[Mon May 13 03:54:53 2013] Detection parameters:
  Position = (287.0, 278.2) = 17 45 39.90 -29 0 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3283.8 +/- 75.1
  Background counts = 228.4
  Rate = 0.09 +/- 0.002

[Mon May 13 03:54:54 2013] Off-axis axis estimate = 1.69'
[Mon May 13 06:56:26 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:56:26 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Mon May 13 06:56:26 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Mon May 13 06:56:26 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Mon May 13 07:57:22 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 13 07:57:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src1.csv
[Mon May 13 07:57:22 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 13 07:57:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src1.csv
[Mon May 13 07:57:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 07:57:22 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 13 07:57:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 13 07:57:22 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 13 07:57:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 13 07:57:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300901_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 07:57:43 2013] Spatial fit model total counts = 6807.700000, observed total counts = 6134.000000
[Mon May 13 07:57:43 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 07:57:43 2013] Vigneting correction estimate = 1.000000
[Mon May 13 07:57:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 07:57:43 2013] Assessing source extent using major
[Mon May 13 07:57:43 2013] Source does appear to be extended
[Mon May 13 07:57:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 10:16:00 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon May 13 10:16:00 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Mon May 13 10:16:00 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Mon May 13 10:16:00 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Mon May 13 10:50:43 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 13 10:50:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src1.csv
[Mon May 13 10:50:43 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 13 10:50:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src1.csv
[Mon May 13 10:50:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 10:50:44 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 13 10:50:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 13 10:50:44 2013] fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 13 10:50:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 13 10:50:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 10:51:06 2013] Spatial fit model total counts = 6807.660000, observed total counts = 6134.000000
[Mon May 13 10:51:06 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 10:51:06 2013] Source 1 is offset by 6.190213 and 1.018527 pixels which is larger than
2 X fitted extent = 0.856736 x 0.856736, not incorporating fit results
[Mon May 13 10:51:06 2013] Vigneting correction estimate = 1.000000
[Mon May 13 10:51:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 10:51:06 2013] Assessing source extent using major
[Mon May 13 10:51:06 2013] Source does appear to be extended
[Mon May 13 10:51:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 10:51:06 2013] Source is confused with source 23
[Mon May 13 13:15:24 2013] Counts = 3283.848145, rescaling region sizes by 2.000000
[Mon May 13 13:15:24 2013] XMMSAS src. selection expression = ellipse(24924.336517, 24151.823883, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 13 13:15:24 2013] Writing source region out to fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src1_src.reg
[Mon May 13 13:15:24 2013] Extracting stamp from image fullrun_mos2_xmm0604300901_pi300-10000_cl_sm2.00.img.gz, (212, 203) - (362, 353)
[Mon May 13 13:15:24 2013] XMMSAS bgd. selection expression = annulus(24924.336517, 24151.823883, 4350.000000, 8700.000000, X, Y) && !ellipse(23854.229614, 24572.723022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27531.627100, 16203.274800, 539.551216, 341.880810, 15.506918, X, Y) && !ellipse(23498.820200, 26340.686000, 1192.144034, 651.335219, 90.584000, X, Y) && !ellipse(24276.334137, 26120.174988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23574.819641, 26046.245697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24768.921722, 19361.618698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21738.892200, 32874.500200, 372.361570, 372.361570, 0.000000, X, Y) && !ellipse(19958.225021, 15819.631729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25970.486780, 28713.937000, 291.616008, 291.616008, 0.000000, X, Y) && !ellipse(19648.801270, 21171.538895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.942000, 22485.173600, 949.104027, 949.104027, 0.000000, X, Y) && !ellipse(26649.075409, 24346.445496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25964.977905, 22969.600403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27191.235046, 25785.168701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24786.659973, 22601.284119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26057.570000, 25737.373400, 1056.136030, 1056.136030, 0.000000, X, Y) && !ellipse(25506.114000, 24549.114000, 1090.776031, 1090.776031, 0.000000, X, Y)
[Mon May 13 13:15:24 2013] Writing fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src1.gif
[Mon May 13 13:15:32 2013] Mean detx,y = (15.21, 18.19) 
[Mon May 13 13:15:34 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 13:18:43 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 13:18:44 2013] Setting source spectrum file to fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 13 13:18:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 13 13:28:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 13:28:59 2013] rmf not generated due to insufficient counts
[Mon May 13 13:54:21 2013] Updating aperture counts using extracted products
[Mon May 13 13:54:21 2013] Total counts from fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 11663.00
[Mon May 13 13:54:21 2013] Total counts from fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src1_bgd.pi.gz = 46720.00
[Mon May 13 13:54:21 2013] Got source and background scale factors 4982856.000000, 159423944.000000
[Mon May 13 13:54:21 2013] User source parameters:
  Position = (287.0, 278.2) = 17 45 39.90 -29 0 26.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 10202.7 +/- 109.0
  Background aperture counts = 1460.3
  Rate = 0.4 +/- 0.004

[Mon May 13 13:54:21 2013] Updating counts from extracted products
[Mon May 13 13:54:21 2013] Set source signif. to 10202.75/38.21 = 267.00
[Mon May 13 13:54:25 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 13:54:25 2013] Using photon index=1.80, rate=0.378, arf fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src1.arf
[Mon May 13 13:54:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 13:54:25 2013] Updating source flux to 6.3e-12
[Mon May 13 13:54:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 13:54:41 2013] xmm0604300901/analysis//spectral/fullrun_mos2_xmm0604300901_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete