[Mon Jun  3 03:44:52 2013] Detection parameters:
  Position = (217.9, 350.4) = 17 46 2.67 -28 55 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.7 +/- 34.6
  Background counts = 412.1
  Rate = 0.005 +/- 0.001

[Mon Jun  3 03:44:55 2013] Off-axis axis estimate = 6.95'
[Mon Jun  3 03:53:36 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 03:53:36 2013] Initial guess for spatial extent in simple fitting = 9.90"
[Mon Jun  3 03:53:36 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.973
[Mon Jun  3 03:53:36 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 9.90"
[Mon Jun  3 08:11:32 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src47.ximg exists
[Mon Jun  3 08:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src47.csv
[Mon Jun  3 08:11:32 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src47_1.ximg exists
[Mon Jun  3 08:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src47.csv
[Mon Jun  3 08:11:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 08:11:34 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Mon Jun  3 08:11:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src47.csv
[Mon Jun  3 08:11:34 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Mon Jun  3 08:11:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src47.csv
[Mon Jun  3 08:11:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:01:34 2013] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 10.286608 pixels away
[Mon Jun  3 16:01:34 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:01:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:01:34 2013] Assessing source extent using major
[Mon Jun  3 16:01:34 2013] Source does appear to be extended
[Mon Jun  3 16:01:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 16:02:46 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 16:02:46 2013] Initial guess for spatial extent in simple fitting = 9.90"
[Mon Jun  3 16:02:46 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.973
[Mon Jun  3 16:02:46 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 9.90"
[Mon Jun  3 19:23:07 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_src43.ximg exists
[Mon Jun  3 19:23:07 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_src43_1.ximg exists
[Mon Jun  3 19:23:07 2013] Fit fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_src43 appears to have run properly
[Mon Jun  3 19:23:09 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Mon Jun  3 19:23:09 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Mon Jun  3 19:23:09 2013] Fit fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Tue Jun  4 02:09:42 2013] Spatial fit model total counts = 3303.690000, observed total counts = 3251.000000
[Tue Jun  4 02:09:42 2013] Offset between fit and detection position for source 51 = 0.707410 pixels
[Tue Jun  4 02:09:42 2013] 3290.607000 total counts/ 3142.390000 bgd. counts: snr = 2.644040
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.707410 pixels
  Position = (218.6, 350.7) = 17 46 2.46 -28 55 12.3
  Extent = 8.5 (5.4-14.0)", rotation angle = 0
  Source counts = 148.2 +/- 57.4
  Background counts = 3142.4
  Rate = 0.004 +/- 0.002
[Tue Jun  4 02:09:42 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 02:09:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 02:09:42 2013] Assessing source extent using major axis lower bound
[Tue Jun  4 02:09:42 2013] Source does appear to be extended
[Tue Jun  4 02:09:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 02:10:51 2013] XMMSAS src. selection expression = ellipse(18965.528800, 30463.492000, 512.727615, 512.727615, 0.000000, X, Y)
[Tue Jun  4 02:10:51 2013] Writing source region out to fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src51_src.reg
[Tue Jun  4 02:10:51 2013] Extracting stamp from image fullrun_pn_xmm0604300701_pi300-10000_cl_sm2.00.img.gz, (189, 321) - (248, 380)
[Tue Jun  4 02:10:51 2013] XMMSAS bgd. selection expression = annulus(18965.528800, 30463.492000, 854.546025, 1709.092049, X, Y) && !ellipse(21808.828000, 32953.306000, 1595.240046, 292.824008, 118.143300, X, Y) && !ellipse(16675.805664, 32136.001434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20984.496063, 28908.322144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16457.069748, 32759.189911, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun  4 02:10:51 2013] Writing fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src51.gif
[Tue Jun  4 03:30:19 2013] Mean detx,y = (5668.38, 6356.93) 
[Tue Jun  4 03:30:25 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  4 03:30:48 2013] Binned source spectrum to 10 counts/bin
[Tue Jun  4 03:30:49 2013] Setting source spectrum file to fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Tue Jun  4 03:30:49 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Tue Jun  4 10:21:05 2013] Updating aperture counts using extracted products
[Tue Jun  4 10:21:05 2013] Total counts from fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 1479.00
[Tue Jun  4 10:21:05 2013] Total counts from fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src51_bgd.pi.gz = 9950.00
[Tue Jun  4 10:21:05 2013] Got source and background scale factors 838400.000000, 6336240.000000
[Tue Jun  4 10:21:05 2013] User source parameters:
  Position = (218.6, 350.7) = 17 46 2.46 -28 55 12.3
  Extent = 8.5 (5.4-14.0)", rotation angle = 0
  Source aperture counts = 162.4 +/- 39.5
  Background aperture counts = 1316.6
  Rate = 0.005 +/- 0.001

[Tue Jun  4 10:21:18 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun  4 10:21:18 2013] Using photon index=1.80, rate=0.00411, arf fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src51.arf
[Tue Jun  4 10:21:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  4 10:21:18 2013] Updating source flux to 3.7e-14
[Tue Jun  4 10:23:01 2013] xmm0604300701/analysis//spectral/fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete