[Sun Dec 25 11:08:01 2011] Detection parameters:
  Position = (250.5, 259.2) = 23 10 10.64 21 31 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.8 +/- 22.6
  Background counts = 154.1
  Rate = 0.005 +/- 0.0007

[Sun Dec 25 11:08:02 2011] Off-axis axis estimate = 4.49'
[Sun Dec 25 11:18:31 2011] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 11:18:31 2011] Initial guess for spatial extent in simple fitting = 8.67"
[Sun Dec 25 11:18:31 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Sun Dec 25 11:18:31 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 8.67"
[Sun Dec 25 13:15:26 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src21.ximg exists
[Sun Dec 25 13:15:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src21.csv
[Sun Dec 25 13:15:26 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Dec 25 13:15:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src21.csv
[Sun Dec 25 13:15:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 13:15:27 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Dec 25 13:15:27 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Dec 25 13:15:27 2011] Fit fullrun_pn_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Dec 25 16:30:34 2011] Spatial fit model total counts = 647.446000, observed total counts = 648.000000
[Sun Dec 25 16:30:34 2011] Offset between fit and detection position for source 21 = 3.002672 pixels
[Sun Dec 25 16:30:34 2011] 623.679000 total counts/ 140.241000 bgd. counts: snr = 40.822847
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 3.002672 pixels
  Position = (251.8, 261.9) = 23 10 10.23 21 31 56.2
  Extent = 17.3 (17.3-34.7)", rotation angle = 0
  Source counts = 483.4 +/- 25.0
  Background counts = 140.2
  Rate = 0.01 +/- 0.0006
[Sun Dec 25 16:30:34 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:30:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:30:34 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 16:30:34 2011] Source does appear to be extended
[Sun Dec 25 16:30:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:31:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 16:31:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 16:31:16 2011] Initial guess for spatial extent in simple fitting = 17.35"
[Sun Dec 25 16:31:16 2011] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.006
[Sun Dec 25 16:31:16 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 17.35"
[Sun Dec 25 18:09:41 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src21.ximg exists
[Sun Dec 25 18:09:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src21.csv
[Sun Dec 25 18:09:41 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Dec 25 18:09:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src21.csv
[Sun Dec 25 18:09:41 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 18:09:41 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Dec 25 18:09:41 2011] fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Dec 25 18:09:41 2011] Fit fullrun_pn_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Dec 25 21:03:58 2011] Warning, spatial fit 21 centroid is now closest to src. 25
[Sun Dec 25 21:03:58 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 21:03:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 21:03:58 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 21:03:58 2011] Source does appear to be extended
[Sun Dec 25 21:03:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 21:04:36 2011] XMMSAS src. selection expression = ellipse(21859.821000, 22741.120400, 1040.724030, 1040.724030, 0.000000, X, Y)
[Sun Dec 25 21:04:36 2011] Writing source region out to fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src21_src.reg
[Sun Dec 25 21:04:36 2011] Extracting stamp from image fullrun_pn_xmm0604060101_pi300-10000_cl_sm2.00.img.gz, (192, 202) - (312, 322)
[Sun Dec 25 21:04:36 2011] XMMSAS bgd. selection expression = annulus(21859.821000, 22741.120400, 1734.540050, 3469.080100, X, Y) && !ellipse(25322.529800, 25535.606400, 539.451216, 539.451216, 0.000000, X, Y) && !ellipse(17565.714401, 23925.474670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17702.387344, 21185.967651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18131.502472, 21251.765915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24380.573242, 20147.407806, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 25 21:04:36 2011] Writing fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src21.gif
[Sun Dec 25 21:46:34 2011] Mean detx,y = (-3008.19, 6277.31) 
[Sun Dec 25 21:46:45 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 21:48:06 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 21:48:07 2011] Setting source spectrum file to fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Dec 25 21:48:07 2011] Setting bgd. spectrum file to fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Dec 26 01:21:51 2011] Updating aperture counts using extracted products
[Mon Dec 26 01:21:51 2011] Error reading totcts from fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Dec 26 01:21:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 01:21:53 2011] Using photon index=1.80, rate=0.0123, arf fullrun_pn_xmm0604060101_pi300-10000_pass1_cl_src21.arf
[Mon Dec 26 01:21:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 01:21:53 2011] Updating source flux to 4.1e-14