[Sun Dec 25 11:09:03 2011] Detection parameters:
  Position = (320.1, 307.8) = 23 9 48.95 21 35 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9583.1 +/- 117.9
  Background counts = 38.4
  Rate = 0.2 +/- 0.002

[Sun Dec 25 11:09:05 2011] Off-axis axis estimate = 1.71'
[Sun Dec 25 13:15:27 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 13:15:27 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Dec 25 13:15:27 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sun Dec 25 13:15:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Dec 25 14:35:24 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 25 14:35:24 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 25 14:35:24 2011] Fit fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Dec 25 14:35:24 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 25 14:35:24 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 25 14:35:24 2011] Fit fullrun_mos1_xmm0604060101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 25 16:30:43 2011] Spatial fit model total counts = 8529.730000, observed total counts = 8540.000000
[Sun Dec 25 16:30:43 2011] Offset between fit and detection position for source 1 = 0.169424 pixels
[Sun Dec 25 16:30:43 2011] 8519.800000 total counts/ 1992.850000 bgd. counts: snr = 146.208621
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.169424 pixels
  Position = (319.9, 307.7) = 23 9 49.00 21 35 15.4
  Extent = 5.5 (5.3-5.6)", rotation angle = 0
  Source counts = 6526.9 +/- 92.3
  Background counts = 1992.8
  Rate = 0.1 +/- 0.002
[Sun Dec 25 16:30:43 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:30:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:30:43 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 16:30:43 2011] Source does appear to be extended
[Sun Dec 25 16:30:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 18:09:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 18:09:42 2011] Initial guess for spatial extent in simple fitting = 5.46"
[Sun Dec 25 18:09:42 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.975
[Sun Dec 25 18:09:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.46"
[Sun Dec 25 19:17:13 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 25 19:17:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 19:17:13 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 25 19:17:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 19:17:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 19:17:13 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 25 19:17:14 2011] fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 25 19:17:14 2011] Fit fullrun_mos1_xmm0604060101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 25 21:04:07 2011] Spatial fit model total counts = 8527.260000, observed total counts = 8539.000000
[Sun Dec 25 21:04:07 2011] Offset between fit and detection position for source 1 = 0.016532 pixels
[Sun Dec 25 21:04:07 2011] 8584.590000 total counts/ 2103.560000 bgd. counts: snr = 141.307945
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.016532 pixels
  Position = (319.9, 307.7) = 23 9 49.00 21 35 15.4
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 6481.0 +/- 92.7
  Background counts = 2103.6
  Rate = 0.1 +/- 0.002
[Sun Dec 25 21:04:07 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 21:04:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 21:04:07 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 21:04:07 2011] Source does appear to be extended
[Sun Dec 25 21:04:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 23:42:22 2011] Counts = 6481.030000, rescaling region sizes by 2.000000
[Sun Dec 25 23:42:22 2011] XMMSAS src. selection expression = ellipse(27784.652200, 26723.413600, 649.008019, 649.008019, 0.000000, X, Y)
[Sun Dec 25 23:42:22 2011] Writing source region out to fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 25 23:42:22 2011] Extracting stamp from image fullrun_mos1_xmm0604060101_pi300-10000_cl_sm2.00.img.gz, (283, 270) - (357, 345)
[Sun Dec 25 23:42:22 2011] XMMSAS bgd. selection expression = annulus(27784.652200, 26723.413600, 2163.360062, 4326.720124, X, Y) && !ellipse(23685.077000, 31177.390580, 255.576007, 255.576007, 0.000000, X, Y) && !ellipse(30776.305176, 30454.181091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25347.876540, 25497.557000, 247.485607, 247.485607, 0.000000, X, Y) && !ellipse(28702.711365, 27821.318634, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 25 23:42:22 2011] Writing fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src1.gif
[Sun Dec 25 23:42:31 2011] Mean detx,y = (231.15, -153.46) 
[Sun Dec 25 23:42:35 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 23:43:18 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 23:43:18 2011] Setting source spectrum file to fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 23:43:18 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 26 01:21:54 2011] Updating aperture counts using extracted products
[Mon Dec 26 01:21:54 2011] Error reading totcts from fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 26 01:21:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 01:21:55 2011] Using photon index=1.80, rate=0.123, arf fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src1.arf
[Mon Dec 26 01:21:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 01:21:56 2011] Updating source flux to 1.2e-12
[Mon Dec 26 01:23:48 2011] Reading fit data from xmm0604060101/analysis//spectral/fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Dec 26 01:23:48 2011] Spectral fit parameter nH value = 1.22565e+21
[Mon Dec 26 01:23:48 2011] Spectral fit parameter PhoIndex value = 2.35864
[Mon Dec 26 01:23:48 2011] Failed to get F(0.3-8.0) from xmm0604060101/analysis//spectral/fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Dec 26 01:23:48 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 01:23:48 2011] Using Nh = 1.2e+21, photon index=2.36, rate=0.123, arf fullrun_mos1_xmm0604060101_pi300-10000_pass1_cl_src1.arf
[Mon Dec 26 01:23:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 01:23:48 2011] Updating source flux to 1e-12