[Mon Jun  3 03:44:50 2013] Detection parameters:
  Position = (300.3, 264.2) = 17 45 35.39 -29 1 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 517.6 +/- 35.7
  Background counts = 404.4
  Rate = 0.02 +/- 0.001

[Mon Jun  3 03:44:55 2013] Off-axis axis estimate = 2.49'
[Mon Jun  3 03:53:36 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 03:53:36 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Mon Jun  3 03:53:36 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.976
[Mon Jun  3 03:53:36 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.67"
[Mon Jun  3 08:11:31 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src30.ximg exists
[Mon Jun  3 08:11:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src30.csv
[Mon Jun  3 08:11:31 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon Jun  3 08:11:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src30.csv
[Mon Jun  3 08:11:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 08:11:33 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon Jun  3 08:11:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon Jun  3 08:11:33 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Jun  3 08:11:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon Jun  3 08:11:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:01:34 2013] Source 32 is offset by 4.499756 and -7.381665 pixels which is larger than
2 X fitted extent = 7.054529 x 7.054529, not incorporating fit results
[Mon Jun  3 16:01:34 2013] Spatial fit model total counts = 4045.450000, observed total counts = 3009.000000
[Mon Jun  3 16:01:34 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 16:01:34 2013] Spatial fit model total counts = 3796.450000, observed total counts = 3792.000000
[Mon Jun  3 16:01:34 2013] Offset between fit and detection position for source 32 = 0.942977 pixels
[Mon Jun  3 16:01:34 2013] Warning, changing simple spatial fit ID from 30 to 62
[Mon Jun  3 16:01:34 2013] 3765.492000 total counts/ 3690.050000 bgd. counts: snr = 1.241930
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.942977 pixels
  Position = (299.9, 265.1) = 17 45 35.50 -29 1 25.0
  Extent = 3.5 (2.5-4.7)", rotation angle = 0
  Source counts = 75.4 +/- 61.4
  Background counts = 3690.1
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability