[Tue Jun 18 01:36:38 2013] Detection parameters:
  Position = (308.2, 274.0) = 17 45 32.74 -29 0 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.6 +/- 22.6
  Background counts = 319.7
  Rate = 0.006 +/- 0.0008

[Tue Jun 18 01:36:40 2013] Off-axis axis estimate = 1.91'
[Tue Jun 18 01:44:57 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 01:44:57 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Tue Jun 18 01:44:57 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Tue Jun 18 01:44:57 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 7.38"
[Tue Jun 18 05:07:53 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src37.ximg exists
[Tue Jun 18 05:07:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src37.csv
[Tue Jun 18 05:07:53 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src37_1.ximg exists
[Tue Jun 18 05:07:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src37.csv
[Tue Jun 18 05:07:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 05:07:54 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Tue Jun 18 05:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src37.csv
[Tue Jun 18 05:07:54 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Tue Jun 18 05:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src37.csv
[Tue Jun 18 05:07:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 09:41:44 2013] Source 42 is offset by 6.941654 and -4.488295 pixels which is larger than
2 X fitted extent = 2.480956 x 6.695402, not incorporating fit results
[Tue Jun 18 09:41:44 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 09:41:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 09:41:44 2013] Assessing source extent using major
[Tue Jun 18 09:41:44 2013] Source does appear to be extended
[Tue Jun 18 09:41:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 09:42:35 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 09:42:35 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Tue Jun 18 09:42:35 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Tue Jun 18 09:42:35 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 7.38"
[Tue Jun 18 12:32:31 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src31.ximg exists
[Tue Jun 18 12:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src31.csv
[Tue Jun 18 12:32:31 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue Jun 18 12:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src31.csv
[Tue Jun 18 12:32:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 12:32:33 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue Jun 18 12:32:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue Jun 18 12:32:33 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue Jun 18 12:32:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue Jun 18 12:32:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 16:35:41 2013] Source 42 is offset by 6.941654 and -4.326915 pixels which is larger than
2 X fitted extent = 3.575333 x 3.575333, not incorporating fit results
[Tue Jun 18 16:35:41 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 16:35:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 16:35:41 2013] Assessing source extent using major
[Tue Jun 18 16:35:41 2013] Source does appear to be extended
[Tue Jun 18 16:35:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 16:36:12 2013] XMMSAS src. selection expression = ellipse(26760.745941, 23785.310364, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 16:36:12 2013] Writing source region out to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src42_src.reg
[Tue Jun 18 16:36:12 2013] Extracting stamp from image fullrun_pn_xmm0604300601_pi300-10000_cl_sm2.00.img.gz, (271, 236) - (346, 311)
[Tue Jun 18 16:36:12 2013] XMMSAS bgd. selection expression = annulus(26760.745941, 23785.310364, 1087.500000, 2175.000000, X, Y) && !ellipse(24859.510800, 24228.007200, 1076.128031, 849.112024, 30.022400, X, Y) && !ellipse(23805.306400, 24608.531600, 1185.816034, 1185.816034, 0.000000, X, Y) && !ellipse(23987.050110, 26219.751862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25795.602966, 26096.292999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24390.999542, 26141.444427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27313.000000, 26240.328339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23544.454000, 25756.516000, 1158.728033, 516.673615, 46.805800, X, Y) && !ellipse(28268.590179, 25761.953125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27313.002655, 25543.112335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26665.552000, 25497.694000, 860.544025, 860.544025, 0.000000, X, Y) && !ellipse(27234.395203, 25079.403503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26053.477997, 22939.301208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23957.945679, 22755.851959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25415.628448, 22668.846649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24029.002228, 22138.943954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24828.139496, 22656.710510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22943.434200, 20936.584400, 2069.336060, 567.898416, 39.184177, X, Y)
[Tue Jun 18 16:36:12 2013] Writing fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src42.gif
[Tue Jun 18 17:17:15 2013] Mean detx,y = (-1663.24, -597.21) 
[Tue Jun 18 17:17:20 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 17:17:50 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 17:17:51 2013] Setting source spectrum file to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Tue Jun 18 17:17:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Tue Jun 18 20:09:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 20:09:37 2013] rmf not generated due to insufficient counts
[Wed Jun 19 00:10:23 2013] Updating aperture counts using extracted products
[Wed Jun 19 00:10:23 2013] Total counts from fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 1803.00
[Wed Jun 19 00:10:23 2013] Total counts from fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src42_bgd.pi.gz = 4329.00
[Wed Jun 19 00:10:23 2013] Got source and background scale factors 877646.000000, 3100541.000000
[Wed Jun 19 00:10:24 2013] User source parameters:
  Position = (308.2, 274.0) = 17 45 32.74 -29 0 59.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 577.6 +/- 43.5
  Background aperture counts = 1225.4
  Rate = 0.02 +/- 0.001

[Wed Jun 19 00:10:24 2013] Updating counts from extracted products
[Wed Jun 19 00:10:24 2013] Set source signif. to 577.62/35.01 = 16.50
[Wed Jun 19 00:10:30 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 00:10:30 2013] Using photon index=1.80, rate=0.0178, arf fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src42.arf
[Wed Jun 19 00:10:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 00:10:30 2013] Updating source flux to 1.7e-13
[Wed Jun 19 00:11:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 00:11:33 2013] xmm0604300601/analysis//spectral/fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete