[Tue Jun 18 01:36:38 2013] Detection parameters:
  Position = (300.0, 264.2) = 17 45 35.43 -29 1 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 316.9 +/- 27.4
  Background counts = 308.2
  Rate = 0.01 +/- 0.001

[Tue Jun 18 01:36:40 2013] Off-axis axis estimate = 2.48'
[Tue Jun 18 01:44:57 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 01:44:57 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Tue Jun 18 01:44:57 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.781
[Tue Jun 18 01:44:57 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 7.67"
[Tue Jun 18 05:07:53 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src39.ximg exists
[Tue Jun 18 05:07:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src39.csv
[Tue Jun 18 05:07:53 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src39_1.ximg exists
[Tue Jun 18 05:07:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src39.csv
[Tue Jun 18 05:07:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 05:07:54 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Tue Jun 18 05:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src39.csv
[Tue Jun 18 05:07:54 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Tue Jun 18 05:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src39.csv
[Tue Jun 18 05:07:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 09:41:44 2013] Warning, spatial fit 39 centroid is now closest to src. 47
[Tue Jun 18 09:41:44 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 09:41:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 09:41:44 2013] Assessing source extent using major
[Tue Jun 18 09:41:44 2013] Source does appear to be extended
[Tue Jun 18 09:41:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 09:42:35 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 09:42:35 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Tue Jun 18 09:42:35 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.781
[Tue Jun 18 09:42:35 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 7.67"
[Tue Jun 18 12:32:31 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src32.ximg exists
[Tue Jun 18 12:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src32.csv
[Tue Jun 18 12:32:31 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Jun 18 12:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src32.csv
[Tue Jun 18 12:32:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 12:32:33 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Jun 18 12:32:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Jun 18 12:32:33 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Jun 18 12:32:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Jun 18 12:32:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 16:35:41 2013] Source 44 is offset by -3.168851 and 6.280451 pixels which is larger than
2 X fitted extent = 1.084648 x 7.052874, not incorporating fit results
[Tue Jun 18 16:35:41 2013] Source 44 is offset by -0.147172 and -3.913182 pixels which is larger than
2 X fitted extent = 0.896239 x 0.896239, not incorporating fit results
[Tue Jun 18 16:35:41 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 16:35:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 16:35:41 2013] Assessing source extent using major
[Tue Jun 18 16:35:41 2013] Source does appear to be extended
[Tue Jun 18 16:35:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 16:36:12 2013] XMMSAS src. selection expression = ellipse(26053.477997, 22939.301208, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 16:36:12 2013] Writing source region out to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src44_src.reg
[Tue Jun 18 16:36:12 2013] Extracting stamp from image fullrun_pn_xmm0604300601_pi300-10000_cl_sm2.00.img.gz, (263, 227) - (338, 302)
[Tue Jun 18 16:36:13 2013] XMMSAS bgd. selection expression = annulus(26053.477997, 22939.301208, 1087.500000, 2175.000000, X, Y) && !ellipse(24859.510800, 24228.007200, 1076.128031, 849.112024, 30.022400, X, Y) && !ellipse(23805.306400, 24608.531600, 1185.816034, 1185.816034, 0.000000, X, Y) && !ellipse(23544.454000, 25756.516000, 1158.728033, 516.673615, 46.805800, X, Y) && !ellipse(28268.590179, 25761.953125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27313.002655, 25543.112335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26665.552000, 25497.694000, 860.544025, 860.544025, 0.000000, X, Y) && !ellipse(27234.395203, 25079.403503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26760.745941, 23785.310364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23957.945679, 22755.851959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25415.628448, 22668.846649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24029.002228, 22138.943954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24828.139496, 22656.710510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22943.434200, 20936.584400, 2069.336060, 567.898416, 39.184177, X, Y)
[Tue Jun 18 16:36:13 2013] Writing fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src44.gif
[Tue Jun 18 17:18:13 2013] Mean detx,y = (-1007.07, -1562.54) 
[Tue Jun 18 17:18:17 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 17:18:39 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 17:18:39 2013] Setting source spectrum file to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Jun 18 17:18:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue Jun 18 20:10:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 20:10:02 2013] rmf not generated due to insufficient counts
[Wed Jun 19 00:10:24 2013] Updating aperture counts using extracted products
[Wed Jun 19 00:10:24 2013] Total counts from fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 2459.00
[Wed Jun 19 00:10:24 2013] Total counts from fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src44_bgd.pi.gz = 5205.00
[Wed Jun 19 00:10:24 2013] Got source and background scale factors 1098212.000000, 3699582.000000
[Wed Jun 19 00:10:24 2013] User source parameters:
  Position = (300.0, 264.2) = 17 45 35.43 -29 1 21.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 913.9 +/- 50.6
  Background aperture counts = 1545.1
  Rate = 0.03 +/- 0.002

[Wed Jun 19 00:10:24 2013] Updating counts from extracted products
[Wed Jun 19 00:10:24 2013] Set source signif. to 913.91/39.31 = 23.25
[Wed Jun 19 00:10:30 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 00:10:30 2013] Using photon index=1.80, rate=0.0282, arf fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src44.arf
[Wed Jun 19 00:10:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 00:10:30 2013] Updating source flux to 2.1e-13
[Wed Jun 19 00:11:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 00:11:33 2013] xmm0604300601/analysis//spectral/fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete