[Sun May 5 22:56:12 2013] Detection parameters: Position = (286.7, 278.0) = 17 45 39.76 -29 0 26.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 7722.1 +/- 112.3 Background counts = 373.4 Rate = 0.2 +/- 0.004 [Sun May 5 22:56:15 2013] Off-axis axis estimate = 1.71' [Sun May 5 23:00:23 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Sun May 5 23:00:23 2013] Initial guess for spatial extent in simple fitting = 7.28" [Sun May 5 23:00:23 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846 [Sun May 5 23:00:23 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28" [Mon May 6 01:15:29 2013] fullrun_pn_xmm0604300801_pi300-10000_cl_pass0_src1.ximg exists [Mon May 6 01:15:29 2013] fullrun_pn_xmm0604300801_pi300-10000_cl_pass0_src1_1.ximg exists [Mon May 6 01:15:29 2013] Fit fullrun_pn_xmm0604300801_pi300-10000_cl_pass0_src1 appears to have run properly [Mon May 6 01:15:30 2013] fullrun_pn_xmm0604300801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Mon May 6 01:15:30 2013] fullrun_pn_xmm0604300801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Mon May 6 01:15:30 2013] Fit fullrun_pn_xmm0604300801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Mon May 6 05:38:33 2013] Spatial fit model total counts = 21010.600000, observed total counts = 21020.000000 [Mon May 6 05:38:33 2013] Offset between fit and detection position for source 1 = 0.462164 pixels [Mon May 6 05:38:33 2013] 20600.110000 total counts/ 12803.200000 bgd. counts: snr = 68.906986 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.462164 pixels Position = (286.3, 277.8) = 17 45 39.91 -29 0 27.2 Extent = 13.0 (12.2-13.9)" x 11.1 (10.6-11.7)", rotation angle = 29 (19-42) degrees Source counts = 7796.9 +/- 143.5 Background counts = 12803.2 Rate = 0.2 +/- 0.004 [Mon May 6 05:38:33 2013] Vigneting correction estimate = 1.000000 [Mon May 6 05:38:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 05:38:33 2013] Assessing source extent using major axis lower bound [Mon May 6 05:38:33 2013] Source does appear to be extended [Mon May 6 05:38:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04 [Mon May 6 05:39:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 6 05:39:09 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 6 05:39:09 2013] Initial guess for spatial extent in simple fitting = 12.09" [Mon May 6 05:39:09 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.977 [Mon May 6 05:39:09 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.09" [Mon May 6 07:53:40 2013] fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_src1.ximg exists [Mon May 6 07:53:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_src1.csv [Mon May 6 07:53:41 2013] fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_src1_1.ximg exists [Mon May 6 07:53:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_src1.csv [Mon May 6 07:53:41 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 07:53:41 2013] fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Mon May 6 07:53:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1.csv [Mon May 6 07:53:41 2013] fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Mon May 6 07:53:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1.csv [Mon May 6 07:53:41 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 10:55:57 2013] Warning, spatial fit 1 centroid is now closest to src. 53 [Mon May 6 10:55:57 2013] Vigneting correction estimate = 1.000000 [Mon May 6 10:55:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 10:55:57 2013] Assessing source extent using major axis lower bound [Mon May 6 10:55:57 2013] Source does appear to be extended [Mon May 6 10:55:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04 [Mon May 6 10:56:26 2013] Counts = 7796.910000, rescaling region sizes by 2.000000 [Mon May 6 10:56:26 2013] XMMSAS src. selection expression = ellipse(24859.331600, 24123.903600, 1564.752045, 1336.356038, 28.625000, X, Y) [Mon May 6 10:56:26 2013] Writing source region out to fullrun_pn_xmm0604300801_pi300-10000_pass1_cl_src1_src.reg [Mon May 6 10:56:26 2013] Extracting stamp from image fullrun_pn_xmm0604300801_pi300-10000_cl_sm2.00.img.gz, (196, 188) - (376, 368) [Mon May 6 10:56:26 2013] XMMSAS bgd. selection expression = annulus(24859.331600, 24123.903600, 5215.840150, 10431.680300, X, Y) && !ellipse(24042.335785, 24395.890106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23684.556000, 24780.392000, 1189.376034, 1189.376034, 0.000000, X, Y) && !ellipse(35420.144720, 34994.773400, 1164.445837, 1164.445837, 0.000000, X, Y) && !ellipse(32354.199707, 35034.088043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13644.623764, 33853.797424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22147.070880, 33473.507200, 526.192015, 319.514409, 314.810883, X, Y) && !ellipse(15919.227188, 32677.693787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13874.145737, 33110.877747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16850.077805, 32078.379333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22036.515579, 31266.699707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20695.153625, 30175.015381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18695.142600, 29809.953600, 891.904026, 891.904026, 0.000000, X, Y) && !ellipse(22292.652893, 28955.172791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31914.314453, 28987.811066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20961.996017, 28806.387604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25896.113880, 28715.417800, 389.697611, 389.697611, 0.000000, X, Y) && !ellipse(19287.881897, 28572.766266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17925.180200, 28632.472600, 1306.752038, 377.497611, 81.497700, X, Y) && !ellipse(21961.213638, 28499.527283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24567.262000, 26701.796000, 1148.272033, 1148.272033, 0.000000, X, Y) && !ellipse(23468.538000, 26469.950000, 353.796810, 353.796810, 0.000000, X, Y) && !ellipse(24143.232208, 26203.290680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.690582, 26193.132538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19373.972549, 26013.838409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23381.533508, 25789.971649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.520020, 25609.288940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27280.515717, 25470.651276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27950.923889, 25531.870941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26679.852509, 25436.956299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17632.167130, 24833.927460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.640686, 24489.469269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26724.754364, 23960.882141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26710.868561, 23018.689240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25674.926000, 22948.074000, 932.496027, 932.496027, 0.000000, X, Y) && !ellipse(24735.415253, 22734.444458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24061.409515, 22834.738190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26320.518188, 22239.116882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25239.774000, 22481.728000, 1841.152053, 1617.664047, 309.979000, X, Y) && !ellipse(24220.756409, 22054.463577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21817.891174, 21535.880600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22180.000000, 21173.315109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19686.182000, 21093.929200, 1509.848043, 858.344025, 50.529400, X, Y) && !ellipse(21791.496201, 20492.702332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20211.342380, 20265.804000, 1580.800045, 1580.800045, 0.000000, X, Y) && !ellipse(21518.417145, 19865.585739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24788.311401, 19341.917053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22339.593811, 18654.368011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23854.548218, 18724.377151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21664.194183, 15356.994202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26187.541000, 15250.622400, 905.376026, 367.185611, 29.741800, X, Y) && !ellipse(26756.428500, 17616.164600, 419.280012, 231.840807, 345.291720, X, Y) && !ellipse(30740.064026, 16831.639954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30804.225464, 16478.722839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23038.161224, 16262.768066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27438.811218, 16123.209106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19885.328537, 15787.381088, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 6 10:56:26 2013] Writing fullrun_pn_xmm0604300801_pi300-10000_pass1_cl_src1.gif [Mon May 6 10:57:02 2013] Mean detx,y = (266.06, -137.39) [Mon May 6 10:57:10 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 10:59:04 2013] Binned source spectrum to 10 counts/bin [Mon May 6 10:59:04 2013] Setting source spectrum file to fullrun_pn_xmm0604300801_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Mon May 6 10:59:04 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604300801_pi300-10000_pass1_cl_src1_bgd.pi.gz [Mon May 6 17:23:17 2013] Updating aperture counts using extracted products [Mon May 6 17:23:18 2013] Total counts from fullrun_pn_xmm0604300801_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 42828.00 [Mon May 6 17:23:18 2013] Total counts from fullrun_pn_xmm0604300801_pi300-10000_pass1_cl_src1_bgd.pi.gz = 137016.00 [Mon May 6 17:23:18 2013] Got source and background scale factors 5915769.000000, 186943078.000000 [Mon May 6 17:23:18 2013] User source parameters: Position = (286.3, 277.8) = 17 45 39.91 -29 0 27.2 Extent = 13.0 (12.2-13.9)" x 11.1 (10.6-11.7)", rotation angle = 29 (19-42) degrees Source aperture counts = 38492.2 +/- 208.0 Background aperture counts = 4335.8 Rate = 1 +/- 0.006 [Mon May 6 17:23:26 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 17:23:26 2013] Using photon index=1.80, rate=0.228, arf fullrun_pn_xmm0604300801_pi300-10000_pass1_cl_src1.arf [Mon May 6 17:23:26 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 17:23:26 2013] Updating source flux to 1.3e-12 [Mon May 6 17:24:03 2013] xmm0604300801/analysis//spectral/fullrun_pn_xmm0604300801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete