[Thu Aug 16 20:31:50 2012] Detection parameters:
  Position = (324.6, 488.9) = 5 38 5.38 -55 49 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.7 +/- 34.6
  Background counts = 362.3
  Rate = 0.02 +/- 0.003

[Thu Aug 16 20:31:51 2012] Off-axis axis estimate = 13.94'
[Thu Aug 16 20:39:15 2012] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 20:39:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 16 20:39:15 2012] Initial guess for spatial extent in simple fitting = 13.40"
[Thu Aug 16 20:39:15 2012] source mask rpix=3.1, npix_max = 51, mask sum = 55, frac = 1.073
[Thu Aug 16 20:39:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.40"
[Thu Aug 16 22:57:56 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 16 22:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 22:57:56 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 16 22:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 22:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 22:57:57 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 16 22:57:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug 16 22:57:57 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 16 22:57:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug 16 22:57:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:33 2012] Warning, spatial fit 1 centroid is now closest to src. 34
[Fri Aug 17 01:36:33 2012] Source 3 is offset by 4.052013 and -6.379262 pixels which is larger than
2 X fitted extent = 1.528483 x 1.528483, not incorporating fit results
[Fri Aug 17 01:36:33 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.391011 pixels away
[Fri Aug 17 01:36:33 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:33 2012] Assessing source extent using major
[Fri Aug 17 01:36:33 2012] Source does appear to be extended
[Fri Aug 17 01:36:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 01:36:33 2012] Source is confused with source 13
[Fri Aug 17 01:36:55 2012] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 01:36:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 01:36:55 2012] Initial guess for spatial extent in simple fitting = 13.40"
[Fri Aug 17 01:36:55 2012] source mask rpix=3.1, npix_max = 51, mask sum = 55, frac = 1.073
[Fri Aug 17 01:36:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.40"
[Fri Aug 17 04:04:49 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 17 04:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 04:04:49 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 17 04:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 04:04:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 04:04:51 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 17 04:04:51 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 17 04:04:51 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 17 04:04:51 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 17 04:04:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:05:55 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Fri Aug 17 06:05:55 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.391011 pixels away
[Fri Aug 17 06:05:55 2012] Spatial fit model total counts = 3935.730000, observed total counts = 3681.000000
[Fri Aug 17 06:05:55 2012] Offset between fit and detection position for source 3 = 2.710328 pixels
[Fri Aug 17 06:05:55 2012] Warning, changing simple spatial fit ID from 1 to 11
[Fri Aug 17 06:05:55 2012] 3502.566000 total counts/ 2785.730000 bgd. counts: snr = 13.581580
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.710328 pixels
  Position = (325.3, 486.3) = 5 38 5.01 -55 49 17.1
  Extent = 26.2 (26.1-52.3)", rotation angle = 0
  Source counts = 716.8 +/- 59.2
  Background counts = 2785.7
  Rate = 0.1 +/- 0.01
[Fri Aug 17 06:05:55 2012] Spatial fit model total counts = 4007.240000, observed total counts = 3491.000000
[Fri Aug 17 06:05:55 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 17 06:05:55 2012] Spatial fit model total counts = 3744.420000, observed total counts = 2029.000000
[Fri Aug 17 06:05:55 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 17 06:05:55 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:05:55 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 06:05:55 2012] Source does appear to be extended
[Fri Aug 17 06:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 06:06:17 2012] XMMSAS src. selection expression = ellipse(28253.554000, 42262.702000, 1569.594045, 1569.594045, 0.000000, X, Y)
[Fri Aug 17 06:06:17 2012] Writing source region out to fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 17 06:06:17 2012] Extracting stamp from image fullrun_pn_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (235, 396) - (416, 577)
[Fri Aug 17 06:06:17 2012] XMMSAS bgd. selection expression = annulus(28253.554000, 42262.702000, 2615.990075, 5231.980151, X, Y) && !ellipse(31109.591003, 42267.303833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31790.659119, 42217.779572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29525.518219, 42318.211365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25348.506653, 42131.902649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30698.311035, 42229.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26311.265411, 42158.041412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32354.443970, 42106.740936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28808.373566, 42145.899963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.141541, 41997.836945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28730.222778, 41631.647339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32570.186340, 41723.407806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30426.436035, 41460.092621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24228.522369, 41613.757751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33778.060059, 41478.693756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26718.212372, 41953.253693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25169.905487, 41722.749359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.968140, 41361.763611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29725.978000, 41052.468000, 2107.632061, 2107.632061, 0.000000, X, Y) && !ellipse(24094.039825, 41074.980621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.356537, 41020.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27406.220734, 41359.047516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26260.118400, 41272.485460, 506.881615, 506.881615, 0.000000, X, Y) && !ellipse(24017.338684, 40681.048615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29339.074097, 40683.132812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27302.920000, 40053.386000, 1985.496057, 1985.496057, 0.000000, X, Y) && !ellipse(27408.405823, 42446.815674, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 06:06:17 2012] Writing fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src3.gif
[Fri Aug 17 06:22:48 2012] Mean detx,y = (-13644.91, 11524.58) 
[Fri Aug 17 06:22:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 06:23:34 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 06:23:34 2012] Setting source spectrum file to fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug 17 06:23:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 17 07:46:18 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:18 2012] Error reading totcts from fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug 17 07:46:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:19 2012] Using photon index=1.80, rate=0.118, arf fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src3.arf
[Fri Aug 17 07:46:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:19 2012] Updating source flux to 9.7e-13
[Fri Aug 17 07:48:13 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Fri Aug 17 07:48:13 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Fri Aug 17 07:48:13 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Fri Aug 17 07:49:34 2012] xmm0604010801/analysis//spectral/fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete