[Sun Dec 18 22:14:28 2011] Detection parameters:
  Position = (376.3, 168.0) = 11 46 52.01 49 35 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.4 +/- 22.5
  Background counts = 148.6
  Rate = 0.01 +/- 0.001

[Sun Dec 18 22:14:29 2011] Off-axis axis estimate = 11.01'
[Sun Dec 18 22:14:45 2011] Using EEF radius (= 11.93 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 22:14:45 2011] Initial guess for spatial extent in simple fitting = 11.93"
[Sun Dec 18 22:14:45 2011] source mask rpix=2.7, npix_max = 42, mask sum = 38, frac = 0.903
[Sun Dec 18 22:14:45 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 11.93"
[Sun Dec 18 22:14:47 2011] fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Dec 18 22:14:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_src5.csv
[Sun Dec 18 22:14:47 2011] fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Dec 18 22:14:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_src5.csv
[Sun Dec 18 22:14:47 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 22:14:47 2011] fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Dec 18 22:14:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Dec 18 22:14:47 2011] fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Dec 18 22:14:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Dec 18 22:14:47 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604020101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 22:14:55 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.966126 pixels away
[Sun Dec 18 22:14:55 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 22:14:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 22:14:55 2011] Assessing source extent using major
[Sun Dec 18 22:14:55 2011] Source does appear to be extended
[Sun Dec 18 22:14:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 22:15:05 2011] Using EEF radius (= 11.93 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 22:15:05 2011] Initial guess for spatial extent in simple fitting = 11.93"
[Sun Dec 18 22:15:05 2011] source mask rpix=2.7, npix_max = 42, mask sum = 38, frac = 0.903
[Sun Dec 18 22:15:05 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 11.93"
[Sun Dec 18 22:15:06 2011] fullrun_pn_xmm0604020101_pi300-10000_cl_pass1_src4.ximg exists
[Sun Dec 18 22:15:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604020101_pi300-10000_cl_pass1_src4.csv
[Sun Dec 18 22:15:06 2011] fullrun_pn_xmm0604020101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Dec 18 22:15:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604020101_pi300-10000_cl_pass1_src4.csv
[Sun Dec 18 22:15:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604020101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604020101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 22:15:06 2011] fullrun_pn_xmm0604020101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Dec 18 22:15:06 2011] fullrun_pn_xmm0604020101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Dec 18 22:15:06 2011] Fit fullrun_pn_xmm0604020101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Dec 18 22:15:12 2011] Source 5 is offset by 4.875731 and -4.365652 pixels which is larger than
2 X fitted extent = 3.362368 x 3.362368, not incorporating fit results
[Sun Dec 18 22:15:12 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 22:15:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 22:15:12 2011] Assessing source extent using major
[Sun Dec 18 22:15:12 2011] Source does appear to be extended
[Sun Dec 18 22:15:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 22:15:23 2011] XMMSAS src. selection expression = ellipse(32691.510559, 14571.688309, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 18 22:15:23 2011] Not overwriting source region fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_src.reg
[Sun Dec 18 22:15:23 2011] Extracting stamp from image fullrun_pn_xmm0604020101_pi300-10000_cl_sm2.00.img.gz, (339, 131) - (414, 206)
[Sun Dec 18 22:15:23 2011] XMMSAS bgd. selection expression = annulus(32691.510559, 14571.688309, 1087.500000, 2175.000000, X, Y)
[Sun Dec 18 22:15:23 2011] Writing fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5.gif
[Sun Dec 18 22:15:26 2011] ../../xmm0604020101/products/events/fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0604020101/products/events/fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Dec 18 22:15:26 2011] Mean detx,y = (42.50, -11449.50) 
[Sun Dec 18 22:15:26 2011] ../../xmm0604020101/products/images/fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_src.img and ../../xmm0604020101/products/images/fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Dec 18 22:15:26 2011] ../../xmm0604020101/products/spectra/fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0604020101/products/spectra/fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun Dec 18 22:15:26 2011] Setting source spectrum file to fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Dec 18 22:15:26 2011] Setting bgd. spectrum file to fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Dec 18 22:15:26 2011] ../../xmm0604020101/products/lightcurves/fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0604020101/products/lightcurves/fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Dec 18 22:15:29 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec 18 22:15:29 2011] rmf not generated due to insufficient counts
[Sun Dec 18 22:15:29 2011] fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Sun Dec 18 22:16:17 2011] Updating aperture counts using extracted products
[Sun Dec 18 22:16:17 2011] Error reading totcts from fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Dec 18 22:16:17 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 22:16:17 2011] Using photon index=1.80, rate=0.0121, arf fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5.arf
[Sun Dec 18 22:16:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 22:16:17 2011] Updating source flux to 6.3e-14
[Sun Dec 18 22:16:23 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Dec 18 22:16:24 2011] xmm0604020101/analysis//spectral/fullrun_pn_xmm0604020101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete