[Tue Jun 18 01:38:18 2013] Detection parameters:
  Position = (284.6, 223.3) = 17 45 40.54 -29 4 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 279.6 +/- 24.1
  Background counts = 167.7
  Rate = 0.008 +/- 0.0007

[Tue Jun 18 01:38:19 2013] Off-axis axis estimate = 5.54'
[Tue Jun 18 07:23:06 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 07:23:06 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Tue Jun 18 07:23:06 2013] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.549
[Tue Jun 18 07:23:06 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.20"
[Tue Jun 18 09:41:21 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jun 18 09:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src10.csv
[Tue Jun 18 09:41:21 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jun 18 09:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src10.csv
[Tue Jun 18 09:41:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 09:41:22 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jun 18 09:41:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jun 18 09:41:22 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jun 18 09:41:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jun 18 09:41:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 09:42:11 2013] Warning, spatial fit 10 centroid is now closest to src. 49
[Tue Jun 18 09:42:11 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 09:42:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 09:42:11 2013] Assessing source extent using major
[Tue Jun 18 09:42:11 2013] Source does appear to be extended
[Tue Jun 18 09:42:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 14:25:40 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 14:25:40 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Tue Jun 18 14:25:40 2013] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.549
[Tue Jun 18 14:25:40 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.20"
[Tue Jun 18 16:35:27 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jun 18 16:35:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_src10.csv
[Tue Jun 18 16:35:27 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jun 18 16:35:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_src10.csv
[Tue Jun 18 16:35:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 16:35:28 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jun 18 16:35:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jun 18 16:35:28 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jun 18 16:35:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jun 18 16:35:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 16:35:57 2013] Warning, spatial fit 10 centroid is now closest to src. 49
[Tue Jun 18 16:35:57 2013] Source 48 is offset by 2.893140 and 5.516595 pixels which is larger than
2 X fitted extent = 1.098083 x 1.098083, not incorporating fit results
[Tue Jun 18 16:35:57 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 16:35:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 16:35:57 2013] Assessing source extent using major
[Tue Jun 18 16:35:57 2013] Source does appear to be extended
[Tue Jun 18 16:35:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 22:36:42 2013] XMMSAS src. selection expression = ellipse(24713.989166, 19382.744766, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 22:36:42 2013] Writing source region out to fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src48_src.reg
[Tue Jun 18 22:36:42 2013] Extracting stamp from image fullrun_mos2_xmm0604300601_pi300-10000_cl_sm2.00.img.gz, (247, 186) - (322, 261)
[Tue Jun 18 22:36:42 2013] XMMSAS bgd. selection expression = annulus(24713.989166, 19382.744766, 1087.500000, 2175.000000, X, Y) && !ellipse(23888.814026, 18833.987381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25446.251800, 22629.388000, 1198.696034, 372.028011, 87.180510, X, Y)
[Tue Jun 18 22:36:42 2013] Writing fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src48.gif
[Tue Jun 18 22:44:20 2013] Mean detx,y = (-227.68, 4860.57) 
[Tue Jun 18 22:44:21 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 22:44:37 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 22:44:37 2013] Setting source spectrum file to fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Tue Jun 18 22:44:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Tue Jun 18 23:16:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 23:16:53 2013] rmf not generated due to insufficient counts
[Wed Jun 19 00:10:39 2013] Updating aperture counts using extracted products
[Wed Jun 19 00:10:39 2013] Total counts from fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 605.00
[Wed Jun 19 00:10:39 2013] Total counts from fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src48_bgd.pi.gz = 3505.00
[Wed Jun 19 00:10:39 2013] Got source and background scale factors 1068308.000000, 8608442.000000
[Wed Jun 19 00:10:39 2013] User source parameters:
  Position = (284.6, 223.3) = 17 45 40.54 -29 4 29.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 170.0 +/- 25.6
  Background aperture counts = 435.0
  Rate = 0.004 +/- 0.0007

[Wed Jun 19 00:10:39 2013] Updating counts from extracted products
[Wed Jun 19 00:10:39 2013] Set source signif. to 170.03/20.86 = 8.15
[Wed Jun 19 00:10:47 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 00:10:47 2013] Using photon index=1.80, rate=0.00442, arf fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src48.arf
[Wed Jun 19 00:10:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 00:10:47 2013] Updating source flux to 1.1e-13
[Wed Jun 19 00:11:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 00:11:22 2013] xmm0604300601/analysis//spectral/fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete