[Tue Jun 18 01:37:19 2013] Detection parameters:
  Position = (203.3, 287.1) = 17 46 7.52 -28 59 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.4 +/- 23.9
  Background counts = 213.2
  Rate = 0.004 +/- 0.0006

[Tue Jun 18 01:37:20 2013] Off-axis axis estimate = 6.95'
[Tue Jun 18 05:07:55 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 05:07:55 2013] Initial guess for spatial extent in simple fitting = 9.90"
[Tue Jun 18 05:07:55 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.167
[Tue Jun 18 05:07:55 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.90"
[Tue Jun 18 07:23:04 2013] fullrun_mos1_xmm0604300601_pi300-10000_cl_pass0_src20.ximg exists
[Tue Jun 18 07:23:04 2013] fullrun_mos1_xmm0604300601_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Jun 18 07:23:04 2013] Fit fullrun_mos1_xmm0604300601_pi300-10000_cl_pass0_src20 appears to have run properly
[Tue Jun 18 07:23:05 2013] fullrun_mos1_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Jun 18 07:23:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jun 18 07:23:05 2013] fullrun_mos1_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Jun 18 07:23:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jun 18 07:23:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604300601_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 09:41:58 2013] Spatial fit model total counts = 856.885000, observed total counts = 810.000000
[Tue Jun 18 09:41:58 2013] Offset between fit and detection position for source 29 = 0.339474 pixels
[Tue Jun 18 09:41:58 2013] 841.950000 total counts/ 349.633000 bgd. counts: snr = 26.329258
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.339474 pixels
  Position = (203.4, 287.4) = 17 46 7.48 -28 59 50.3
  Extent = 19.8 (19.8-19.8)" x 14.7 (8.0-19.8)", rotation angle = 89 (90-90) degrees
  Source counts = 492.3 +/- 29.0
  Background counts = 349.6
  Rate = 0.01 +/- 0.0008
[Tue Jun 18 09:41:58 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 09:41:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 09:41:58 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 09:41:58 2013] Source does appear to be extended
[Tue Jun 18 09:41:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Tue Jun 18 12:32:34 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 18 12:32:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 12:32:34 2013] Initial guess for spatial extent in simple fitting = 17.28"
[Tue Jun 18 12:32:34 2013] source mask rpix=4.0, npix_max = 79, mask sum = 75, frac = 0.938
[Tue Jun 18 12:32:34 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 17.28"
[Tue Jun 18 14:25:39 2013] fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_src21.ximg exists
[Tue Jun 18 14:25:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_src21.csv
[Tue Jun 18 14:25:39 2013] fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Jun 18 14:25:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_src21.csv
[Tue Jun 18 14:25:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 14:25:40 2013] fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Jun 18 14:25:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue Jun 18 14:25:40 2013] fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Jun 18 14:25:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue Jun 18 14:25:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604300601_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 16:35:48 2013] Warning, spatial fit 21 centroid is now closest to src. 14
[Tue Jun 18 16:35:49 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 16:35:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 16:35:49 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 16:35:49 2013] Source does appear to be extended
[Tue Jun 18 16:35:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Tue Jun 18 20:27:20 2013] XMMSAS src. selection expression = ellipse(17644.951200, 24956.384400, 1188.372034, 884.886025, 89.173019, X, Y)
[Tue Jun 18 20:27:20 2013] Writing source region out to fullrun_mos1_xmm0604300601_pi300-10000_pass1_cl_src29_src.reg
[Tue Jun 18 20:27:20 2013] Extracting stamp from image fullrun_mos1_xmm0604300601_pi300-10000_cl_sm2.00.img.gz, (135, 219) - (272, 356)
[Tue Jun 18 20:27:20 2013] XMMSAS bgd. selection expression = annulus(17644.951200, 24956.384400, 1980.620057, 3961.240114, X, Y) && !ellipse(21088.478000, 29431.038000, 1386.224040, 565.218416, 50.851300, X, Y) && !ellipse(20865.221600, 29042.675600, 1423.480041, 271.462408, 298.036000, X, Y) && !ellipse(22310.244200, 21277.883000, 1929.576056, 870.888025, 231.320000, X, Y) && !ellipse(21473.075882, 28923.054901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21992.860600, 21588.929880, 1952.112056, 685.109620, 41.500200, X, Y)
[Tue Jun 18 20:27:20 2013] Writing fullrun_mos1_xmm0604300601_pi300-10000_pass1_cl_src29.gif
[Tue Jun 18 20:44:53 2013] Mean detx,y = (-876.28, 6989.37) 
[Tue Jun 18 20:44:54 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 20:45:35 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 20:45:36 2013] Setting source spectrum file to fullrun_mos1_xmm0604300601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jun 18 20:45:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604300601_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Jun 19 00:10:34 2013] Updating aperture counts using extracted products
[Wed Jun 19 00:10:34 2013] Total counts from fullrun_mos1_xmm0604300601_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 1253.00
[Wed Jun 19 00:10:34 2013] Total counts from fullrun_mos1_xmm0604300601_pi300-10000_pass1_cl_src29_bgd.pi.gz = 16321.00
[Wed Jun 19 00:10:34 2013] Got source and background scale factors 2800628.000000, 34806795.000000
[Wed Jun 19 00:10:34 2013] User source parameters:
  Position = (203.4, 287.4) = 17 46 7.48 -28 59 50.3
  Extent = 19.8 (19.8-19.8)" x 14.7 (8.0-19.8)", rotation angle = 89 (90-90) degrees
  Source aperture counts = -60.2 +/- 36.4
  Background aperture counts = 1313.2
  Rate = -0.002 +/- 0.001

[Wed Jun 19 00:10:37 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 00:10:37 2013] Using photon index=1.80, rate=0.0135, arf fullrun_mos1_xmm0604300601_pi300-10000_pass1_cl_src29.arf
[Wed Jun 19 00:10:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 00:10:37 2013] Updating source flux to 2.8e-13
[Wed Jun 19 00:11:09 2013] xmm0604300601/analysis//spectral/fullrun_mos1_xmm0604300601_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete