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 13:23:40 2013] Setting source spectrum file to fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May 13 13:23:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon May 13 13:38:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 13:38:04 2013] rmf not generated due to insufficient counts
[Mon May 13 13:54:22 2013] Updating aperture counts using extracted products
[Mon May 13 13:54:22 2013] Total counts from fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 1679.00
[Mon May 13 13:54:22 2013] Total counts from fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src17_bgd.pi.gz = 3732.00
[Mon May 13 13:54:22 2013] Got source and background scale factors 1256140.000000, 6565784.000000
[Mon May 13 13:54:22 2013] User source parameters:
  Position = (271.5, 299.9) = 17 45 45.04 -28 58 53.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 965.0 +/- 42.0
  Background aperture counts = 714.0
  Rate = 0.04 +/- 0.002

[Mon May 13 13:54:22 2013] Updating counts from extracted products
[Mon May 13 13:54:22 2013] Set source signif. to 965.01/26.72 = 36.11
[Mon May 13 13:54:26 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 13:54:26 2013] Using photon index=1.80, rate=0.0358, arf fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src17.arf
[Mon May 13 13:54:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 13:54:26 2013] Updating source flux to 5.9e-13
[Mon May 13 13:54:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 13:54:41 2013] xmm0604300901/analysis//spectral/fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete