[Thu Aug 16 20:31:50 2012] Detection parameters:
  Position = (366.0, 485.8) = 5 37 44.02 -55 49 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.8 +/- 23.5
  Background counts = 393.5
  Rate = 0.01 +/- 0.002

[Thu Aug 16 20:31:51 2012] Off-axis axis estimate = 14.44'
[Thu Aug 16 20:39:15 2012] Using EEF radius (= 13.65 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 20:39:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 16 20:39:15 2012] Initial guess for spatial extent in simple fitting = 13.65"
[Thu Aug 16 20:39:15 2012] source mask rpix=3.1, npix_max = 52, mask sum = 52, frac = 0.982
[Thu Aug 16 20:39:15 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.65"
[Thu Aug 16 22:57:56 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src4.ximg exists
[Thu Aug 16 22:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src4.csv
[Thu Aug 16 22:57:56 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Aug 16 22:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src4.csv
[Thu Aug 16 22:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 22:57:57 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Aug 16 22:57:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Aug 16 22:57:57 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Aug 16 22:57:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Aug 16 22:57:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:33 2012] Warning, spatial fit 4 centroid is now closest to src. 11
[Fri Aug 17 01:36:33 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:33 2012] Assessing source extent using major
[Fri Aug 17 01:36:33 2012] Source does appear to be extended
[Fri Aug 17 01:36:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 01:36:33 2012] Source is confused with source 11
[Fri Aug 17 01:36:55 2012] Using EEF radius (= 13.65 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 01:36:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 01:36:55 2012] Initial guess for spatial extent in simple fitting = 13.65"
[Fri Aug 17 01:36:55 2012] source mask rpix=3.1, npix_max = 52, mask sum = 52, frac = 0.982
[Fri Aug 17 01:36:55 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.65"
[Fri Aug 17 04:04:49 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 17 04:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src3.csv
[Fri Aug 17 04:04:49 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 17 04:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src3.csv
[Fri Aug 17 04:04:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 04:04:51 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 17 04:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug 17 04:04:51 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 17 04:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug 17 04:04:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:05:55 2012] Source 6 is offset by -3.538722 and -3.288596 pixels which is larger than
2 X fitted extent = 1.599586 x 1.599586, not incorporating fit results
[Fri Aug 17 06:05:55 2012] Warning, spatial fit 3 centroid is now closest to src. 15
[Fri Aug 17 06:05:55 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:05:55 2012] Assessing source extent using major
[Fri Aug 17 06:05:55 2012] Source does appear to be extended
[Fri Aug 17 06:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 06:06:17 2012] XMMSAS src. selection expression = ellipse(31790.659119, 42217.779572, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 06:06:17 2012] Writing source region out to fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src6_src.reg
[Fri Aug 17 06:06:17 2012] Extracting stamp from image fullrun_pn_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (328, 448) - (403, 523)
[Fri Aug 17 06:06:17 2012] XMMSAS bgd. selection expression = annulus(31790.659119, 42217.779572, 1087.500000, 2175.000000, X, Y) && !ellipse(28253.554000, 42262.702000, 2092.792060, 2092.792060, 0.000000, X, Y) && !ellipse(31109.591003, 42267.303833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29525.518219, 42318.211365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30698.311035, 42229.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32354.443970, 42106.740936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28808.373566, 42145.899963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32570.186340, 41723.407806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30426.436035, 41460.092621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33778.060059, 41478.693756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34784.079865, 41344.596191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.968140, 41361.763611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29725.978000, 41052.468000, 2107.632061, 2107.632061, 0.000000, X, Y) && !ellipse(29339.074097, 40683.132812, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 06:06:17 2012] Writing fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src6.gif
[Fri Aug 17 06:24:24 2012] Mean detx,y = (-16290.66, 9346.31) 
[Fri Aug 17 06:24:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 06:24:44 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 06:24:45 2012] Setting source spectrum file to fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 17 06:24:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Aug 17 06:44:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 17 06:44:26 2012] rmf not generated due to insufficient counts
[Fri Aug 17 07:46:18 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:18 2012] Error reading totcts from fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 17 07:46:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:19 2012] Using photon index=1.80, rate=0.01, arf fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src6.arf
[Fri Aug 17 07:46:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:19 2012] Updating source flux to 1.1e-13
[Fri Aug 17 07:48:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 17 07:49:34 2012] xmm0604010801/analysis//spectral/fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete