[Sun Dec 25 11:10:18 2011] Detection parameters:
  Position = (335.8, 367.7) = 23 9 44.03 21 39 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.6 +/- 12.6
  Background counts = 30.9
  Rate = 0.002 +/- 0.0003

[Sun Dec 25 11:10:20 2011] Off-axis axis estimate = 5.71'
[Sun Dec 25 14:35:25 2011] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 14:35:25 2011] Initial guess for spatial extent in simple fitting = 9.28"
[Sun Dec 25 14:35:25 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.901
[Sun Dec 25 14:35:25 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 9.28"
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src13.ximg exists
[Sun Dec 25 16:30:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src13.csv
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Dec 25 16:30:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src13.csv
[Sun Dec 25 16:30:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Dec 25 16:30:21 2011] Fit fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Dec 25 16:30:52 2011] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.912864 pixels away
[Sun Dec 25 16:30:52 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:30:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:30:52 2011] Assessing source extent using major
[Sun Dec 25 16:30:52 2011] Source does appear to be extended
[Sun Dec 25 16:30:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 19:17:14 2011] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 19:17:14 2011] Initial guess for spatial extent in simple fitting = 9.28"
[Sun Dec 25 19:17:14 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.901
[Sun Dec 25 19:17:14 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 9.28"
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src13.ximg exists
[Sun Dec 25 21:03:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src13.csv
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Dec 25 21:03:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src13.csv
[Sun Dec 25 21:03:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Dec 25 21:03:46 2011] Fit fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Dec 25 21:04:18 2011] Source 14 is offset by 4.918442 and 7.249134 pixels which is larger than
2 X fitted extent = 1.066966 x 1.066966, not incorporating fit results
[Sun Dec 25 21:04:18 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 21:04:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 21:04:18 2011] Assessing source extent using major
[Sun Dec 25 21:04:18 2011] Source does appear to be extended
[Sun Dec 25 21:04:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 00:37:33 2011] XMMSAS src. selection expression = ellipse(29170.158478, 31942.566620, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 00:37:33 2011] Writing source region out to fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src14_src.reg
[Mon Dec 26 00:37:33 2011] Extracting stamp from image fullrun_mos2_xmm0604060101_pi300-10000_cl_sm2.00.img.gz, (298, 330) - (373, 405)
[Mon Dec 26 00:37:33 2011] XMMSAS bgd. selection expression = annulus(29170.158478, 31942.566620, 1087.500000, 2175.000000, X, Y)
[Mon Dec 26 00:37:33 2011] Writing fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src14.gif
[Mon Dec 26 00:47:04 2011] Mean detx,y = (1407.47, 5239.62) 
[Mon Dec 26 00:47:09 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 00:48:05 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 00:48:05 2011] Setting source spectrum file to fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Dec 26 00:48:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Dec 26 01:10:03 2011] Not generating rmf since there are only 72 counts
[Mon Dec 26 01:10:03 2011] rmf not generated due to insufficient counts
[Mon Dec 26 01:21:58 2011] Updating aperture counts using extracted products
[Mon Dec 26 01:21:58 2011] Error reading totcts from fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Dec 26 01:21:59 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 01:21:59 2011] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src14.arf
[Mon Dec 26 01:21:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 01:21:59 2011] Updating source flux to 2.5e-14
[Mon Dec 26 01:23:48 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting