[Mon Jun  3 03:46:03 2013] Detection parameters:
  Position = (275.6, 87.5) = 17 45 43.59 -29 14 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.8 +/- 12.9
  Background counts = 38.0
  Rate = 0.001 +/- 0.0003

[Mon Jun  3 03:46:03 2013] Off-axis axis estimate = 15.38'
[Mon Jun  3 08:11:34 2013] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 08:11:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun  3 08:11:34 2013] Initial guess for spatial extent in simple fitting = 14.12"
[Mon Jun  3 08:11:34 2013] source mask rpix=3.2, npix_max = 56, mask sum = 49, frac = 0.873
[Mon Jun  3 08:11:34 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 14.12"
[Mon Jun  3 11:47:11 2013] fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_src63.ximg exists
[Mon Jun  3 11:47:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_src63.csv
[Mon Jun  3 11:47:11 2013] fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_src63_1.ximg exists
[Mon Jun  3 11:47:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_src63.csv
[Mon Jun  3 11:47:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 11:47:13 2013] fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Mon Jun  3 11:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src63.csv
[Mon Jun  3 11:47:13 2013] fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Mon Jun  3 11:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src63.csv
[Mon Jun  3 11:47:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604300701_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:01:53 2013] Source 65 is offset by 1.244621 and -6.922649 pixels which is larger than
2 X fitted extent = 1.630198 x 1.630198, not incorporating fit results
[Mon Jun  3 16:01:53 2013] Warning, spatial fit 63 centroid is now closest to src. 5
[Mon Jun  3 16:01:53 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:01:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:01:53 2013] Assessing source extent using major
[Mon Jun  3 16:01:53 2013] Source does appear to be extended
[Mon Jun  3 16:01:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 16:01:53 2013] Deleting source due to low Poisson probability 0.9