[Sat Aug 25 09:44:52 2012] Detection parameters:
  Position = (286.6, 278.1) = 5 1 6.71 45 16 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18648.1 +/- 162.1
  Background counts = 38.6
  Rate = 0.4 +/- 0.003

[Sat Aug 25 09:44:52 2012] Off-axis axis estimate = 1.71'
[Sat Aug 25 10:24:55 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:24:55 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Aug 25 10:24:55 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Sat Aug 25 10:24:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Aug 25 10:51:08 2012] fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 25 10:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 25 10:51:09 2012] fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 25 10:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 25 10:51:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:51:09 2012] fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 25 10:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Aug 25 10:51:09 2012] fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 25 10:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Aug 25 10:51:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:51:20 2012] Source 1 is offset by -6.094632 and -7.640378 pixels which is larger than
2 X fitted extent = 0.837113 x 0.837113, not incorporating fit results
[Sat Aug 25 10:51:20 2012] Spatial fit model total counts = 2331.030000, observed total counts = 1938.000000
[Sat Aug 25 10:51:20 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 10:51:20 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:51:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:51:20 2012] Assessing source extent using major
[Sat Aug 25 10:51:20 2012] Source does appear to be extended
[Sat Aug 25 10:51:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 11:09:15 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 11:09:15 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Aug 25 11:09:15 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Sat Aug 25 11:09:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sat Aug 25 11:36:30 2012] fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 25 11:36:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 25 11:36:30 2012] fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 25 11:36:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 25 11:36:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 11:36:30 2012] fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 25 11:36:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug 25 11:36:30 2012] fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 25 11:36:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug 25 11:36:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604220101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 11:36:35 2012] Source 1 is offset by -6.094632 and -7.640378 pixels which is larger than
2 X fitted extent = 0.837113 x 0.837113, not incorporating fit results
[Sat Aug 25 11:36:35 2012] Spatial fit model total counts = 2328.120000, observed total counts = 1938.000000
[Sat Aug 25 11:36:35 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 11:36:35 2012] Source 1 is offset by 2.858931 and -1.523504 pixels which is larger than
2 X fitted extent = 1.383310 x 3.049462, not incorporating fit results
[Sat Aug 25 11:36:35 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 11:36:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 11:36:35 2012] Assessing source extent using major
[Sat Aug 25 11:36:35 2012] Source does appear to be extended
[Sat Aug 25 11:36:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 11:48:34 2012] Counts = 18648.099609, rescaling region sizes by 3.000000
[Sat Aug 25 11:48:34 2012] XMMSAS src. selection expression = ellipse(24885.897003, 24142.417114, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sat Aug 25 11:48:34 2012] Writing source region out to fullrun_mos2_xmm0604220101_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug 25 11:48:34 2012] Extracting stamp from image fullrun_mos2_xmm0604220101_pi300-10000_cl_sm2.00.img.gz, (174, 166) - (399, 391)
[Sat Aug 25 11:48:34 2012] XMMSAS bgd. selection expression = annulus(24885.897003, 24142.417114, 9787.500000, 19575.000000, X, Y) && !ellipse(18801.434067, 33465.024139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21246.462494, 10590.224297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36408.971069, 24327.268219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8630.711784, 27775.545929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40822.620600, 27654.629400, 635.095218, 635.095218, 0.000000, X, Y) && !ellipse(17054.446030, 18359.119461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36450.278015, 29521.448059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32804.231200, 28317.748600, 396.433611, 396.433611, 0.000000, X, Y) && !ellipse(24111.974548, 23441.502655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25705.715100, 35864.133000, 276.079208, 276.079208, 0.000000, X, Y) && !ellipse(29912.217926, 17539.675201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24085.503906, 24746.500000, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 11:48:34 2012] Writing fullrun_mos2_xmm0604220101_pi300-10000_pass1_cl_src1.gif
[Sat Aug 25 11:48:44 2012] Mean detx,y = (62.77, 64.05) 
[Sat Aug 25 11:48:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 11:59:17 2012] grppha failed
[Sat Aug 25 11:59:17 2012] Setting source spectrum file to fullrun_mos2_xmm0604220101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Aug 25 11:59:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604220101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug 25 12:02:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 12:02:54 2012] rmf not generated due to insufficient counts
[Sat Aug 25 12:03:39 2012] Updating aperture counts using extracted products
[Sat Aug 25 12:03:39 2012] Error reading totcts from fullrun_mos2_xmm0604220101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Aug 25 12:03:39 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 12:03:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 12:03:42 2012] xmm0604220101/analysis//spectral/fullrun_mos2_xmm0604220101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete