[Sun Dec 25 11:10:17 2011] Detection parameters:
  Position = (320.1, 307.9) = 23 9 48.96 21 35 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9453.9 +/- 115.8
  Background counts = 32.2
  Rate = 0.2 +/- 0.002

[Sun Dec 25 11:10:20 2011] Off-axis axis estimate = 1.71'
[Sun Dec 25 14:35:25 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 14:35:25 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Dec 25 14:35:25 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sun Dec 25 14:35:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 25 16:30:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 25 16:30:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 16:30:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 25 16:30:21 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 25 16:30:21 2011] Fit fullrun_mos2_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 25 16:30:52 2011] Spatial fit model total counts = 8591.050000, observed total counts = 8586.000000
[Sun Dec 25 16:30:52 2011] Offset between fit and detection position for source 1 = 0.177412 pixels
[Sun Dec 25 16:30:52 2011] 8575.130000 total counts/ 1935.130000 bgd. counts: snr = 150.943010
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.177412 pixels
  Position = (319.9, 307.8) = 23 9 49.00 21 35 15.6
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 6640.0 +/- 92.6
  Background counts = 1935.1
  Rate = 0.1 +/- 0.002
[Sun Dec 25 16:30:52 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:30:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:30:52 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 16:30:52 2011] Source does appear to be extended
[Sun Dec 25 16:30:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 19:17:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 19:17:14 2011] Initial guess for spatial extent in simple fitting = 5.44"
[Sun Dec 25 19:17:14 2011] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.307
[Sun Dec 25 19:17:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.44"
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 25 21:03:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 25 21:03:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 21:03:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 25 21:03:46 2011] fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 25 21:03:46 2011] Fit fullrun_mos2_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 25 21:04:18 2011] Warning, spatial fit 1 centroid is now closest to src. 20
[Sun Dec 25 21:04:18 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 21:04:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 21:04:18 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 21:04:18 2011] Source does appear to be extended
[Sun Dec 25 21:04:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 00:37:33 2011] Counts = 6640.000000, rescaling region sizes by 2.000000
[Mon Dec 26 00:37:33 2011] XMMSAS src. selection expression = ellipse(27784.027200, 26727.037000, 652.322419, 652.322419, 0.000000, X, Y)
[Mon Dec 26 00:37:33 2011] Writing source region out to fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src1_src.reg
[Mon Dec 26 00:37:33 2011] Extracting stamp from image fullrun_mos2_xmm0604060101_pi300-10000_cl_sm2.00.img.gz, (282, 270) - (357, 345)
[Mon Dec 26 00:37:33 2011] XMMSAS bgd. selection expression = annulus(27784.027200, 26727.037000, 2174.408063, 4348.816125, X, Y) && !ellipse(29170.158478, 31942.566620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22815.255585, 28408.138519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23561.365200, 27445.811800, 250.012007, 250.012007, 0.000000, X, Y) && !ellipse(23697.341600, 31159.613800, 342.506410, 342.506410, 0.000000, X, Y) && !ellipse(23611.028740, 26832.142400, 568.580016, 568.580016, 0.000000, X, Y) && !ellipse(28602.380463, 26034.221069, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 00:37:33 2011] Writing fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src1.gif
[Mon Dec 26 00:37:43 2011] Mean detx,y = (-4.31, 14.76) 
[Mon Dec 26 00:37:46 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 00:38:28 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 00:38:28 2011] Setting source spectrum file to fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 26 00:38:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 26 01:21:57 2011] Updating aperture counts using extracted products
[Mon Dec 26 01:21:57 2011] Error reading totcts from fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 26 01:21:58 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 01:21:58 2011] Using photon index=1.80, rate=0.126, arf fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src1.arf
[Mon Dec 26 01:21:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 01:21:58 2011] Updating source flux to 1.3e-12
[Mon Dec 26 01:25:09 2011] Reading fit data from xmm0604060101/analysis//spectral/fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Dec 26 01:25:09 2011] Spectral fit parameter nH value = 1.29629e+21
[Mon Dec 26 01:25:09 2011] Spectral fit parameter PhoIndex value = 2.34167
[Mon Dec 26 01:25:09 2011] Failed to get F(0.3-8.0) from xmm0604060101/analysis//spectral/fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Dec 26 01:25:09 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 01:25:09 2011] Using Nh = 1.3e+21, photon index=2.34, rate=0.126, arf fullrun_mos2_xmm0604060101_pi300-10000_pass1_cl_src1.arf
[Mon Dec 26 01:25:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 01:25:10 2011] Updating source flux to 1.2e-12