[Mon Jun  3 03:47:01 2013] Detection parameters:
  Position = (401.6, 218.0) = 17 45 1.76 -29 4 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.9 +/- 12.0
  Background counts = 26.5
  Rate = 0.001 +/- 0.0002

[Mon Jun  3 03:47:02 2013] Off-axis axis estimate = 9.48'
[Mon Jun  3 11:47:13 2013] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 11:47:13 2013] Initial guess for spatial extent in simple fitting = 11.17"
[Mon Jun  3 11:47:13 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.956
[Mon Jun  3 11:47:13 2013] Giving source the simple spatial ID 80 for pass 0, mean size = 11.17"
[Mon Jun  3 16:01:07 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src80.ximg exists
[Mon Jun  3 16:01:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src80.csv
[Mon Jun  3 16:01:07 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src80_1.ximg exists
[Mon Jun  3 16:01:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src80.csv
[Mon Jun  3 16:01:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:01:08 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Mon Jun  3 16:01:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src80.csv
[Mon Jun  3 16:01:08 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Mon Jun  3 16:01:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src80.csv
[Mon Jun  3 16:01:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:02:12 2013] Source 74 is offset by -1.574761 and 9.151125 pixels which is larger than
2 X fitted extent = 1.607773 x 1.607773, not incorporating fit results
[Mon Jun  3 16:02:12 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:02:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:02:12 2013] Assessing source extent using major
[Mon Jun  3 16:02:12 2013] Source does appear to be extended
[Mon Jun  3 16:02:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 16:02:12 2013] Deleting source due to low Poisson probability 0.9