[Tue Jun 18 01:36:36 2013] Detection parameters:
  Position = (314.5, 302.2) = 17 45 30.63 -28 58 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.4 +/- 20.6
  Background counts = 273.0
  Rate = 0.004 +/- 0.0007

[Tue Jun 18 01:36:40 2013] Off-axis axis estimate = 1.20'
[Tue Jun 18 01:44:57 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 01:44:57 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Tue Jun 18 01:44:57 2013] source mask rpix=1.6, npix_max = 17, mask sum = 9, frac = 0.503
[Tue Jun 18 01:44:57 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 7.03"
[Tue Jun 18 05:07:53 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src26.ximg exists
[Tue Jun 18 05:07:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src26.csv
[Tue Jun 18 05:07:53 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue Jun 18 05:07:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src26.csv
[Tue Jun 18 05:07:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 05:07:54 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue Jun 18 05:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue Jun 18 05:07:54 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue Jun 18 05:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue Jun 18 05:07:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 09:41:44 2013] Warning, spatial fit 26 centroid is now closest to src. 36
[Tue Jun 18 09:41:44 2013] Source 29 is offset by -4.332069 and 1.096234 pixels which is larger than
2 X fitted extent = 0.851853 x 0.851853, not incorporating fit results
[Tue Jun 18 09:41:44 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 09:41:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 09:41:44 2013] Assessing source extent using major
[Tue Jun 18 09:41:44 2013] Source does appear to be extended
[Tue Jun 18 09:41:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 09:42:35 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 09:42:35 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Tue Jun 18 09:42:35 2013] source mask rpix=1.6, npix_max = 17, mask sum = 9, frac = 0.503
[Tue Jun 18 09:42:35 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 7.03"
[Tue Jun 18 12:32:31 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src22.ximg exists
[Tue Jun 18 12:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src22.csv
[Tue Jun 18 12:32:31 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src22_1.ximg exists
[Tue Jun 18 12:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src22.csv
[Tue Jun 18 12:32:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 12:32:32 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Tue Jun 18 12:32:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue Jun 18 12:32:33 2013] fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Tue Jun 18 12:32:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue Jun 18 12:32:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 16:35:41 2013] Warning, spatial fit 22 centroid is now closest to src. 35
[Tue Jun 18 16:35:41 2013] Source 29 is offset by -3.685195 and 1.005314 pixels which is larger than
2 X fitted extent = 2.663582 x 0.851853, not incorporating fit results
[Tue Jun 18 16:35:41 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 16:35:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 16:35:41 2013] Assessing source extent using major
[Tue Jun 18 16:35:41 2013] Source does appear to be extended
[Tue Jun 18 16:35:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 16:36:12 2013] XMMSAS src. selection expression = ellipse(27313.000000, 26240.328339, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 16:36:12 2013] Writing source region out to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src29_src.reg
[Tue Jun 18 16:36:12 2013] Extracting stamp from image fullrun_pn_xmm0604300601_pi300-10000_cl_sm2.00.img.gz, (277, 265) - (352, 340)
[Tue Jun 18 16:36:12 2013] XMMSAS bgd. selection expression = annulus(27313.000000, 26240.328339, 1087.500000, 2175.000000, X, Y) && !ellipse(24859.510800, 24228.007200, 1076.128031, 849.112024, 30.022400, X, Y) && !ellipse(25903.989000, 28793.879800, 387.151211, 387.151211, 0.000000, X, Y) && !ellipse(25795.602966, 26096.292999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24390.999542, 26141.444427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28268.590179, 25761.953125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27313.002655, 25543.112335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26665.552000, 25497.694000, 860.544025, 860.544025, 0.000000, X, Y) && !ellipse(27234.395203, 25079.403503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26760.745941, 23785.310364, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 16:36:12 2013] Writing fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src29.gif
[Tue Jun 18 17:08:58 2013] Mean detx,y = (-2518.73, 1703.98) 
[Tue Jun 18 17:09:01 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 17:09:19 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 17:09:20 2013] Setting source spectrum file to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jun 18 17:09:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Jun 18 19:56:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 19:56:34 2013] rmf not generated due to insufficient counts
[Wed Jun 19 00:10:20 2013] Updating aperture counts using extracted products
[Wed Jun 19 00:10:21 2013] Total counts from fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 1685.00
[Wed Jun 19 00:10:21 2013] Total counts from fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src29_bgd.pi.gz = 6816.00
[Wed Jun 19 00:10:21 2013] Got source and background scale factors 1008110.000000, 5262899.000000
[Wed Jun 19 00:10:21 2013] User source parameters:
  Position = (314.5, 302.2) = 17 45 30.63 -28 58 48.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 379.4 +/- 42.1
  Background aperture counts = 1305.6
  Rate = 0.01 +/- 0.001

[Wed Jun 19 00:10:21 2013] Updating counts from extracted products
[Wed Jun 19 00:10:21 2013] Set source signif. to 379.39/36.13 = 10.50
[Wed Jun 19 00:10:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 00:10:29 2013] Using photon index=1.80, rate=0.0117, arf fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src29.arf
[Wed Jun 19 00:10:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 00:10:29 2013] Updating source flux to 1e-13
[Wed Jun 19 00:11:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 00:11:33 2013] xmm0604300601/analysis//spectral/fullrun_pn_xmm0604300601_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete