[Sun Dec 25 11:10:19 2011] Detection parameters:
  Position = (329.3, 299.8) = 23 9 46.07 21 34 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.7 +/- 12.8
  Background counts = 32.3
  Rate = 0.001 +/- 0.0003

[Sun Dec 25 11:10:20 2011] Off-axis axis estimate = 2.24'
[Sun Dec 25 14:35:25 2011] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 14:35:25 2011] Initial guess for spatial extent in simple fitting = 7.55"
[Sun Dec 25 14:35:25 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.001
[Sun Dec 25 14:35:25 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 7.55"
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src26.ximg exists
[Sun Dec 25 16:30:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src26.csv
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Dec 25 16:30:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src26.csv
[Sun Dec 25 16:30:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Dec 25 16:30:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Dec 25 16:30:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun Dec 25 16:30:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 16:30:52 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.737002 pixels away
[Sun Dec 25 16:30:52 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:30:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:30:52 2011] Assessing source extent using major
[Sun Dec 25 16:30:52 2011] Source does appear to be extended
[Sun Dec 25 16:30:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 19:17:14 2011] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 19:17:14 2011] Initial guess for spatial extent in simple fitting = 7.55"
[Sun Dec 25 19:17:14 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.001
[Sun Dec 25 19:17:14 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 7.55"
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src26.ximg exists
[Sun Dec 25 21:03:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src26.csv
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Dec 25 21:03:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src26.csv
[Sun Dec 25 21:03:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Dec 25 21:03:46 2011] Fit fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Dec 25 21:04:18 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 15.649756 pixels away
[Sun Dec 25 21:04:18 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.576207 pixels away
[Sun Dec 25 21:04:18 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 21:04:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 21:04:18 2011] Assessing source extent using major
[Sun Dec 25 21:04:18 2011] Source does appear to be extended
[Sun Dec 25 21:04:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 00:37:34 2011] XMMSAS src. selection expression = ellipse(28602.380463, 26034.221069, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 00:37:34 2011] Writing source region out to fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src20_src.reg
[Mon Dec 26 00:37:34 2011] Extracting stamp from image fullrun_mos2_xmm0604060101_pi300-10000_cl_sm2.00.img.gz, (292, 262) - (367, 337)
[Mon Dec 26 00:37:34 2011] XMMSAS bgd. selection expression = annulus(28602.380463, 26034.221069, 1087.500000, 2175.000000, X, Y) && !ellipse(27784.027200, 26727.037000, 434.881613, 434.881613, 0.000000, X, Y)
[Mon Dec 26 00:37:34 2011] Writing fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src20.gif
[Mon Dec 26 00:57:49 2011] Mean detx,y = (-1012.11, -193.72) 
[Mon Dec 26 00:57:52 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 00:58:11 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 00:58:11 2011] Setting source spectrum file to fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Dec 26 00:58:11 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Dec 26 01:19:03 2011] Not generating rmf since there are only 56 counts
[Mon Dec 26 01:19:03 2011] rmf not generated due to insufficient counts
[Mon Dec 26 01:21:58 2011] Updating aperture counts using extracted products
[Mon Dec 26 01:21:58 2011] Error reading totcts from fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Dec 26 01:22:00 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 01:22:00 2011] Using photon index=1.80, rate=0.00113, arf fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src20.arf
[Mon Dec 26 01:22:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 01:22:00 2011] Updating source flux to 1.1e-14
[Mon Dec 26 01:23:48 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting