[Mon Jun  3 03:47:01 2013] Detection parameters:
  Position = (275.4, 254.4) = 17 45 43.64 -29 2 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.6 +/- 19.7
  Background counts = 149.1
  Rate = 0.002 +/- 0.0005

[Mon Jun  3 03:47:02 2013] Off-axis axis estimate = 3.60'
[Mon Jun  3 11:47:13 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 11:47:13 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Mon Jun  3 11:47:13 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.092
[Mon Jun  3 11:47:13 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 8.23"
[Mon Jun  3 16:01:07 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src65.ximg exists
[Mon Jun  3 16:01:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src65.csv
[Mon Jun  3 16:01:07 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src65_1.ximg exists
[Mon Jun  3 16:01:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src65.csv
[Mon Jun  3 16:01:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:01:08 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Mon Jun  3 16:01:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src65.csv
[Mon Jun  3 16:01:08 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Mon Jun  3 16:01:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src65.csv
[Mon Jun  3 16:01:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:02:12 2013] Warning, spatial fit 65 centroid is now closest to src. 65
[Mon Jun  3 16:02:12 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:02:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:02:12 2013] Assessing source extent using major
[Mon Jun  3 16:02:12 2013] Source does appear to be extended
[Mon Jun  3 16:02:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 22:25:40 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 22:25:40 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Mon Jun  3 22:25:40 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.092
[Mon Jun  3 22:25:40 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 8.23"
[Tue Jun  4 02:09:14 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_src57.ximg exists
[Tue Jun  4 02:09:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_src57.csv
[Tue Jun  4 02:09:14 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_src57_1.ximg exists
[Tue Jun  4 02:09:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_src57.csv
[Tue Jun  4 02:09:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 02:09:16 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Tue Jun  4 02:09:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src57.csv
[Tue Jun  4 02:09:16 2013] fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Tue Jun  4 02:09:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src57.csv
[Tue Jun  4 02:09:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300701_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 02:10:20 2013] Spatial fit model total counts = 1853.790000, observed total counts = 1625.000000
[Tue Jun  4 02:10:20 2013] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  4 02:10:20 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 02:10:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 02:10:20 2013] Assessing source extent using major
[Tue Jun  4 02:10:20 2013] Source does appear to be extended
[Tue Jun  4 02:10:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 07:55:30 2013] XMMSAS src. selection expression = ellipse(23909.703796, 22086.306671, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun  4 07:55:30 2013] Writing source region out to fullrun_mos2_xmm0604300701_pi300-10000_pass1_cl_src58_src.reg
[Tue Jun  4 07:55:30 2013] Extracting stamp from image fullrun_mos2_xmm0604300701_pi300-10000_cl_sm2.00.img.gz, (238, 217) - (313, 292)
[Tue Jun  4 07:55:30 2013] XMMSAS bgd. selection expression = annulus(23909.703796, 22086.306671, 1087.500000, 2175.000000, X, Y) && !ellipse(24849.262909, 24218.820892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.285797, 24489.742737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25680.648000, 24414.018000, 2206.240063, 1291.216037, 124.939000, X, Y) && !ellipse(25081.822235, 24896.341888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25205.400574, 23025.990570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24760.855743, 19339.084137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26735.977173, 23310.028259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.942000, 25308.764000, 1103.120032, 1103.120032, 0.000000, X, Y) && !ellipse(26158.888800, 23320.583400, 1215.496035, 1215.496035, 0.000000, X, Y) && !ellipse(26089.684000, 25319.904000, 1751.912050, 1751.912050, 0.000000, X, Y) && !ellipse(21814.148000, 21690.776000, 1754.808050, 1754.808050, 0.000000, X, Y) && !ellipse(25645.976000, 22490.372000, 1226.936035, 1226.936035, 0.000000, X, Y) && !ellipse(23782.469482, 23186.075562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21397.000000, 20567.726822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22551.348800, 21065.644400, 1903.808055, 683.907220, 39.274000, X, Y) && !ellipse(21961.990000, 18733.640800, 1561.784045, 239.287207, 2.095610, X, Y) && !ellipse(20256.521600, 20673.314000, 1520.416044, 1520.416044, 0.000000, X, Y) && !ellipse(22685.958200, 20985.462400, 1421.528041, 336.510410, 204.834000, X, Y)
[Tue Jun  4 07:55:30 2013] Writing fullrun_mos2_xmm0604300701_pi300-10000_pass1_cl_src58.gif
[Tue Jun  4 08:38:53 2013] Mean detx,y = (-1013.49, 2080.51) 
[Tue Jun  4 08:38:56 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  4 08:39:09 2013] Binned source spectrum to 10 counts/bin
[Tue Jun  4 08:39:10 2013] Setting source spectrum file to fullrun_mos2_xmm0604300701_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Tue Jun  4 08:39:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604300701_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Tue Jun  4 10:14:27 2013] Not generating rmf since there are only 80 counts
[Tue Jun  4 10:14:27 2013] rmf not generated due to insufficient counts
[Tue Jun  4 10:21:47 2013] Updating aperture counts using extracted products
[Tue Jun  4 10:21:47 2013] Total counts from fullrun_mos2_xmm0604300701_pi300-10000_pass1_cl_src58_src_b10.pi.gz = 1157.00
[Tue Jun  4 10:21:47 2013] Total counts from fullrun_mos2_xmm0604300701_pi300-10000_pass1_cl_src58_bgd.pi.gz = 1823.00
[Tue Jun  4 10:21:47 2013] Got source and background scale factors 1168496.000000, 2896460.000000
[Tue Jun  4 10:21:47 2013] User source parameters:
  Position = (275.4, 254.4) = 17 45 43.64 -29 2 9.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 421.6 +/- 35.0
  Background aperture counts = 735.4
  Rate = 0.009 +/- 0.0007

[Tue Jun  4 10:21:47 2013] Updating counts from extracted products
[Tue Jun  4 10:21:47 2013] Set source signif. to 421.56/27.12 = 15.54
[Tue Jun  4 10:21:52 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun  4 10:21:52 2013] Using photon index=1.80, rate=0.00868, arf fullrun_mos2_xmm0604300701_pi300-10000_pass1_cl_src58.arf
[Tue Jun  4 10:21:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  4 10:21:52 2013] Updating source flux to 1.6e-13
[Tue Jun  4 10:22:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun  4 10:22:46 2013] xmm0604300701/analysis//spectral/fullrun_mos2_xmm0604300701_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete