[Tue Jun 18 01:36:39 2013] Detection parameters:
  Position = (247.9, 230.1) = 17 45 52.71 -29 3 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.5 +/- 25.4
  Background counts = 213.5
  Rate = 0.007 +/- 0.0009

[Tue Jun 18 01:36:40 2013] Off-axis axis estimate = 6.16'
[Tue Jun 18 01:44:57 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 01:44:57 2013] Initial guess for spatial extent in simple fitting = 9.51"
[Tue Jun 18 01:44:57 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.247
[Tue Jun 18 01:44:57 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 9.51"
[Tue Jun 18 05:07:53 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src55.ximg exists
[Tue Jun 18 05:07:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src55.csv
[Tue Jun 18 05:07:53 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src55_1.ximg exists
[Tue Jun 18 05:07:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src55.csv
[Tue Jun 18 05:07:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 05:07:55 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Tue Jun 18 05:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src55.csv
[Tue Jun 18 05:07:55 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Tue Jun 18 05:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src55.csv
[Tue Jun 18 05:07:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 09:41:44 2013] Spatial fit model total counts = 2654.880000, observed total counts = 1933.000000
[Tue Jun 18 09:41:44 2013] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 09:41:44 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 09:41:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 09:41:44 2013] Assessing source extent using major
[Tue Jun 18 09:41:44 2013] Source does appear to be extended
[Tue Jun 18 09:41:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 09:42:35 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 09:42:35 2013] Initial guess for spatial extent in simple fitting = 9.51"
[Tue Jun 18 09:42:35 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.247
[Tue Jun 18 09:42:35 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 9.51"
[Tue Jun 18 12:32:32 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src44.ximg exists
[Tue Jun 18 12:32:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src44.csv
[Tue Jun 18 12:32:32 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src44_1.ximg exists
[Tue Jun 18 12:32:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src44.csv
[Tue Jun 18 12:32:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 12:32:33 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Tue Jun 18 12:32:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src44.csv
[Tue Jun 18 12:32:33 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Tue Jun 18 12:32:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src44.csv
[Tue Jun 18 12:32:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 16:35:41 2013] Source 61 is offset by -4.612342 and 6.605918 pixels which is larger than
2 X fitted extent = 2.194244 x 2.194244, not incorporating fit results
[Tue Jun 18 16:35:41 2013] Spatial fit model total counts = 2654.450000, observed total counts = 1933.000000
[Tue Jun 18 16:35:41 2013] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 16:35:41 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 16:35:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 16:35:41 2013] Assessing source extent using major
[Tue Jun 18 16:35:41 2013] Source does appear to be extended
[Tue Jun 18 16:35:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 16:36:13 2013] XMMSAS src. selection expression = ellipse(21522.418274, 19966.022842, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 16:36:13 2013] Writing source region out to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src61_src.reg
[Tue Jun 18 16:36:13 2013] Extracting stamp from image fullrun_pn_xmm0604300601_pi300-10000_cl_sm2.00.img.gz, (210, 193) - (285, 268)
[Tue Jun 18 16:36:13 2013] XMMSAS bgd. selection expression = annulus(21522.418274, 19966.022842, 1087.500000, 2175.000000, X, Y) && !ellipse(23957.945679, 22755.851959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24029.002228, 22138.943954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21703.553665, 21692.526001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22172.361481, 21281.068146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20145.614740, 21141.506000, 1554.800045, 1554.800045, 0.000000, X, Y) && !ellipse(22943.434200, 20936.584400, 2069.336060, 567.898416, 39.184177, X, Y) && !ellipse(23855.973969, 18838.158432, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 16:36:13 2013] Writing fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src61.gif
[Tue Jun 18 17:29:01 2013] Mean detx,y = (3728.62, -4237.49) 
[Tue Jun 18 17:29:04 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 17:29:24 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 17:29:24 2013] Setting source spectrum file to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Tue Jun 18 17:29:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Tue Jun 18 20:22:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 20:22:54 2013] rmf not generated due to insufficient counts
[Wed Jun 19 00:10:27 2013] Updating aperture counts using extracted products
[Wed Jun 19 00:10:27 2013] Total counts from fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 1402.00
[Wed Jun 19 00:10:27 2013] Total counts from fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src61_bgd.pi.gz = 4328.00
[Wed Jun 19 00:10:27 2013] Got source and background scale factors 1098580.000000, 4901626.000000
[Wed Jun 19 00:10:27 2013] User source parameters:
  Position = (247.9, 230.1) = 17 45 52.71 -29 3 59.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 432.0 +/- 38.5
  Background aperture counts = 970.0
  Rate = 0.01 +/- 0.001

[Wed Jun 19 00:10:27 2013] Updating counts from extracted products
[Wed Jun 19 00:10:27 2013] Set source signif. to 431.98/31.15 = 13.87
[Wed Jun 19 00:10:30 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 00:10:30 2013] Using photon index=1.80, rate=0.0133, arf fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src61.arf
[Wed Jun 19 00:10:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 00:10:30 2013] Updating source flux to 1.2e-13
[Wed Jun 19 00:11:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 00:11:33 2013] xmm0604300601/analysis//spectral/fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete