[Tue Jun 18 01:38:15 2013] Detection parameters:
  Position = (286.3, 279.1) = 17 45 39.99 -29 0 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4435.4 +/- 83.7
  Background counts = 261.1
  Rate = 0.1 +/- 0.002

[Tue Jun 18 01:38:19 2013] Off-axis axis estimate = 1.66'
[Tue Jun 18 07:23:06 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 07:23:06 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Tue Jun 18 07:23:06 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Tue Jun 18 07:23:06 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Tue Jun 18 09:41:21 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 18 09:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src1.csv
[Tue Jun 18 09:41:21 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 18 09:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src1.csv
[Tue Jun 18 09:41:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 09:41:21 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 18 09:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jun 18 09:41:21 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 18 09:41:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jun 18 09:41:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 09:42:11 2013] Spatial fit model total counts = 9380.070000, observed total counts = 8290.000000
[Tue Jun 18 09:42:11 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 09:42:11 2013] Spatial fit model total counts = 4943.150000, observed total counts = 4978.000000
[Tue Jun 18 09:42:11 2013] Offset between fit and detection position for source 1 = 3.936489 pixels
[Tue Jun 18 09:42:11 2013] Warning, changing simple spatial fit ID from 1 to 8
[Tue Jun 18 09:42:11 2013] 4694.420000 total counts/ 3610.050000 bgd. counts: snr = 18.047659
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.936489 pixels
  Position = (284.6, 282.6) = 17 45 40.56 -29 0 11.4
  Extent = 13.9 (12.3-27.7)" x 9.4 (7.9-10.8)", rotation angle = 32 (19-48) degrees
  Source counts = 1084.4 +/- 68.5
  Background counts = 3610.1
  Rate = 0.03 +/- 0.002
[Tue Jun 18 09:42:11 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 09:42:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 09:42:11 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 09:42:11 2013] Source does appear to be extended
[Tue Jun 18 09:42:11 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Tue Jun 18 09:42:12 2013] Source is confused with source 4
[Tue Jun 18 09:42:12 2013] Source is confused with source 35
[Tue Jun 18 14:25:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 18 14:25:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 14:25:40 2013] Initial guess for spatial extent in simple fitting = 11.60"
[Tue Jun 18 14:25:40 2013] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.221
[Tue Jun 18 14:25:40 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.60"
[Tue Jun 18 16:35:27 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 18 16:35:27 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 18 16:35:27 2013] Fit fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jun 18 16:35:28 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 18 16:35:28 2013] fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 18 16:35:28 2013] Fit fullrun_mos2_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 18 16:35:57 2013] Spatial fit model total counts = 14566.400000, observed total counts = 13459.000000
[Tue Jun 18 16:35:57 2013] Offset between fit and detection position for source 1 = 3.452328 pixels
[Tue Jun 18 16:35:57 2013] 14122.880000 total counts/ 10528.100000 bgd. counts: snr = 35.034612
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.452328 pixels
  Position = (286.0, 279.5) = 17 45 40.08 -29 0 25.0
  Extent = 13.9 (11.5-17.3)" x 10.7 (10.1-11.5)", rotation angle = 12 (3-24) degrees
  Source counts = 3594.8 +/- 118.8
  Background counts = 10528.1
  Rate = 0.09 +/- 0.003
[Tue Jun 18 16:35:57 2013] Spatial fit model total counts = 7579.000000, observed total counts = 7857.000000
[Tue Jun 18 16:35:57 2013] Offset between fit and detection position for source 1 = 0.700868 pixels
[Tue Jun 18 16:35:57 2013] Warning, changing simple spatial fit ID from 1 to 3
[Tue Jun 18 16:35:57 2013] 5552.507000 total counts/ 4565.580000 bgd. counts: snr = 14.606194
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.700868 pixels
  Position = (286.7, 279.2) = 17 45 39.87 -29 0 26.1
  Extent = 8.9 (7.4-10.2)" x 3.1 (2.6-3.6)", rotation angle = 88 (84-92) degrees
  Source counts = 986.9 +/- 74.5
  Background counts = 4565.6
  Rate = 0.03 +/- 0.002
[Tue Jun 18 16:35:57 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 16:35:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 16:35:57 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 16:35:57 2013] Source does appear to be extended
[Tue Jun 18 16:35:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.05
[Tue Jun 18 16:35:57 2013] Source is asymmetric
[Tue Jun 18 22:36:42 2013] XMMSAS src. selection expression = ellipse(24890.578000, 24245.547000, 534.487215, 185.424005, 88.149690, X, Y)
[Tue Jun 18 22:36:42 2013] Writing source region out to fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 18 22:36:42 2013] Extracting stamp from image fullrun_mos2_xmm0604300601_pi300-10000_cl_sm2.00.img.gz, (256, 249) - (317, 310)
[Tue Jun 18 22:36:42 2013] XMMSAS bgd. selection expression = annulus(24890.578000, 24245.547000, 890.812026, 1781.624051, X, Y) && !ellipse(23804.269928, 24912.338440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25343.021362, 24311.619476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23432.199880, 26574.858000, 1192.112034, 431.088812, 102.043600, X, Y) && !ellipse(23462.814575, 25962.426422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25146.039429, 25000.655334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25140.641754, 23261.191650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24300.778992, 26233.021698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.000000, 26833.706146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25446.251800, 22629.388000, 1198.696034, 372.028011, 87.180510, X, Y) && !ellipse(25891.746887, 23371.255890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25785.692000, 24569.512000, 1142.104033, 1142.104033, 0.000000, X, Y) && !ellipse(26704.007965, 23798.312042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26496.822000, 25218.924000, 2284.208066, 2284.208066, 0.000000, X, Y) && !ellipse(26279.740000, 22848.280000, 1198.192034, 1198.192034, 0.000000, X, Y) && !ellipse(27072.994000, 25796.994000, 2221.616064, 1680.624048, 139.662000, X, Y) && !ellipse(26568.428894, 23725.797882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26141.694000, 25677.717010, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 22:36:42 2013] Writing fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src1.gif
[Tue Jun 18 22:36:48 2013] Mean detx,y = (94.07, 15.47) 
[Tue Jun 18 22:36:49 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 22:36:58 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 22:36:58 2013] Setting source spectrum file to fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 18 22:36:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 19 00:10:37 2013] Updating aperture counts using extracted products
[Wed Jun 19 00:10:37 2013] Total counts from fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2828.00
[Wed Jun 19 00:10:38 2013] Total counts from fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1837.00
[Wed Jun 19 00:10:38 2013] Got source and background scale factors 302172.000000, 1149764.000000
[Wed Jun 19 00:10:38 2013] User source parameters:
  Position = (286.7, 279.2) = 17 45 39.87 -29 0 26.1
  Extent = 8.9 (7.4-10.2)" x 3.1 (2.6-3.6)", rotation angle = 88 (84-92) degrees
  Source aperture counts = 2345.2 +/- 54.2
  Background aperture counts = 482.8
  Rate = 0.06 +/- 0.001

[Wed Jun 19 00:10:46 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 00:10:46 2013] Using photon index=1.80, rate=0.0257, arf fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src1.arf
[Wed Jun 19 00:10:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 00:10:46 2013] Updating source flux to 7.3e-13
[Wed Jun 19 00:11:09 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Jun 19 00:11:09 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Jun 19 00:11:22 2013] xmm0604300601/analysis//spectral/fullrun_mos2_xmm0604300601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete