[Sat Aug 25 09:44:35 2012] Detection parameters:
  Position = (289.2, 200.1) = 5 1 5.62 45 10 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.4 +/- 10.7
  Background counts = 28.6
  Rate = 0.001 +/- 0.0003

[Sat Aug 25 09:44:35 2012] Off-axis axis estimate = 7.16'
[Sat Aug 25 10:03:21 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:03:21 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Sat Aug 25 10:03:21 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.147
[Sat Aug 25 10:03:21 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.01"
[Sat Aug 25 10:24:54 2012] fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_src12.ximg exists
[Sat Aug 25 10:24:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_src12.csv
[Sat Aug 25 10:24:54 2012] fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Aug 25 10:24:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_src12.csv
[Sat Aug 25 10:24:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:24:55 2012] fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Aug 25 10:24:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Aug 25 10:24:55 2012] fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Aug 25 10:24:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Aug 25 10:24:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604220101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:51:18 2012] Spatial fit model total counts = 353.312000, observed total counts = 312.000000
[Sat Aug 25 10:51:18 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 10:51:18 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:51:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:51:18 2012] Assessing source extent using major
[Sat Aug 25 10:51:18 2012] Source does appear to be extended
[Sat Aug 25 10:51:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 10:51:18 2012] Deleting source due to low Poisson probability 0.9