[Sun May 5 22:57:03 2013] Detection parameters: Position = (286.1, 278.0) = 17 45 39.96 -29 0 25.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 3553.4 +/- 73.6 Background counts = 160.8 Rate = 0.1 +/- 0.002 [Sun May 5 22:57:04 2013] Off-axis axis estimate = 1.73' [Mon May 6 03:23:16 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting [Mon May 6 03:23:16 2013] Initial guess for spatial extent in simple fitting = 7.29" [Mon May 6 03:23:16 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844 [Mon May 6 03:23:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29" [Mon May 6 05:38:14 2013] fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_src1.ximg exists [Mon May 6 05:38:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_src1.csv [Mon May 6 05:38:14 2013] fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_src1_1.ximg exists [Mon May 6 05:38:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_src1.csv [Mon May 6 05:38:14 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 05:38:15 2013] fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Mon May 6 05:38:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_tfrozen_src1.csv [Mon May 6 05:38:15 2013] fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Mon May 6 05:38:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_tfrozen_src1.csv [Mon May 6 05:38:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0604300801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 05:38:54 2013] Warning, spatial fit 1 centroid is now closest to src. 3 [Mon May 6 05:38:54 2013] Spatial fit model total counts = 6988.880000, observed total counts = 6981.000000 [Mon May 6 05:38:54 2013] Offset between fit and detection position for source 2 = 0.455019 pixels [Mon May 6 05:38:54 2013] Warning, changing simple spatial fit ID from 1 to 3 [Mon May 6 05:38:54 2013] 6985.740000 total counts/ 5330.260000 bgd. counts: snr = 22.675128 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.455019 pixels Position = (285.8, 277.7) = 17 45 40.06 -29 0 27.9 Extent = 10.3 (8.8-12.3)" x 6.5 (5.8-7.3)", rotation angle = 89 (81-99) degrees Source counts = 1655.5 +/- 83.6 Background counts = 5330.3 Rate = 0.04 +/- 0.002 [Mon May 6 05:38:54 2013] Spatial fit model total counts = 6945.560000, observed total counts = 7274.000000 [Mon May 6 05:38:54 2013] Offset between fit and detection position for source 2 = 0.316077 pixels [Mon May 6 05:38:54 2013] Warning, changing simple spatial fit ID from 3 to 4 [Mon May 6 05:38:54 2013] 6818.600000 total counts/ 4947.240000 bgd. counts: snr = 26.605771 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.316077 pixels Position = (285.9, 278.0) = 17 45 40.04 -29 0 26.6 Extent = 10.1 (9.3-11.1)" x 5.9 (5.5-6.4)", rotation angle = 85 (80-91) degrees Source counts = 1871.4 +/- 82.6 Background counts = 4947.2 Rate = 0.05 +/- 0.002 [Mon May 6 05:38:54 2013] Vigneting correction estimate = 1.000000 [Mon May 6 05:38:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 05:38:54 2013] Assessing source extent using major axis lower bound [Mon May 6 05:38:54 2013] Source does appear to be extended [Mon May 6 05:38:54 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.46 [Mon May 6 05:38:54 2013] Source is confused with source 3 [Mon May 6 05:38:54 2013] Source is confused with source 10 [Mon May 6 05:38:54 2013] Source is confused with source 9 [Mon May 6 09:12:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 6 09:12:12 2013] Initial guess for spatial extent in simple fitting = 7.98" [Mon May 6 09:12:12 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.734 [Mon May 6 09:12:12 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.98" [Mon May 6 10:55:43 2013] fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_src1.ximg exists [Mon May 6 10:55:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_src1.csv [Mon May 6 10:55:43 2013] fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_src1_1.ximg exists [Mon May 6 10:55:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_src1.csv [Mon May 6 10:55:43 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 10:55:43 2013] fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Mon May 6 10:55:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1.csv [Mon May 6 10:55:43 2013] fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Mon May 6 10:55:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1.csv [Mon May 6 10:55:43 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0604300801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 10:56:11 2013] Warning, spatial fit 1 centroid is now closest to src. 1 [Mon May 6 10:56:11 2013] Spatial fit model total counts = 6940.950000, observed total counts = 7274.000000 [Mon May 6 10:56:11 2013] Offset between fit and detection position for source 2 = 0.011387 pixels [Mon May 6 10:56:11 2013] Warning, changing simple spatial fit ID from 1 to 4 [Mon May 6 10:56:11 2013] 6815.300000 total counts/ 4934.750000 bgd. counts: snr = 26.770243 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.011387 pixels Position = (285.9, 278.0) = 17 45 40.04 -29 0 26.6 Extent = 10.1 (9.3-11.1)" x 5.9 (5.5-6.4)", rotation angle = 85 (80-91) degrees Source counts = 1880.5 +/- 82.6 Background counts = 4934.8 Rate = 0.05 +/- 0.002 [Mon May 6 10:56:12 2013] Vigneting correction estimate = 1.000000 [Mon May 6 10:56:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 10:56:12 2013] Assessing source extent using major axis lower bound [Mon May 6 10:56:12 2013] Source does appear to be extended [Mon May 6 10:56:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.45 [Mon May 6 16:02:10 2013] Counts = 1880.550000, rescaling region sizes by 2.000000 [Mon May 6 16:02:10 2013] XMMSAS src. selection expression = ellipse(24824.884000, 24136.137000, 1217.604035, 704.016020, 84.552150, X, Y) [Mon May 6 16:02:10 2013] Writing source region out to fullrun_mos2_xmm0604300801_pi300-10000_pass1_cl_src2_src.reg [Mon May 6 16:02:10 2013] Extracting stamp from image fullrun_mos2_xmm0604300801_pi300-10000_cl_sm2.00.img.gz, (216, 208) - (356, 348) [Mon May 6 16:02:10 2013] XMMSAS bgd. selection expression = annulus(24824.884000, 24136.137000, 4058.680117, 8117.360234, X, Y) && !ellipse(23808.233887, 24485.964630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24907.398000, 23538.658000, 1238.312036, 565.580016, 346.155500, X, Y) && !ellipse(25416.085114, 24217.695160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25083.444458, 24709.555267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27496.505005, 16154.144180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23427.847720, 26233.188000, 1687.232049, 692.016820, 94.175000, X, Y) && !ellipse(23427.787200, 26440.780000, 1148.088033, 588.937617, 93.787870, X, Y) && !ellipse(24279.262634, 26210.586700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24750.628571, 19293.465424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19858.382000, 15758.537000, 587.584817, 170.692005, 29.504572, X, Y) && !ellipse(24689.623962, 25695.752625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25882.267340, 28682.444000, 314.384009, 314.384009, 0.000000, X, Y) && !ellipse(26770.849600, 25625.887200, 1778.000051, 734.733621, 318.246000, X, Y) && !ellipse(20921.933380, 28855.481800, 732.660021, 336.657610, 317.194200, X, Y) && !ellipse(21887.720940, 28566.376200, 585.003217, 585.003217, 0.000000, X, Y) && !ellipse(17691.669600, 24825.509200, 409.636012, 409.636012, 0.000000, X, Y) && !ellipse(24564.803070, 22587.286804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21961.625168, 31264.381866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16610.858337, 32072.463928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25730.986000, 22382.836000, 1238.312036, 1238.312036, 0.000000, X, Y) && !ellipse(30739.222382, 16856.816269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27103.950000, 23775.552000, 1201.000035, 768.819222, 104.914029, X, Y) && !ellipse(22506.352000, 21081.520200, 1423.840041, 398.400011, 28.398500, X, Y) && !ellipse(22416.225922, 29428.349457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21309.564400, 29791.966000, 1406.688040, 1406.688040, 0.000000, X, Y) && !ellipse(21775.700200, 21550.413200, 1564.920045, 533.063215, 30.813800, X, Y) && !ellipse(27346.843658, 25788.368011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19496.893800, 21363.955960, 1251.904036, 456.523213, 39.812000, X, Y) && !ellipse(27003.373138, 24842.261597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19801.878000, 21376.038000, 1281.120037, 1281.120037, 0.000000, X, Y) && !ellipse(21747.454000, 28368.563000, 1370.552039, 1370.552039, 0.000000, X, Y) && !ellipse(20049.143400, 21120.751000, 1534.416044, 571.234416, 99.304680, X, Y) && !ellipse(20137.318000, 20175.732600, 1590.440046, 1590.440046, 0.000000, X, Y) && !ellipse(28029.202000, 26799.247600, 1195.040034, 317.944009, 324.608900, X, Y) && !ellipse(20250.012200, 20332.291800, 1556.048045, 403.027212, 316.114600, X, Y) [Mon May 6 16:02:10 2013] Writing fullrun_mos2_xmm0604300801_pi300-10000_pass1_cl_src2.gif [Mon May 6 16:02:17 2013] Mean detx,y = (19.97, 86.64) [Mon May 6 16:02:18 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 16:03:52 2013] Binned source spectrum to 10 counts/bin [Mon May 6 16:03:52 2013] Setting source spectrum file to fullrun_mos2_xmm0604300801_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Mon May 6 16:03:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604300801_pi300-10000_pass1_cl_src2_bgd.pi.gz [Mon May 6 17:23:30 2013] Updating aperture counts using extracted products [Mon May 6 17:23:30 2013] Total counts from fullrun_mos2_xmm0604300801_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 9294.00 [Mon May 6 17:23:30 2013] Total counts from fullrun_mos2_xmm0604300801_pi300-10000_pass1_cl_src2_bgd.pi.gz = 42154.00 [Mon May 6 17:23:30 2013] Got source and background scale factors 2337988.000000, 117413261.000000 [Mon May 6 17:23:30 2013] User source parameters: Position = (285.9, 278.0) = 17 45 40.04 -29 0 26.6 Extent = 10.1 (9.3-11.1)" x 5.9 (5.5-6.4)", rotation angle = 85 (80-91) degrees Source aperture counts = 8454.6 +/- 97.4 Background aperture counts = 839.4 Rate = 0.2 +/- 0.003 [Mon May 6 17:23:34 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 17:23:34 2013] Using photon index=1.80, rate=0.0505, arf fullrun_mos2_xmm0604300801_pi300-10000_pass1_cl_src2.arf [Mon May 6 17:23:34 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 17:23:34 2013] Updating source flux to 9.1e-13 [Mon May 6 17:23:46 2013] Flag c found in src. 2 procflags, skipping spectral fitting [Mon May 6 17:23:55 2013] xmm0604300801/analysis//spectral/fullrun_mos2_xmm0604300801_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete