[Sun Dec 25 11:08:00 2011] Detection parameters:
  Position = (342.6, 366.7) = 23 9 41.91 21 39 30.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.5 +/- 20.3
  Background counts = 155.1
  Rate = 0.003 +/- 0.0006

[Sun Dec 25 11:08:02 2011] Off-axis axis estimate = 5.90'
[Sun Dec 25 11:18:31 2011] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 11:18:31 2011] Initial guess for spatial extent in simple fitting = 9.38"
[Sun Dec 25 11:18:31 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.886
[Sun Dec 25 11:18:31 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 9.38"
[Sun Dec 25 13:15:26 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src9.ximg exists
[Sun Dec 25 13:15:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src9.csv
[Sun Dec 25 13:15:26 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Dec 25 13:15:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src9.csv
[Sun Dec 25 13:15:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 13:15:27 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Dec 25 13:15:27 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Dec 25 13:15:27 2011] Fit fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Dec 25 16:30:34 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.833820 pixels away
[Sun Dec 25 16:30:34 2011] Warning, spatial fit 9 centroid is now closest to src. 8
[Sun Dec 25 16:30:34 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:30:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:30:34 2011] Assessing source extent using major
[Sun Dec 25 16:30:34 2011] Source does appear to be extended
[Sun Dec 25 16:30:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:30:34 2011] Source is confused with source 8
[Sun Dec 25 16:31:16 2011] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 16:31:16 2011] Initial guess for spatial extent in simple fitting = 9.38"
[Sun Dec 25 16:31:16 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.886
[Sun Dec 25 16:31:16 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 9.38"
[Sun Dec 25 18:09:41 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src9.ximg exists
[Sun Dec 25 18:09:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src9.csv
[Sun Dec 25 18:09:41 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Dec 25 18:09:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src9.csv
[Sun Dec 25 18:09:41 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 18:09:41 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Dec 25 18:09:41 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Dec 25 18:09:41 2011] Fit fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Dec 25 21:03:58 2011] Source 9 is offset by -0.890118 and 7.260693 pixels which is larger than
2 X fitted extent = 1.066115 x 1.066115, not incorporating fit results
[Sun Dec 25 21:03:58 2011] Warning, spatial fit 9 centroid is now closest to src. 8
[Sun Dec 25 21:03:58 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 21:03:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 21:03:58 2011] Assessing source extent using major
[Sun Dec 25 21:03:58 2011] Source does appear to be extended
[Sun Dec 25 21:03:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 21:04:36 2011] XMMSAS src. selection expression = ellipse(29761.077728, 31857.162292, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 25 21:04:36 2011] Writing source region out to fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src9_src.reg
[Sun Dec 25 21:04:36 2011] Extracting stamp from image fullrun_pn_xmm0604060101_pi300-10000_cl_sm2.00.img.gz, (305, 329) - (380, 404)
[Sun Dec 25 21:04:36 2011] XMMSAS bgd. selection expression = annulus(29761.077728, 31857.162292, 1087.500000, 2175.000000, X, Y) && !ellipse(32263.703033, 34231.788635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.855499, 31940.862091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30796.441000, 30399.394800, 485.388014, 485.388014, 0.000000, X, Y)
[Sun Dec 25 21:04:36 2011] Writing fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src9.gif
[Sun Dec 25 21:26:37 2011] Mean detx,y = (-729.18, -5558.86) 
[Sun Dec 25 21:26:44 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 21:27:33 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 21:27:34 2011] Setting source spectrum file to fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Dec 25 21:27:34 2011] Setting bgd. spectrum file to fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Dec 25 22:44:17 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec 25 22:44:17 2011] rmf not generated due to insufficient counts
[Mon Dec 26 01:21:50 2011] Updating aperture counts using extracted products
[Mon Dec 26 01:21:51 2011] Error reading totcts from fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Dec 26 01:21:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 01:21:53 2011] Using photon index=1.80, rate=0.00301, arf fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src9.arf
[Mon Dec 26 01:21:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 01:21:53 2011] Updating source flux to 1e-14
[Mon Dec 26 01:25:10 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting