[Mon Jun 3 03:44:50 2013] Detection parameters: Position = (310.2, 275.0) = 17 45 32.08 -29 0 41.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 267.3 +/- 27.0 Background counts = 400.5 Rate = 0.01 +/- 0.001 [Mon Jun 3 03:44:55 2013] Off-axis axis estimate = 1.90' [Mon Jun 3 03:53:36 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 03:53:36 2013] Initial guess for spatial extent in simple fitting = 7.38" [Mon Jun 3 03:53:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.622 [Mon Jun 3 03:53:36 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 7.38" [Mon Jun 3 08:11:31 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src29.ximg exists [Mon Jun 3 08:11:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src29.csv [Mon Jun 3 08:11:31 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src29_1.ximg exists [Mon Jun 3 08:11:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src29.csv [Mon Jun 3 08:11:31 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 08:11:33 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Mon Jun 3 08:11:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src29.csv [Mon Jun 3 08:11:33 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Mon Jun 3 08:11:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src29.csv [Mon Jun 3 08:11:33 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 16:01:34 2013] Source 31 is offset by 6.431297 and -5.700518 pixels which is larger than 2 X fitted extent = 0.848147 x 0.848147, not incorporating fit results [Mon Jun 3 16:01:34 2013] Spatial fit model total counts = 3756.940000, observed total counts = 2580.000000 [Mon Jun 3 16:01:34 2013] Poor agreement between spatial fit and data for source 31 It may help to tweak spatial fit manually Not incorporating fit results [Mon Jun 3 16:01:34 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 16:01:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 16:01:34 2013] Assessing source extent using major [Mon Jun 3 16:01:34 2013] Source does appear to be extended [Mon Jun 3 16:01:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 16:02:46 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 16:02:46 2013] Initial guess for spatial extent in simple fitting = 7.38" [Mon Jun 3 16:02:46 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.622 [Mon Jun 3 16:02:46 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 7.38" [Mon Jun 3 19:23:06 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_src27.ximg exists [Mon Jun 3 19:23:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_src27.csv [Mon Jun 3 19:23:06 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_src27_1.ximg exists [Mon Jun 3 19:23:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_src27.csv [Mon Jun 3 19:23:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 19:23:09 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src27.ximg exists [Mon Jun 3 19:23:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src27.csv [Mon Jun 3 19:23:09 2013] fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists [Mon Jun 3 19:23:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src27.csv [Mon Jun 3 19:23:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 4 02:09:42 2013] Spatial fit model total counts = 4571.500000, observed total counts = 3030.000000 [Tue Jun 4 02:09:42 2013] Poor agreement between spatial fit and data for source 31 It may help to tweak spatial fit manually Not incorporating fit results [Tue Jun 4 02:09:42 2013] Source 31 is offset by -2.611209 and -1.309667 pixels which is larger than 2 X fitted extent = 1.100032 x 1.100032, not incorporating fit results [Tue Jun 4 02:09:42 2013] Vigneting correction estimate = 1.000000 [Tue Jun 4 02:09:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 4 02:09:42 2013] Assessing source extent using major [Tue Jun 4 02:09:42 2013] Source does appear to be extended [Tue Jun 4 02:09:42 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jun 4 02:10:50 2013] XMMSAS src. selection expression = ellipse(26941.850800, 23878.716949, 652.500000, 652.500000, 0.000000, X, Y) [Tue Jun 4 02:10:50 2013] Writing source region out to fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src31_src.reg [Tue Jun 4 02:10:50 2013] Extracting stamp from image fullrun_pn_xmm0604300701_pi300-10000_cl_sm2.00.img.gz, (273, 238) - (348, 313) [Tue Jun 4 02:10:50 2013] XMMSAS bgd. selection expression = annulus(26941.850800, 23878.716949, 1087.500000, 2175.000000, X, Y) && !ellipse(24858.567800, 24183.457800, 993.680029, 836.888024, 35.352100, X, Y) && !ellipse(23827.098800, 24668.238800, 1185.984034, 1015.520029, 52.475500, X, Y) && !ellipse(26954.687866, 26389.169281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24418.882660, 26215.426819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26159.565002, 25358.022278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26654.496000, 25856.164000, 1069.144031, 1069.144031, 0.000000, X, Y) && !ellipse(25261.690000, 22451.882000, 1108.648032, 1108.648032, 0.000000, X, Y) && !ellipse(24174.651825, 21992.192520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27783.914581, 26829.033295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25890.144000, 26138.536000, 1069.288031, 1069.288031, 0.000000, X, Y) && !ellipse(27702.545898, 26306.042969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27236.651978, 25683.433289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28106.864380, 25356.315094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27570.654663, 25096.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27677.270020, 24143.412750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26627.304169, 22755.166962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24004.785706, 22566.702362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26286.204590, 22320.615662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25586.468964, 21828.674576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27132.529694, 21190.405533, 870.000000, 870.000000, 0.000000, X, Y) [Tue Jun 4 02:10:50 2013] Writing fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src31.gif [Tue Jun 4 03:02:25 2013] Mean detx,y = (-1866.26, -530.94) [Tue Jun 4 03:02:34 2013] Setting backscal keywords in source and bgd. spectrum [Tue Jun 4 03:03:04 2013] Binned source spectrum to 10 counts/bin [Tue Jun 4 03:03:04 2013] Setting source spectrum file to fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Tue Jun 4 03:03:04 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src31_bgd.pi.gz [Tue Jun 4 04:41:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue Jun 4 04:41:01 2013] rmf not generated due to insufficient counts [Tue Jun 4 10:20:58 2013] Updating aperture counts using extracted products [Tue Jun 4 10:20:58 2013] Total counts from fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 2002.00 [Tue Jun 4 10:20:58 2013] Total counts from fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src31_bgd.pi.gz = 2838.00 [Tue Jun 4 10:20:58 2013] Got source and background scale factors 871754.000000, 1621296.000000 [Tue Jun 4 10:20:58 2013] User source parameters: Position = (310.2, 275.0) = 17 45 32.08 -29 0 41.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 476.0 +/- 45.8 Background aperture counts = 1526.0 Rate = 0.01 +/- 0.001 [Tue Jun 4 10:20:58 2013] Updating counts from extracted products [Tue Jun 4 10:20:58 2013] Set source signif. to 476.04/39.06 = 12.19 [Tue Jun 4 10:21:18 2013] Calculating source flux in energy range 0.30-8.00 [Tue Jun 4 10:21:18 2013] Using photon index=1.80, rate=0.0132, arf fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src31.arf [Tue Jun 4 10:21:18 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jun 4 10:21:18 2013] Updating source flux to 1.9e-13 [Tue Jun 4 10:22:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Jun 4 10:23:01 2013] xmm0604300701/analysis//spectral/fullrun_pn_xmm0604300701_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete