[Sun Dec 25 11:09:03 2011] Detection parameters:
  Position = (335.5, 486.1) = 23 9 44.12 21 48 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.1 +/- 16.9
  Background counts = 26.2
  Rate = 0.004 +/- 0.0003

[Sun Dec 25 11:09:05 2011] Off-axis axis estimate = 13.87'
[Sun Dec 25 13:15:27 2011] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 13:15:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 13:15:27 2011] Initial guess for spatial extent in simple fitting = 13.36"
[Sun Dec 25 13:15:27 2011] source mask rpix=3.1, npix_max = 51, mask sum = 35, frac = 0.686
[Sun Dec 25 13:15:27 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 13.36"
[Sun Dec 25 14:35:24 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_src4.ximg exists
[Sun Dec 25 14:35:24 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Dec 25 14:35:24 2011] Fit fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_src4 appears to have run properly
[Sun Dec 25 14:35:24 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Dec 25 14:35:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Dec 25 14:35:24 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Dec 25 14:35:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Dec 25 14:35:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 16:30:43 2011] Spatial fit model total counts = 412.342000, observed total counts = 406.000000
[Sun Dec 25 16:30:43 2011] Offset between fit and detection position for source 5 = 2.905320 pixels
[Sun Dec 25 16:30:43 2011] 423.383600 total counts/ 343.436000 bgd. counts: snr = 4.314024
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.905320 pixels
  Position = (335.8, 489.0) = 23 9 44.04 21 48 23.9
  Extent = 11.8" x 8.4", rotation angle = 57
  Source counts = 79.9 +/- 20.6
  Background counts = 343.4
  Rate = 0.002 +/- 0.0004
[Sun Dec 25 16:30:43 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:30:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:30:43 2011] Assessing source extent using major
[Sun Dec 25 16:30:43 2011] Source does appear to be extended
[Sun Dec 25 16:30:43 2011] Computing asymmetry using major and minor axis, asym = 1.40
[Sun Dec 25 18:09:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 18:09:42 2011] Initial guess for spatial extent in simple fitting = 10.10"
[Sun Dec 25 18:09:42 2011] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.659
[Sun Dec 25 18:09:42 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 10.10"
[Sun Dec 25 19:17:13 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src4.ximg exists
[Sun Dec 25 19:17:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src4.csv
[Sun Dec 25 19:17:13 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Dec 25 19:17:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src4.csv
[Sun Dec 25 19:17:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 19:17:14 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Dec 25 19:17:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Dec 25 19:17:14 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Dec 25 19:17:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Dec 25 19:17:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 21:04:07 2011] Source 5 is offset by -0.004907 and 2.701794 pixels which is larger than
2 X fitted extent = 2.160694 x 2.160694, not incorporating fit results
[Sun Dec 25 21:04:07 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 21:04:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 21:04:07 2011] Assessing source extent using major
[Sun Dec 25 21:04:07 2011] Source does appear to be extended
[Sun Dec 25 21:04:07 2011] Computing asymmetry using major and minor axis, asym = 1.40
[Sun Dec 25 23:42:22 2011] XMMSAS src. selection expression = ellipse(29163.734457, 42493.704095, 706.312710, 506.029767, 57.453897, X, Y)
[Sun Dec 25 23:42:22 2011] Writing source region out to fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src5_src.reg
[Sun Dec 25 23:42:22 2011] Extracting stamp from image fullrun_mos1_xmm0604060101_pi300-10000_cl_sm2.00.img.gz, (295, 448) - (376, 530)
[Sun Dec 25 23:42:22 2011] XMMSAS bgd. selection expression = annulus(29163.734457, 42493.704095, 1177.187850, 2354.375699, X, Y)
[Sun Dec 25 23:42:22 2011] Writing fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src5.gif
[Sun Dec 25 23:44:48 2011] Mean detx,y = (14453.06, -6683.42) 
[Sun Dec 25 23:44:52 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 23:45:38 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 23:45:39 2011] Setting source spectrum file to fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Dec 25 23:45:39 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Dec 26 00:17:49 2011] Not generating rmf since there are only 79 counts
[Mon Dec 26 00:17:49 2011] rmf not generated due to insufficient counts
[Mon Dec 26 01:21:54 2011] Updating aperture counts using extracted products
[Mon Dec 26 01:21:54 2011] Error reading totcts from fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Dec 26 01:21:56 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 01:21:56 2011] Using photon index=1.80, rate=0.00152, arf fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src5.arf
[Mon Dec 26 01:21:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 01:21:56 2011] Updating source flux to 7.7e-14
[Mon Dec 26 01:22:03 2011] Flag b found in src. 5 procflags, skipping spectral fitting
[Mon Dec 26 01:22:03 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting